Axial Flow Supercharger
#4801
Registered User
Join Date: Apr 2003
Location: Manchester, MD
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ricky356
... i bought my 8 in november and the first snow within minutes i realized my truck was the way to go
A stock 8 will have problems in the snow because the "summer only" tires that come with it have a problem in the snow. I bought a set of snow tires along with a set of wheels from TireRack and have no problems in the snow - as long as it's not too deep. This is my 4th winter with my car and I get around OK. It's obviously not as good as my wife's Rav4 but, with snow tires, it's better than the front-wheel drive eclipse that I used to have (it just had all-season radials).
At the time when I bought mine I didn't have alternative transportation and had to drive my car in the snow. Since it sounds like you already have something else to drive, I would just stick with that.
#4802
Registered User
Join Date: Dec 2003
Location: Dallas, tx
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
I am sure this does not belong in this thread but I've got to say something about driving in snow. After moving from TX to NY my first winter was crazy! Summer only tires would not allow me to start rolling and after I finally started I couldn't stop! I passed through red lights etc. So I bought all season sumitomo tires. I will tell you that with the perfect balance of RX8 I am passing SUVs, AWD, FWD and it is a blast to drive in snow!
#4803
Registered
iTrader: (1)
Join Date: May 2003
Location: PA
Posts: 3,754
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrWigggles
Just give me a date baby...
Richard, did you get the impression they had it cracked 7 ways from Sunday?
-Mr. Wigggles
Richard, did you get the impression they had it cracked 7 ways from Sunday?
-Mr. Wigggles
I don't know how accurate Q3 is, I personally think we're closer than that. That being said, we tend to give the guys that get hammered on the phone everyday with "When's this coming, when's that?" artificially long dates so we can beat expectations. I hate having them get those "But you said it'd be ready LAST WEEK!" phone calls. Patience is certainly something us Americans have no time for.
Right now we need resources. Reflashing and tuning the ECU is pretty much done on our end. We just need to finish the CAN cable for the Mazdas, and get more software written for the AccessPORT and tuning software. Its for those reasons we don't have a product out today. We could do bench flashes for any RX-8 (USDM AT/MT or otherwise) today. No problems. But putting together all that into an easily digestable handheld product that's still being developed for the Mazda takes a little more time.
#4805
04 and still lovin it
Join Date: Jun 2004
Location: Toronto
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Try here
http://www.cobbforums.com/forums/sho...=31354&page=15
http://www.cobbforums.com/forums/sho...=31354&page=15
Originally Posted by Japan8
r0tor... where did you get that comment from Trey?
#4811
Originally Posted by paulmasoner
the longer i help make this thread, the fewer hundreds of time i can read it all before this thing is done ![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)
![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)
anyways
![Worship](https://www.rx8club.com/images/smilies/worship.gif)
#4812
Drive Master
Join Date: Nov 2003
Location: Redmond
Posts: 1,670
Likes: 0
Received 0 Likes
on
0 Posts
Actually, it makes perfect sense. By increasing the length of the thread, he is increasing the amount of time required to read through it completely. Since it now takes longer to read through the entire thread, there is now less time available to read through it again.
Now, why anyone who's already read through it would want to start from the beginning is another question all together, and that does make no sense.
Patiently awaiting FI.
Now, why anyone who's already read through it would want to start from the beginning is another question all together, and that does make no sense.
Patiently awaiting FI.
#4813
Damn. Looks like we've been beaten boys. The Pettit racing thread seems to indicate Cam's SC will be ready for ordering any week now as their casings are in stock.
Now I'm not saying that this is as signifcant as say, the Russians beating the US into space, but it's pretty up there.
I am taking a trip to Florida next week, and since I have visited Pettit Racing in the past, and gotten a ride in one of there charge'd 8's, I can easly pose as an interested customer, and sabbotage their opperation. I can' t gauarantee more than a few weeks setback time for their team, but it might just be enough to let Richard get his product to market first.
