268 Rwhp!
#1
268 Rwhp!
Just Got my baby Dynoed, Mods= Greddy Turbo,Rp Midpipe,Racingbeat Lightened Flywheel, Additional Walbro fuel pump, and fuel press regulator, Borla Catback, Racingbeat Ingnition wires.
first pull= 263 rwhp @ 7.7 pnds of boost
2nd pull= 268 rwhp @ 7.7 pnds of boost
no detonation, no problems
If ya ask me Im Pretty Happy with those results lol
i will post dyno sheets as soon as i get my computer back.
first pull= 263 rwhp @ 7.7 pnds of boost
2nd pull= 268 rwhp @ 7.7 pnds of boost
no detonation, no problems
If ya ask me Im Pretty Happy with those results lol
i will post dyno sheets as soon as i get my computer back.
#4
I have an RX-8. Cool.
Join Date: Nov 2004
Location: Morris County, New Jersey
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
wow! very impressive. so how much has all those parts added up to cost you? with and without installation (if you didn't install yourself). lol i am very jealous but also proud
#8
Storm Trooper
Join Date: May 2004
Location: Freakmont, CA
Posts: 3,908
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JeRKy 8 Owner
So his engine makes like 340 horses to the crank now (20% loss -- 270whp)? Thats like a damn M3
#15
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
Wow, nice! :D
So, hmmm... lets say Mazda's 238 BHP number is correct (possible, but...) Anyway, taking an average of RWHP people have dyno'd at, say, 185 WHP, that's a 22% drivetrain loss. So... 268 WHP + 22% = ~327 BHP. Not too shabby, I'd say! :D
Also sounds like the other mods (HF cat, Borla, flywheel, etc) are starting to really make a difference with a turbo'd car. 268 WHP - 240 WHP dyno I've seen so far for the Greddy = 28 WHP gain from those. Sweet! Makes me wonder what the SSR kit at 285 WHP plus these mods'll do. 285+28=313 WHP, +22% = ~382 BHP! :D
So, hmmm... lets say Mazda's 238 BHP number is correct (possible, but...) Anyway, taking an average of RWHP people have dyno'd at, say, 185 WHP, that's a 22% drivetrain loss. So... 268 WHP + 22% = ~327 BHP. Not too shabby, I'd say! :D
Also sounds like the other mods (HF cat, Borla, flywheel, etc) are starting to really make a difference with a turbo'd car. 268 WHP - 240 WHP dyno I've seen so far for the Greddy = 28 WHP gain from those. Sweet! Makes me wonder what the SSR kit at 285 WHP plus these mods'll do. 285+28=313 WHP, +22% = ~382 BHP! :D
#21
Im also using a walbro 255, My mechanics are the best SMOKINJOERACING.NET aka J&R Performance, the midpipe made a huge dif, the car is completely catless (Basicly runnin a straight pipe) the mipipe made boost raise from 5.3 to 7.7. She BREATHIN BETTER BOYS. that cat crap holds her back, the only problem was without the extra fuel pressure she was detonating in the high gears, but no more, my mechanic controls the walbro seperatly some how,but im dyin to post these sheets.STILL STALLING WITH THIS BOV Thats my only prob, n by the way traction no longer excists haha, Thank god i just got Sponsored soo hopefully i got some rubber.
#24
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
We also installed the same Walbro 255 and now we don't have detonation in the dyno
in 4 gear. It's a great modification that would help to get more HP in the future...........
Manuel
in 4 gear. It's a great modification that would help to get more HP in the future...........
Manuel