3 Rotor RX8 PR
#1151
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Jedi,
that is one of the reason that I asked for help here.
probably someone can give me information on a good replica
that fits good.
the original mazdaspeed is 3 times more expensive, is on $612.50 on rosenthal
but if I can find it at a better price I can buy the original.
thanks for the help!
Manuel
Manuel
that is one of the reason that I asked for help here.
probably someone can give me information on a good replica
that fits good.
the original mazdaspeed is 3 times more expensive, is on $612.50 on rosenthal
but if I can find it at a better price I can buy the original.
thanks for the help!
Manuel
Manuel
#1153
RGonza is All of my reasons to get a 20B. I personally saw that gray monster of his and let me tell you guys........... Its crazy.... plus he is a hell of a guy...
Saludos a Gonza y espero que el avion, que diga el R8 corra los 9...
Saludos a Gonza y espero que el avion, que diga el R8 corra los 9...
#1155
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Hope you start enjoy your car very soon!!
Regards
Rgonza
Last edited by rgonza; 11-30-2007 at 07:14 PM.
#1156
rgonza,
a small technical thing i need to know from u is. how do u go about the Throttle body?
RX8 is using throttle to control the traction control, 20b is using cable rather than electronics.
a small technical thing i need to know from u is. how do u go about the Throttle body?
RX8 is using throttle to control the traction control, 20b is using cable rather than electronics.
#1157
Rob gonzalez
Thread Starter
Join Date: Dec 2005
Location: Naranjito, Puerto Rico
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
my is not using a factory throttle body (DBW), it using a throttle from wilson manifold for ford mustang 110 mm. the traction control algolimth is controlled a stand alone plc and it send an 5vdc signal to haltech ecu to retard the ignition curve.
#1159
can u teach me more about the traction control? i am not sure how this been done. what is the stand alone plc? and how to send an 5vdc signal to haltech?
Last edited by theboy; 12-05-2007 at 03:04 AM.
#1160
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
I'm back in Puerto Rico after my vacations in Oahu, Hawaii and
Huntington Beach, CA it was really good but now is time to continue working.
I saw more RX8's in Oahu than in Los Angeles, California !
not to many rotor heads in California?
I have plans to visit Huntington again for the US open of Surfing
that is from July 24 to 27, 2008 On my next visit I would like to meet some rotor heads on the Huntington area......................................
Merry Christmas to everyone............
Manuel
Huntington Beach, CA it was really good but now is time to continue working.
I saw more RX8's in Oahu than in Los Angeles, California !
not to many rotor heads in California?
I have plans to visit Huntington again for the US open of Surfing
that is from July 24 to 27, 2008 On my next visit I would like to meet some rotor heads on the Huntington area......................................
Merry Christmas to everyone............
Manuel
#1162
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
lets make some noise:
"Uncork your engine's performance with Quick Time exhaust cutouts.
With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street, and wide open for the strip. These electrically controlled exhaust valves bolt to standard cutouts, and can be opened and closed from inside the car with the flip of a switch. Using the convenient interior-mounted switch, you can go from stealth quiet to wide-open power. You control the volume, and you control the flow. Quick Time exhaust cutouts fit any car or truck, from old-school musclecars to high-tech imports."
Manuel
"Uncork your engine's performance with Quick Time exhaust cutouts.
With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street, and wide open for the strip. These electrically controlled exhaust valves bolt to standard cutouts, and can be opened and closed from inside the car with the flip of a switch. Using the convenient interior-mounted switch, you can go from stealth quiet to wide-open power. You control the volume, and you control the flow. Quick Time exhaust cutouts fit any car or truck, from old-school musclecars to high-tech imports."
Manuel
#1164
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
I'm back in Puerto Rico after my vacations in Oahu, Hawaii and
Huntington Beach, CA it was really good but now is time to continue working.
I saw more RX8's in Oahu than in Los Angeles, California !
not to many rotor heads in California?
I have plans to visit Huntington again for the US open of Surfing
that is from July 24 to 27, 2008 On my next visit I would like to meet some rotor heads on the Huntington area......................................
Merry Christmas to everyone............
Manuel
Huntington Beach, CA it was really good but now is time to continue working.
