3 Rotor RX8 PR
09-14-2007, 10:43 AM
#1101
RotoRocks Powered
09-14-2007, 10:50 AM
#1103
I plan on doing the install myself.
thinking 4500 for the motor. But I think I can find it cheaper
Last edited by Speedrx8er; 09-14-2007 at 10:52 AM.
09-14-2007, 11:48 AM
#1104
the engine was around 4000.
But I spent over 20G's. but I bought the best parts I could find
turbo alone was 2000 plus all its parts ( wastegate, blowoff)
the Haltech was 1400 ( E11V2)
the gauges were 1800 ( you dont need those)
the engine had some work doe ( port, and all new internals parts ( exept the rotors ofcourse))
and many more...
the clucth ( you need a real good one for this mosnter)
So if you go conservative and you do it yourself you can probably make it from 10 G's up
But I spent over 20G's. but I bought the best parts I could find
turbo alone was 2000 plus all its parts ( wastegate, blowoff)
the Haltech was 1400 ( E11V2)
the gauges were 1800 ( you dont need those)
the engine had some work doe ( port, and all new internals parts ( exept the rotors ofcourse))
and many more...
the clucth ( you need a real good one for this mosnter)
So if you go conservative and you do it yourself you can probably make it from 10 G's up
09-14-2007, 01:10 PM
#1107
the engine was around 4000.
But I spent over 20G's. but I bought the best parts I could find
turbo alone was 2000 plus all its parts ( wastegate, blowoff)
the Haltech was 1400 ( E11V2)
the gauges were 1800 ( you dont need those)
the engine had some work doe ( port, and all new internals parts ( exept the rotors ofcourse))
and many more...
the clucth ( you need a real good one for this mosnter)
So if you go conservative and you do it yourself you can probably make it from 10 G's up
But I spent over 20G's. but I bought the best parts I could find
turbo alone was 2000 plus all its parts ( wastegate, blowoff)
the Haltech was 1400 ( E11V2)
the gauges were 1800 ( you dont need those)
the engine had some work doe ( port, and all new internals parts ( exept the rotors ofcourse))
and many more...
the clucth ( you need a real good one for this mosnter)
So if you go conservative and you do it yourself you can probably make it from 10 G's up
Yes I plan on doing it myself with some help here and there from some of the mnrx8club members
Hope to get the egine soon then I can start yanking everything apart.
once the engine is in place and working. I'll start on the turbo.
Do you have a picture of your engine mount? I heard you'll have to move the mount forward.
09-17-2007, 03:47 PM
#1110
Absolute Rotary Madness
Join Date: Mar 2004
Location: Thessaloniki, Greece
Posts: 1,291
Likes: 0
Received 0 Likes
on
0 Posts
great job mate, I loved your videos.... nice looks too. who cares about the orange side lamps when you're dedicated to make it bloody fast, huh?
09-21-2007, 09:15 AM
#1111
Hermanos! Me mude de regreso a la Isla! Mi FD no podra competir con sus mostros pero olvidese, yo todavia tengo las turbinas gemelas originales. Donde me recomiendan q lleve el carro pa q me tuneen la PowerFC? Y me gustaria ver sus carros y salir a dar una vuelta por ahi con el mio...
09-23-2007, 07:31 PM
#1112
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Neit,
next Sunday (Sept 30) is the national mazda day in Hatillo,
We would be there (rgonza and I) and also you can meet all the guys from www.rotorespr.net
Manuel
next Sunday (Sept 30) is the national mazda day in Hatillo,
We would be there (rgonza and I) and also you can meet all the guys from www.rotorespr.net
Manuel
09-30-2007, 09:54 PM
#1114
both OK
Althought my car ( blue) is in USA It says PUERTO RICO all over it. RGONZA ROCKSSSSSSSSSSSSSSS
he is just the Bomb....
Althought my car ( blue) is in USA It says PUERTO RICO all over it. RGONZA ROCKSSSSSSSSSSSSSSS
he is just the Bomb....
Last edited by angeljoelv; 09-30-2007 at 10:03 PM.
10-02-2007, 06:17 PM
#1117
Registered User
Join Date: Sep 2007
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
looking good
i will soon do this setup
hey rx8 think i can link u to do a setup like yours for me
and do they have any 2007 - 2008 in puerto rico
i will soon do this setup
hey rx8 think i can link u to do a setup like yours for me
and do they have any 2007 - 2008 in puerto rico
Last edited by frass_2k4; 10-02-2007 at 07:16 PM.
10-14-2007, 04:21 PM
#1121
.In the "RX-8 Multimedia/Photo Gallerie" section of this forum there is a thread called "surgery has begun" that documents every step of the way from the "reni" to the 20B. You can also search for it.
Chris
Last edited by ChrisRX8PR; 10-14-2007 at 04:23 PM.
10-14-2007, 07:49 PM
#1123
RotoRocks Powered
The blue beast couple of posts above is from SFL.
Angel, I moved to Coral Springs recetly, you should be real close now. Let's get together man, I'll buy the beer, you provide the kick *** tire smoking transportation
Angel, I moved to Coral Springs recetly, you should be real close now. Let's get together man, I'll buy the beer, you provide the kick *** tire smoking transportation
10-15-2007, 08:14 AM
#1124
He didnt bring the car to Puerto Rico. He built it in his kitchen cabinet shop in florida. If you ask me this was some pretty impressive stuff he acomplished in his shop. The cabinets look really good too .
In the "RX-8 Multimedia/Photo Gallerie" section of this forum there is a thread called "surgery has begun" that documents every step of the way from the "reni" to the 20B. You can also search for it.
Chris
.In the "RX-8 Multimedia/Photo Gallerie" section of this forum there is a thread called "surgery has begun" that documents every step of the way from the "reni" to the 20B. You can also search for it.
Chris
10-20-2007, 01:06 PM
#1125
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
the new supercompacto magazine is already realesed.
on the cover rgonza's 3 rotor, 704 hp RX8.
the chick is hot, I saw here in person and is more beautiful.
cheers,
Manuel
on the cover rgonza's 3 rotor, 704 hp RX8.
the chick is hot, I saw here in person and is more beautiful.
cheers,
Manuel
Last edited by RX8PR; 10-24-2007 at 02:42 PM.