BOV Swap without rewelding?
#1
Booost.
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: Markham/Richmond Hill/Toronto
Posts: 1,099
Likes: 0
Received 1 Like
on
1 Post
BOV Swap without rewelding?
I am currently using a Greddy Type RS BOV, and I was wondering if I could switch to the HKS SSQV without having to weld on a new flange?
#3
Booost.
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: Markham/Richmond Hill/Toronto
Posts: 1,099
Likes: 0
Received 1 Like
on
1 Post
but you couldnt use the HKS right?
I have had no luck finding anywhere a adapter for the HKS which lead me to think that they were compatible...
but from pictures it didn't look like it..
can anyone help me out, I wouldn't mind having to buy a adapter even, if only I know where I can get one.
I have had no luck finding anywhere a adapter for the HKS which lead me to think that they were compatible...
but from pictures it didn't look like it..
can anyone help me out, I wouldn't mind having to buy a adapter even, if only I know where I can get one.
#4
Nope
iTrader: (9)
try www.atpturbo.com They have a bunch of adapters.
The GReddy flange is pretty much the universal flange, so I bet there is an HKS flange adapter for it.
If not, it shouldn't cost more than $50 bucks for a good shop to TIG it.
The GReddy flange is pretty much the universal flange, so I bet there is an HKS flange adapter for it.
If not, it shouldn't cost more than $50 bucks for a good shop to TIG it.
#5
Registered
iTrader: (1)
I recently switched from GReddy Type S to a Synapse Synchronic (non-diaphragm, uses a piston <--hehe)
I am pretty impressed at this BOV, I highly recommend it, no surge at all and very smooth transition between gears.
Synapse Engineering <-- pick from PRODUCTS the Synchronic BOV then the SB001, I bought mine from eBay, it came with a GReddy adapter (which I used), the weld on adapter, a TIAL 50mm and a VW adapter. It also came with a MAF anti-stall adapter.
I am pretty impressed at this BOV, I highly recommend it, no surge at all and very smooth transition between gears.
Synapse Engineering <-- pick from PRODUCTS the Synchronic BOV then the SB001, I bought mine from eBay, it came with a GReddy adapter (which I used), the weld on adapter, a TIAL 50mm and a VW adapter. It also came with a MAF anti-stall adapter.
#8
Finally Boosted!!!!!!!
There currently isn't an adapter to go from the Greddy BOV to an HKS SSQV. You could possibly modify a Mazdaspeed 3, 6, or CX7 adapter flange to work tho. Just depends how handy you are...
Thread
Thread Starter
Forum
Replies
Last Post