9 psi, 330whp?
#1
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
mazsport type 1, 9 psi, 330whp?
hi all, i decided to write about my experience toward my car and ppl who helped me to make this happen.
i had greddy turbo, and i called scott to asked his opinnions, and i finally bought all the upgrades from Mazsport from coils, fuel pump, injectors, and upgrade greddy intakes, interceptor-x, but still have the greddy kits. now, i got a good deal for mazsport type 1, i decided to go to that route. o well, the kit was slightly used, i think it was TAJABAHO kit (
), from his car. o well cut the bullshit, my mechanic decided to install the turbo kits. i took it to the KDR, he was surprised how clean the set up was which was done by my mechanic. down to the dyno to tune it, and what happened?
5 psi = 262.58 whp, TQ = 195.41
7 psi = 280.14 whp, TQ = 210.62
9psi = 327.71 whp, TQ = 246.45 (DD)
14 psi = ..............clutch slipped, and KDR stopped because he wanted me to go home with out slipping clutch
16 psi = will not happen in my car because i love it too much, dont want to be BOOM
ppl who help me:
1) my mechanic
, and ppl who live in NJ, he will install your turbo if you want to, but it will be little pricy, but it's worth it.
2)mazsport (he send everything in 3 days, gasket, motor mount, everything else what was missing). honestly, all the stuff i got from mzsport, coils, fuels pump, it took me a month,
sorry guys if you waited too long, i feel for you.
ppl, please, i don't wanna ppl think that i was kissing a**, but this is according my experience, mazsport email me and respond my email (at least 1 day) to help me through the turbo kit installation, and he made sure that i had everything. even if when i had my greddy, he called me to fix my interceptor, to fix the dwell.
3)KDR (DAVE) who tuned my car
4) my NJ PPL, who motivate me toward my turbo installation
it's a family in NJ.
ok guys, i wll post pics of dyno and my car, it's rainning all day here, and my car is dirty, so i will wait until sunday to take pics.
i had greddy turbo, and i called scott to asked his opinnions, and i finally bought all the upgrades from Mazsport from coils, fuel pump, injectors, and upgrade greddy intakes, interceptor-x, but still have the greddy kits. now, i got a good deal for mazsport type 1, i decided to go to that route. o well, the kit was slightly used, i think it was TAJABAHO kit (
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
5 psi = 262.58 whp, TQ = 195.41
7 psi = 280.14 whp, TQ = 210.62
9psi = 327.71 whp, TQ = 246.45 (DD)
14 psi = ..............clutch slipped, and KDR stopped because he wanted me to go home with out slipping clutch
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
16 psi = will not happen in my car because i love it too much, dont want to be BOOM
![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)
ppl who help me:
1) my mechanic
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
2)mazsport (he send everything in 3 days, gasket, motor mount, everything else what was missing). honestly, all the stuff i got from mzsport, coils, fuels pump, it took me a month,
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
ppl, please, i don't wanna ppl think that i was kissing a**, but this is according my experience, mazsport email me and respond my email (at least 1 day) to help me through the turbo kit installation, and he made sure that i had everything. even if when i had my greddy, he called me to fix my interceptor, to fix the dwell.
3)KDR (DAVE) who tuned my car
4) my NJ PPL, who motivate me toward my turbo installation
![Lol2](https://www.rx8club.com/images/smilies/lol2.gif)
ok guys, i wll post pics of dyno and my car, it's rainning all day here, and my car is dirty, so i will wait until sunday to take pics.
Last edited by halimsteven; 11-15-2008 at 09:41 PM.
#3
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
![Icon No2](https://www.rx8club.com/images/smilies/icon_no2.gif)
steven
#17
Administrator
iTrader: (7)
grats on the impressive numbers. Keep an eye on that ignition solution though, few people reported some issues with it on an FI application.
#19
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
steven
#22
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
it spikes, but i lower teh spike from the boost controller. it spikes just 1 psi. did you check the boost controller adn the spring pressure on your wastegate? we couldn't find the spring pressure rate for my wastegate, and i am using AEM boost controller, and set it up 5.00. that's waht we did.
steven
#24
Registered
Thread Starter
Join Date: Jan 2007
Location: NJ
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts