3 Rotor RX8 PR
#776
Thanks Rgonza, can you please send me the pictures as you say... But also would you have this friend of yours, make me these motor mounts... PM me with all info and pricing.. This will be greatly appreciated...Rich.
#780
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Hey Rob please see your pms...This thread will make me crazy one day.
How close to the end is the renesis project?I know alot of kms must be done to be sure but i trust you from all your job so far rob..U2 guys are amazing
How close to the end is the renesis project?I know alot of kms must be done to be sure but i trust you from all your job so far rob..U2 guys are amazing
Last edited by GrRx8MaZdA; 08-25-2006 at 07:13 PM.
#781
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
rob,
Ramon is goin to use the pressure plate and clutch
that I have in my house so I need to see you in the next days.
I talked to him today and he can't sleep thinking on his car.
Manuel
Ramon is goin to use the pressure plate and clutch
that I have in my house so I need to see you in the next days.
I talked to him today and he can't sleep thinking on his car.
![Hahano](https://www.rx8club.com/images/smilies/hahano.gif)
Manuel
#782
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
Hey Rob please see your pms...This thread will make me crazy one day.
How close to the end is the renesis project?I know alot of kms must be done to be sure but i trust you from all your job so far rob..U2 guys are amazing
How close to the end is the renesis project?I know alot of kms must be done to be sure but i trust you from all your job so far rob..U2 guys are amazing
Around 1 week more!!!!Thanks
#783
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX8PR
rob,
Ramon is goin to use the pressure plate and clutch
that I have in my house so I need to see you in the next days.
I talked to him today and he can't sleep thinking on his car.
Manuel
Ramon is goin to use the pressure plate and clutch
that I have in my house so I need to see you in the next days.
I talked to him today and he can't sleep thinking on his car.
![Hahano](https://www.rx8club.com/images/smilies/hahano.gif)
Manuel
Ramon call me today for about the clutch assbly. now i'm very close to finish his car the only that i've left is the intercooler piping installation..
Rob
#785
Originally Posted by RX8PR
I have interest on the Mazdaspeed Side Skirt Set Painted on velocity red
does anyone know where I can find the best price?
I checked rosenthal mazda but their side said only for local pick up.
thanks,
Manuel
does anyone know where I can find the best price?
I checked rosenthal mazda but their side said only for local pick up.
thanks,
Manuel
Bro, enviame un PM, I can help you out if its Rosenthal Mazda in VA; I live 30 minutes away
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
#786
Originally Posted by Greddyturbo1
Thanks Rgonza, can you please send me the pictures as you say... But also would you have this friend of yours, make me these motor mounts... PM me with all info and pricing.. This will be greatly appreciated...Rich.
Rgonza, please send pics and pricing for mounts... Thanks
#789
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
At least you need near $15,000 in parts without labor.
I think that you can make it without shipping the car to PR,
Talk to Acosta Racing in the US they can make the swap for you.
Manuel
I think that you can make it without shipping the car to PR,
Talk to Acosta Racing in the US they can make the swap for you.
Manuel
#791
Originally Posted by RX8PR
At least you need near $15,000 in parts without labor.
I think that you can make it without shipping the car to PR,
Talk to Acosta Racing in the US they can make the swap for you.
Manuel
I think that you can make it without shipping the car to PR,
Talk to Acosta Racing in the US they can make the swap for you.
Manuel
#793
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Some action from the DFurious wheels auto show...........
The Super Compacto models with my 8.
A nurse...............
and the major league 3 Rotor RX8 that makes 6.81 on the 1/4 mile,
It's just 0.01 behind the Ibarra record.
The Super Compacto models with my 8.
A nurse...............
![Wconfused](https://www.rx8club.com/images/smilies/Wconfused.gif)
and the major league 3 Rotor RX8 that makes 6.81 on the 1/4 mile,
It's just 0.01 behind the Ibarra record.
#794
Originally Posted by RX8PR
I have the stock one's..........
Manuel
Manuel
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
anyhoo, can i give you a call sometime? i'm curious to know what other modifications i need to look into to make the car a daily driver w/ the 20b. i'll be upgrading driveshaft for sure, but have you done any suspension upgrades? i'm not looking to build a drag car; i'm more into autox & autotracks.
thanks.
#795
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
No we don't have suspension upgrades until now.............
rigth now we're working on try to install a harder transmission.
The first think that you need to do is install the 20B, then move forward
to the other upgrades.
regards,
Manuel
rigth now we're working on try to install a harder transmission.
The first think that you need to do is install the 20B, then move forward
to the other upgrades.
regards,
Manuel
#796
got ya.
please keept us posted on which tranny you decided to install. i'm thinking of installing a sequantial tranny, and am debating on a few models.
thanks!
please keept us posted on which tranny you decided to install. i'm thinking of installing a sequantial tranny, and am debating on a few models.
thanks!
Originally Posted by RX8PR
No we don't have suspension upgrades until now.............
rigth now we're working on try to install a harder transmission.
The first think that you need to do is install the 20B, then move forward
to the other upgrades.
regards,
Manuel
rigth now we're working on try to install a harder transmission.
The first think that you need to do is install the 20B, then move forward
to the other upgrades.
regards,
Manuel
#797
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stickmantijuana
got ya.
please keept us posted on which tranny you decided to install. i'm thinking of installing a sequantial tranny, and am debating on a few models.
thanks!
please keept us posted on which tranny you decided to install. i'm thinking of installing a sequantial tranny, and am debating on a few models.
thanks!
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
Last edited by rgonza; 09-03-2006 at 11:43 AM.
#798
M5 SMG?? how much can you get it for? i assume you're talking about the electronically controlled sequential tranny w/ paddle shift? if you could do that to 20b'd rx8, i wouldn't buy a 360 even if i had the money.
i'm going to go w/ sequential for sure. so that doesn't leave me with many choices. anyhoo, m5 smg sounds very exciting!![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
by the way, have you done any suspension mods? what have you broken so far?
i'm going to go w/ sequential for sure. so that doesn't leave me with many choices. anyhoo, m5 smg sounds very exciting!
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
by the way, have you done any suspension mods? what have you broken so far?
Last edited by stickmantijuana; 09-03-2006 at 03:23 PM.
#799
Rumor has it that my employer may offer us buyout packages in the $140K range. If so, I lean very heavily in favor of taking it and using that startup capital for the titanium PPF, rear axles, and rear links projects. Let's pray Ford Motor comes through so I can get busy on helping you 20B/RX-8 guys. As for me, I am happy (so far) with my nitroused Renny.
Hill/Paradox
Hill/Paradox
#800
charles,
what sort of links would you make for the rear? go with heim or reinforced nylon or ptfe bushings?
my only option seems to be heim at this moment, but i'm a bit hesitant since this will be a daily driver and i don't want the ride to be too loud or too rough for the street (street here is very bad).
anyways, let me know! thanks!
what sort of links would you make for the rear? go with heim or reinforced nylon or ptfe bushings?
my only option seems to be heim at this moment, but i'm a bit hesitant since this will be a daily driver and i don't want the ride to be too loud or too rough for the street (street here is very bad).
anyways, let me know! thanks!
Originally Posted by Charles R. Hill
Rumor has it that my employer may offer us buyout packages in the $140K range. If so, I lean very heavily in favor of taking it and using that startup capital for the titanium PPF, rear axles, and rear links projects. Let's pray Ford Motor comes through so I can get busy on helping you 20B/RX-8 guys. As for me, I am happy (so far) with my nitroused Renny.
Hill/Paradox
Hill/Paradox