I saw more RX8's in Oahu than in Los Angeles, California !
not to many rotor heads in California?
I have plans to visit Huntington again for the US open of Surfing
that is from July 24 to 27, 2008 On my next visit I would like to meet some rotor heads on the Huntington area......................................
Merry Christmas to everyone............
Manuel
#1165
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Charles,
Joel already buy them?
slavearm,
I have plans to visit CA again in 2008,
my idea is to goes between last week of May and the first week of June, My kids wants to visit disneyland this summer they already visit the disney in Florida and I offer them to goes to the disney in CA, the reason is that I want to visit all the surf shops in the Huntington area or near that area to buy some surfboards. That is my real passion, surfing. I really like T. Patterson surfboards his shop is in San Clemente.
So next time I would PM you!
Manuel
Joel already buy them?
slavearm,
I have plans to visit CA again in 2008,
my idea is to goes between last week of May and the first week of June, My kids wants to visit disneyland this summer they already visit the disney in Florida and I offer them to goes to the disney in CA, the reason is that I want to visit all the surf shops in the Huntington area or near that area to buy some surfboards. That is my real passion, surfing. I really like T. Patterson surfboards his shop is in San Clemente.
So next time I would PM you!
Manuel
#1166
Boost Junkie
Join Date: Nov 2003
Location: Orange County, CA
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Charles,
Joel already buy them?
slavearm,
I have plans to visit CA again in 2008,
my idea is to goes between last week of May and the first week of June, My kids wants to visit disneyland this summer they already visit the disney in Florida and I offer them to goes to the disney in CA, the reason is that I want to visit all the surf shops in the Huntington area or near that area to buy some surfboards. That is my real passion, surfing. I really like T. Patterson surfboards his shop is in San Clemente.
So next time I would PM you!
Manuel
Joel already buy them?
slavearm,
I have plans to visit CA again in 2008,
my idea is to goes between last week of May and the first week of June, My kids wants to visit disneyland this summer they already visit the disney in Florida and I offer them to goes to the disney in CA, the reason is that I want to visit all the surf shops in the Huntington area or near that area to buy some surfboards. That is my real passion, surfing. I really like T. Patterson surfboards his shop is in San Clemente.
So next time I would PM you!
Manuel
#1167
Manuel, I am having the axles black-oxided and they should be done well in-time for Joel's Febraury race schedule. It'll be a couple days before they are done and boxed up. The kits are all done aside from the oxidation protection.
#1168
Manuel, van a ir al Rotary Road Trip a finales de enero? Pienso ir a ver si nos encontramos!
Manuel, are you going to the Rotary Road Trip at the end of January? I'm planning to go maybe we can meet!
Manuel, are you going to the Rotary Road Trip at the end of January? I'm planning to go maybe we can meet!
#1171
Registered User
Join Date: Feb 2005
Location: Manati, Puerto Rico
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
A few guys asked me for new videos....................
here are two small one's videos:
on the first one you can here (first 2 seconds) when I open the exhaust cutout. We installed the exhaust cutout a week a go..............
The video is just croosing, the car spin the tires near 7,500 rpms, boost is 8 psi only.
http://vids.myspace.com/index.cfm?fu...deoID=27610847
the second video is a little more long ride, you can here the tires spinning but nothing special is crossing and I change gears near 7,500 rpms ....................
http://vids.myspace.com/index.cfm?fu...deoID=27609328
enjoy,
Manuel
here are two small one's videos:
on the first one you can here (first 2 seconds) when I open the exhaust cutout. We installed the exhaust cutout a week a go..............
The video is just croosing, the car spin the tires near 7,500 rpms, boost is 8 psi only.
http://vids.myspace.com/index.cfm?fu...deoID=27610847
the second video is a little more long ride, you can here the tires spinning but nothing special is crossing and I change gears near 7,500 rpms ....................
http://vids.myspace.com/index.cfm?fu...deoID=27609328
enjoy,
Manuel
#1175
well rx8 pr has been on the streets and enjoyed for a LONG time. Sticks has been in the SHOP for Longer..... GUess stick will need to take some actions to have his car back
Last edited by angeljoelv; 02-17-2008 at 11:40 PM.