Damn this is close. Perhaps that's why I appear to have gone insane due to lack of HP.
Now I'm not saying that this is as signifcant as say, the Russians beating the US into space, but it's pretty up there.
I am taking a trip to Florida next week, and since I have visited Pettit Racing in the past, and gotten a ride in one of there charge'd 8's, I can easly pose as an interested customer, and sabbotage their opperation. I can' t gauarantee more than a few weeks setback time for their team, but it might just be enough to let Richard get his product to market first.
Damn this is close. Perhaps that's why I appear to have gone insane due to lack of HP.
Last edited by emailists; 03-09-2007 at 03:52 AM.
#4814
Asshole for hire
iTrader: (1)
Join Date: Jun 2006
Location: Colfontaine, Belgium
Posts: 3,214
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by kristopher_d
Actually, it makes perfect sense. By increasing the length of the thread, he is increasing the amount of time required to read through it completely. Since it now takes longer to read through the entire thread, there is now less time available to read through it again.
Now, why anyone who's already read through it would want to start from the beginning is another question all together, and that does make no sense.
Patiently awaiting FI.
Now, why anyone who's already read through it would want to start from the beginning is another question all together, and that does make no sense.
Patiently awaiting FI.
i'm glad you see my logic there... i re-read the entire thread on occasion out of sheer boredom, and lack of abiliy to retain some of the principles of this stuff for more than about 48 hrs or so. if i didnt re-read or at least skim throuhg on occasion i would be
![Wconfused](https://www.rx8club.com/images/smilies/Wconfused.gif)
#4815
Registered
Join Date: May 2006
Location: Charlotte, NC
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by paulmasoner
i'm glad you see my logic there... i re-read the entire thread on occasion out of sheer boredom, and lack of abiliy to retain some of the principles of this stuff for more than about 48 hrs or so. if i didnt re-read or at least skim throuhg on occasion i would be
all the time
![Wconfused](https://www.rx8club.com/images/smilies/Wconfused.gif)
#4817
Administrator
iTrader: (7)
Pettit's SC will most likely be on the market first since last we heard from Richard, he's still working on the tuning (aka flash) for the AFSC.
Being first does not always mean being the best. ie; Russians getting to space, and the ever so famous Greddy Turbo.
Being first does not always mean being the best. ie; Russians getting to space, and the ever so famous Greddy Turbo.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#4818
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jedi54
Pettit's SC will most likely be on the market first since last we heard from Richard, he's still working on the tuning (aka flash) for the AFSC.
Being first does not always mean being the best. ie; Russians getting to space, and the ever so famous Greddy Turbo.![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Being first does not always mean being the best. ie; Russians getting to space, and the ever so famous Greddy Turbo.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#4820
Administrator
iTrader: (7)
Originally Posted by Red Devil
I give Pettit way more credit than Greddy. I don't even consider the two to be in the same category.
Do you guys have any clue what thread you're yammering on in?
I've seen the AFSC in person, seen Richard driving it, I believe in the product, and when it comes out I think there will be plenty of satisfied customers who will be happy that they waited.
Now....back to our regularly scheduled program.
#4823
Originally Posted by rotarygod
"About" is a relative term. In the geologic timescale, humans have only been around for a few minutes!
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#4824
Registered User
Join Date: Nov 2006
Location: Orleans, MA/ JC, NJ
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Ive only read a few pages back (dont feel like reading what I missed) so I was just wondering where RP is at the moment. It seems that hes doing alpha testing if I am correct?
#4825
Boosted Kiwi
iTrader: (2)
Originally Posted by dtorre
The geologic timescale is based off of relative time instead of absolute time. Therefore in the geologic timescale we haven't been around for a few minutes...since thats a measurement of absolute time in relation to a relative subject. Humans in geologic time have been around for merely one or two grand canyon dyke formations....there ya go ![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)