9krpmrx8's Boost Build Thread
#3529
yeah it could be the start of slipping, it will get worse if that is the case.
my car did this with the stock clutch and boost, it was really noticble above 6k rpms
and undeniable if I hit boost on the freeway in 5th gear
I replaced the clutch, with the excedy mazdaspeed version I think, haven't had any issues
my car did this with the stock clutch and boost, it was really noticble above 6k rpms
and undeniable if I hit boost on the freeway in 5th gear
I replaced the clutch, with the excedy mazdaspeed version I think, haven't had any issues
#3533
SARX Legend
Thread Starter
iTrader: (46)
I don't smell anything, it only does it for a split second at max boostage. Other than that is drives great. But I am still getting the scenario where boost only goes to 5psi or so and holds but I as soon as I let off the throttle and go again boost is back to normal. I am pretty sure that is my waste gate actuator but I will have a new one on soon and we shall see.
#3537
SARX Legend
Thread Starter
iTrader: (46)
I got my KMA tray back from Jet Hot. They did excellent work Satin silver on the tray and satin black on the Canton reservoir It's can withstand temps of 1300F. The bolts were just used for mock up, I will get proper hardware for the setup soon.
http://www.flickr.com/photos/9krpmrx8/8886457820/http://www.flickr.com/photos/9krpmrx8/8885828993/http://www.flickr.com/photos/9krpmrx8/8885820507/
http://www.flickr.com/photos/9krpmrx8/8886457820/http://www.flickr.com/photos/9krpmrx8/8885828993/http://www.flickr.com/photos/9krpmrx8/8885820507/
Last edited by 9krpmrx8; 05-29-2013 at 11:05 PM.
#3543
#3550
SARX Legend
Thread Starter
iTrader: (46)
I would say 1/8" maybe.
It may all be for nothing, but we will be doing some tests so we shall see.
Last edited by 9krpmrx8; 05-31-2013 at 02:17 PM.