3 Rotor RX8 PR
#926
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rgonza
GrRx8MaZdA] with the 3mm. you will find hard crank starting.
What do you mean by this phrase Rob???I want my car for both street racing and track racing...Will i have problems??I mean i go for drinks or coffee with my car...
#927
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
I have one bosch 044 fuel pump and the Aeromotive Fuel Pressure Regulator A1000-6.
Do i need the aeromotive fuel pump speed controller or this is only for 2 in line pumps??
Do i need the aeromotive fuel pump speed controller or this is only for 2 in line pumps??
#930
Mazsport.net
Join Date: Mar 2005
Location: In the shop
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
I m going to leave some night sleeps to manage the connection of the wires etc for the microtech and the stock ecu to run everything perfect...Except the rx8 crank sensor i have to install in the fd motor,what else should i need to have all the rx8 electrical devices to work perfect??
#931
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Did you understand exactly what i want??The microtech has all the harnesses needed for the fd motor..But i have to make modifications on the stock ecu....Can you help me on this???
#932
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Hey Rob do i need MSD Blaster SS Coils??Or another model?Which and how many coils???4?
i ll have the microtech lt-10s ecu for the fd motor managment and the microtech x4 ignition enhancer..Should i get msd or microtech coils and how much?And what else to be good should i buy?4coils??Or 2??
i ll have the microtech lt-10s ecu for the fd motor managment and the microtech x4 ignition enhancer..Should i get msd or microtech coils and how much?And what else to be good should i buy?4coils??Or 2??
Last edited by GrRx8MaZdA; 12-30-2006 at 09:10 AM.
#933
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
Hey Rob do i need MSD Blaster SS Coils??Or another model?Which and how many coils???4?
i ll have the microtech lt-10s ecu for the fd motor managment and the microtech x4 ignition enhancer..Should i get msd or microtech coils and how much?And what else to be good should i buy?4coils??Or 2??
i ll have the microtech lt-10s ecu for the fd motor managment and the microtech x4 ignition enhancer..Should i get msd or microtech coils and how much?And what else to be good should i buy?4coils??Or 2??
Hi, GrRx8MaZdA The microtec ecu come with it's prefabricate wire loom and it's very easy to install just follow the wiring diagram in the supplied user manual, you should use either Blaster SS or Bosh coil it's need 4 coils 2 for trailing spark plugs and 2 for leadings spark plugs for ignition enhancer you should consider buy XS engineeering Power Pack this power Pack will increase the voltage on the coil Positive side up to 20 vdc insted of 12 vdc, if you install this ecu remenber what's kind of trigger you use, for installation on rx8 you will need to keep the factory crank trigger wheel to keep the PS and gage cluster working.
#934
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
What exactly is the crank trigger wheel that i should have it from my 8?Also the rx8 crank sensor must be installed right?
Also Rob the lt10-s come in pack with the ignition x4 enhancer?Shouldn't i use it and buy the XS engineeering Power Pack to use with the lt10s??
XS Engineering RX7 Power Pack II???And especially for rx7 not universal right??
THIS: http://www.horsepowerfreaks.com/pric...nition_Systems
The msd blaster ss coils and the xs engineering power pack II will work with the microtech lt10s ecu or i will have a problem??
Also Rob the lt10-s come in pack with the ignition x4 enhancer?Shouldn't i use it and buy the XS engineeering Power Pack to use with the lt10s??
XS Engineering RX7 Power Pack II???And especially for rx7 not universal right??
THIS: http://www.horsepowerfreaks.com/pric...nition_Systems
The msd blaster ss coils and the xs engineering power pack II will work with the microtech lt10s ecu or i will have a problem??
Last edited by GrRx8MaZdA; 12-31-2006 at 09:05 AM.
#935
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
What exactly is the crank trigger wheel that i should have it from my 8?Also the rx8 crank sensor must be installed right?
Also Rob the lt10-s come in pack with the ignition x4 enhancer?Shouldn't i use it and buy the XS engineeering Power Pack to use with the lt10s??
XS Engineering RX7 Power Pack II???And especially for rx7 not universal right??
THIS: http://www.horsepowerfreaks.com/pric...nition_Systems
The msd blaster ss coils and the xs engineering power pack II will work with the microtech lt10s ecu or i will have a problem??
Also Rob the lt10-s come in pack with the ignition x4 enhancer?Shouldn't i use it and buy the XS engineeering Power Pack to use with the lt10s??
XS Engineering RX7 Power Pack II???And especially for rx7 not universal right??
THIS: http://www.horsepowerfreaks.com/pric...nition_Systems
The msd blaster ss coils and the xs engineering power pack II will work with the microtech lt10s ecu or i will have a problem??
Yes the power pack work fine with this ecu the only mod is decrease the dwell time to 2.20 ms. we have this power pack intalled in our cars using haltech and microtech (RX8PR) and it work fine, this unit are universal fit to all direct fire cars. the lt-10s come with ignitor amplifiier but this is weak at high rpm the voltage drops at high loads.
For the crank triggers is betters use the factory one, remenber when ordering the ecu tell the sales man that you need it to run on factory rx8 crank trigger that's ecu is not configurable (Microtech) for diferents trigger is only set from factory to run only one.
#936
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Oneevil,
On my next trip to NY I would send you a PM,
I have on schedule to pass a few days on
Manhattan and in any NY snow park next christmas.
Grrx8mazda,
The XS engineering Power Pack can be installed on almost any vehicule
but "dwell time adjustments may be required" read their instructions
on their site.
http://www.xs-engineering.com/xsstor...&idproduct=604
happy New year to every one!
Manuel
On my next trip to NY I would send you a PM,
I have on schedule to pass a few days on
Manhattan and in any NY snow park next christmas.
Grrx8mazda,
The XS engineering Power Pack can be installed on almost any vehicule
but "dwell time adjustments may be required" read their instructions
on their site.
http://www.xs-engineering.com/xsstor...&idproduct=604
happy New year to every one!
Manuel
#937
Mazsport.net
Join Date: Mar 2005
Location: In the shop
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
Did you understand exactly what i want??The microtech has all the harnesses needed for the fd motor..But i have to make modifications on the stock ecu....Can you help me on this???
#939
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Is there any other place i can have my lt10s for the fd3s motor and the crank trigger for the rx8 i need to have the swap and everything working????
The guys in australia seem to have holidays due to christmas and i really need my ecu...
The guys in australia seem to have holidays due to christmas and i really need my ecu...
#940
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
I ve made a decision and cause i want only the best and because i can't have jon every day in my door if i have a problem,i ve gone with AUTRONIC SM4...Very expensice but a lot better than microtech
#941
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
You can buy the microtech in a lot of web pages
you can find it on ebay.
http://cgi.ebay.com/ebaymotors/MICRO...spagenameZWD1V
you can find it on ebay.
http://cgi.ebay.com/ebaymotors/MICRO...spagenameZWD1V
#942
90% Carbon-100% Power
Join Date: Apr 2004
Location: Thessaloniki,GREECE
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
You probably didn't read my last post my friend.I already gone to Autronic SM4...Its a lot better unit and in my case it will help me a lot...I can't buy microtech from a site cause i need special unit to have the fd3s harnesses but set up for rx8 crank trigger...
#943
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
I readed your post.........................
that harness is causing to you a lot of confuse,
I hope you can ressolve that.
I really don't know someone in PR that is using that ECU so I don't know
how difficult would be to tune the autronic,
one of the advantages of using microtech is that a lot of tunners knows
how to work with them.
good luck!
Manuel
that harness is causing to you a lot of confuse,
I hope you can ressolve that.
I really don't know someone in PR that is using that ECU so I don't know
how difficult would be to tune the autronic,
one of the advantages of using microtech is that a lot of tunners knows
how to work with them.
good luck!
Manuel
#944
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GrRx8MaZdA
You probably didn't read my last post my friend.I already gone to Autronic SM4...Its a lot better unit and in my case it will help me a lot...I can't buy microtech from a site cause i need special unit to have the fd3s harnesses but set up for rx8 crank trigger...
#946
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
You can find 20B engines in Puerto Rico for near $4,200.00 but shipping and transit time to Sydney would be a lot , I think that you can try to find it on Japan or in your country...........
is difficult to find them in Australia?
Manuel
is difficult to find them in Australia?
Manuel
#950
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
I talked to my friend in PR that buy engines from Japan,
he buy full vanloads of different types of engines and sale them in Puerto Rico,
right now he don't have a 3 rotor on stock but he already called his contacts on Japan
to find 3 rotor engines, it takes like a month or more
for the engines to arrive but if they arrive I'm goin to buy at least
one engine to have it as spare engine. If my friend find more engines
I'm goin to buy all of them, at least I can sale one to rgonza at the cost of course.
He tell me that the guy from Japan says that on this moments is difficult to find them.
Manuel
he buy full vanloads of different types of engines and sale them in Puerto Rico,
right now he don't have a 3 rotor on stock but he already called his contacts on Japan
to find 3 rotor engines, it takes like a month or more
for the engines to arrive but if they arrive I'm goin to buy at least
one engine to have it as spare engine. If my friend find more engines
I'm goin to buy all of them, at least I can sale one to rgonza at the cost of course.
He tell me that the guy from Japan says that on this moments is difficult to find them.
Manuel