3 Rotor RX8 PR
#501
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by adrian-1
Nice.
My best 1/8th is 8.5sec at 84mph with the Greddy turbo and interceptor x(microtech). Although the boost falls off to 7psi in high rpms.
Any plans to take it to a 1/4mi track?
My best 1/8th is 8.5sec at 84mph with the Greddy turbo and interceptor x(microtech). Although the boost falls off to 7psi in high rpms.
Any plans to take it to a 1/4mi track?
The 1/8 mile time slips that's manuels post it was with the tires spinning on firts and second gears he looses .9 or more tenths during the lauch. He cant lauch his car above the 2000 RPM without the tires spinning i think with a good traction the car runs easy on low 7s with low boost 8 PSI Mode and in the 6s with 14 PSI.
Rgonza
#502
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
I need to buy for a friend a Rx8 factory 4.44 differential, only the gears (ring and pinion)
does any one have one used for sale?
Where I can buy a new one?
please if any one can help me let me know!
Thanks,
Manuel
I need to buy for a friend a Rx8 factory 4.44 differential, only the gears (ring and pinion)
does any one have one used for sale?
Where I can buy a new one?
please if any one can help me let me know!
Thanks,
Manuel
#504
Originally Posted by RX8PR
Hello,
I need to buy for a friend a Rx8 factory 4.44 differential, only the gears (ring and pinion)
does any one have one used for sale?
Where I can buy a new one?
please if any one can help me let me know!
Thanks,
Manuel
I need to buy for a friend a Rx8 factory 4.44 differential, only the gears (ring and pinion)
does any one have one used for sale?
Where I can buy a new one?
please if any one can help me let me know!
Thanks,
Manuel
Hay que joderse con estos Hibaros coño
Y yo tengo un pana en el diler que le pudo preguntar si tene estas piesas, porsupusto al costo de empleado porque a precio normal esta del carajo.
Last edited by Daver; 03-28-2006 at 09:04 PM.
#505
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Sorry!
I already cleaned my inbox, please send me any PM again.
Thanks,
Daver,
Habla con tu pana a ver que precio te da.............
Guevon,
Jibaro es con "J" no con "h"
Saludos,
Manuel
I already cleaned my inbox, please send me any PM again.
Thanks,
Daver,
Habla con tu pana a ver que precio te da.............
Guevon,
Jibaro es con "J" no con "h"
Saludos,
Manuel
#506
Originally Posted by RX8PR
Sorry!
I already cleaned my inbox, please send me any PM again.
Thanks,
Daver,
Habla con tu pana a ver que precio te da.............
Guevon,
Jibaro es con "J" no con "h"
Saludos,
Manuel
I already cleaned my inbox, please send me any PM again.
Thanks,
Daver,
Habla con tu pana a ver que precio te da.............
Guevon,
Jibaro es con "J" no con "h"
Saludos,
Manuel
#507
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Daver
Mira Guevon, limpia el buzon, !Que no te puedo enviar mensajes !
Hay que joderse con estos Hibaros coño
Y yo tengo un pana en el diler que le pudo preguntar si tene estas piesas, porsupusto al costo de empleado porque a precio normal esta del carajo.
Hay que joderse con estos Hibaros coño
Y yo tengo un pana en el diler que le pudo preguntar si tene estas piesas, porsupusto al costo de empleado porque a precio normal esta del carajo.
Jjaja, Saludos Chango!!!
Rgonza
#508
Originally Posted by rgonza
Jjaja, Saludos Chango!!!
Rgonza
Rgonza
I asked him, and his cost is $687.27
Last edited by Daver; 03-29-2006 at 07:41 PM.
#510
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Tomorrow we're goin to install the fuel pump speed controller
on my car, this would help on controlling hot fuel problem
that I have right now.........
http://www.aeromotiveinc.com/pdetail.php?prod=31
Manuel
on my car, this would help on controlling hot fuel problem
that I have right now.........
http://www.aeromotiveinc.com/pdetail.php?prod=31
Manuel
#511
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
friends,
this fuel pump speed controller works perfectly............
We installed it at rgonza garage and them I maked the trip to my house
(1 hour) and when I arrive there was no noise on the fuel pump.
In the past when I arrive to my house the fuel pump was making a big noise caused by the hot gasoline.
The car respond with "cooler" gasoline is a lot better.
We also installed a catch can for the oil.
next step is to change the differential to a 4.10
Regards,
Manuel
this fuel pump speed controller works perfectly............
We installed it at rgonza garage and them I maked the trip to my house
(1 hour) and when I arrive there was no noise on the fuel pump.
In the past when I arrive to my house the fuel pump was making a big noise caused by the hot gasoline.
The car respond with "cooler" gasoline is a lot better.
We also installed a catch can for the oil.
next step is to change the differential to a 4.10
Regards,
Manuel
#514
Originally Posted by Moostafa29
You Puerto Ricans are definitely in a league of your own. Great job Manuel.
Originally Posted by RX8PR
friends,
this fuel pump speed controller works perfectly............
We installed it at rgonza garage and them I maked the trip to my house
(1 hour) and when I arrive there was no noise on the fuel pump.
In the past when I arrive to my house the fuel pump was making a big noise caused by the hot gasoline.
The car respond with "cooler" gasoline is a lot better.
We also installed a catch can for the oil.
next step is to change the differential to a 4.10
Regards,
Manuel
this fuel pump speed controller works perfectly............
We installed it at rgonza garage and them I maked the trip to my house
(1 hour) and when I arrive there was no noise on the fuel pump.
In the past when I arrive to my house the fuel pump was making a big noise caused by the hot gasoline.
The car respond with "cooler" gasoline is a lot better.
We also installed a catch can for the oil.
next step is to change the differential to a 4.10
Regards,
Manuel
Last edited by Daver; 04-02-2006 at 02:01 PM.
#515
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
This afternoon I went to the teathers with my wife and evo
begins to acelerate in a red light, probably he was thinking "piece of cake"
my wife hates my RX8, but I just tell her "you would enjoy his face"
When the ligth changes to green I launch the car at just 2,500 rpms
but this car responds so quickly that the evo can't keep with me, my wife
don't like to run so she inmidiedly begins to scream "stop" "stop"
on the next ligth the guy on the evo tell me "wow, someone tell me that those RX8
don't run". I just smile to him........................
Manuel
begins to acelerate in a red light, probably he was thinking "piece of cake"
my wife hates my RX8, but I just tell her "you would enjoy his face"
When the ligth changes to green I launch the car at just 2,500 rpms
but this car responds so quickly that the evo can't keep with me, my wife
don't like to run so she inmidiedly begins to scream "stop" "stop"
on the next ligth the guy on the evo tell me "wow, someone tell me that those RX8
don't run". I just smile to him........................
Manuel
#516
Zoom-Freakin'-Zoom
iTrader: (5)
Originally Posted by RX8PR
This afternoon I went to the teathers with my wife and evo
begins to acelerate in a red light, probably he was thinking "piece of cake"
my wife hates my RX8, but I just tell her "you would enjoy his face"
When the ligth changes to green I launch the car at just 2,500 rpms
but this car responds so quickly that the evo can't keep with me, my wife
don't like to run so she inmidiedly begins to scream "stop" "stop"
on the next ligth the guy on the evo tell me "wow, someone tell me that those RX8
don't run". I just smile to him........................
Manuel
begins to acelerate in a red light, probably he was thinking "piece of cake"
my wife hates my RX8, but I just tell her "you would enjoy his face"
When the ligth changes to green I launch the car at just 2,500 rpms
but this car responds so quickly that the evo can't keep with me, my wife
don't like to run so she inmidiedly begins to scream "stop" "stop"
on the next ligth the guy on the evo tell me "wow, someone tell me that those RX8
don't run". I just smile to him........................
Manuel
PRICELESS!!!!!
beers
#520
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Yesteday was the photo shooting of my car for the supercompacto magazine,
it was great, they taked near 288 pictures and we finished near 1:00 am.
the car would be on the next magazine with a profile of 4-7 pages
the magazine is on sale in Puerto Rico, Miami, Dominican Republic and
some countries in South and Central America.
there web site is http://supercompacto.com/index2.html
who whant to buy the magazine?
ME!
Regards,
Manuel
it was great, they taked near 288 pictures and we finished near 1:00 am.
the car would be on the next magazine with a profile of 4-7 pages
the magazine is on sale in Puerto Rico, Miami, Dominican Republic and
some countries in South and Central America.
there web site is http://supercompacto.com/index2.html
who whant to buy the magazine?
ME!
Regards,
Manuel
#521
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Rgonza and I buyed new wastegates we're moving to 60mm one's.
Robert is already installing it. I'm waiting for mine!
rgonza still working on his car, but he is trying to finish it ASAP.
Manuel
Robert is already installing it. I'm waiting for mine!
rgonza still working on his car, but he is trying to finish it ASAP.
Manuel
#523
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
last mods
60 mm. wastegate , Ron davis two 1 1/2" rows radiator, bigger exhaust manifold 3 1/2" wide , 80mm. turbo impeller and 1.32 exhaust scroll, installed.!!!
The runs like a 50 % more horse power without falling the the boost pressure at high RPM now i can keep the 14 psi all the way up to 10,000 rpm . here some pics.
rgonza
The runs like a 50 % more horse power without falling the the boost pressure at high RPM now i can keep the 14 psi all the way up to 10,000 rpm . here some pics.
rgonza