Dudelogger internet racing challenge
#26
#31
uhhh-- i dont have a strip of road that i feel comfortable doing that.
I have a flat long interstate entry in which i can get from 30-100 ok on--i have to shift--3nd to 4th? Can that be used?
Right now replacing power window motor and regulator in my sons Mini Cooper S--1st time doing this and it is a head banger.
Fun later today or even tomorrow
OD
I have a flat long interstate entry in which i can get from 30-100 ok on--i have to shift--3nd to 4th? Can that be used?
Right now replacing power window motor and regulator in my sons Mini Cooper S--1st time doing this and it is a head banger.
Fun later today or even tomorrow
OD
#33
Ok guys I dont know how to do a screen shot transferred from my dude so here are some numbers---you can believe them or not:
30.4 mph
2748 rpm
@307.0 sec
80.1 mph
7172 rpm
313.0 sec
maf max of 338.5
load 181
I am on oem size tires
Lets see you finds the something "different".
It was a 3nd gear run---all I had room for--pretty congested around here on Sundays.
OD
30.4 mph
2748 rpm
@307.0 sec
80.1 mph
7172 rpm
313.0 sec
maf max of 338.5
load 181
I am on oem size tires
Lets see you finds the something "different".
It was a 3nd gear run---all I had room for--pretty congested around here on Sundays.
OD
#34
Ok guys I dont know how to do a screen shot transferred from my dude so here are some numbers---you can believe them or not:
30.4 mph
2748 rpm
@307.0 sec
80.1 mph
7172 rpm
313.0 sec
maf max of 338.5
load 181
I am on oem size tires
Lets see you finds the something "different".
It was a 3nd gear run---all I had room for--pretty congested around here on Sundays.
OD
30.4 mph
2748 rpm
@307.0 sec
80.1 mph
7172 rpm
313.0 sec
maf max of 338.5
load 181
I am on oem size tires
Lets see you finds the something "different".
It was a 3nd gear run---all I had room for--pretty congested around here on Sundays.
OD
I want a 4.10 or a 3.9 ratio.
#37
here are the results of my 3rd gear run 30-80 mph (no boost controller 8 psi dropping to 6.5 psi) i was getting some bogging under load..i have too large of a water meth nozzle, need to downsize and work on my mixture
30.45 mph
2911 rpm
2.09 time
80.78 mph
76.86 rpm
7.82 sec
**5.73**
im running 19x9.5 wheels and 265/30 tires
(the next chance i get ill turn on the boost controller and run the log again)
30.45 mph
2911 rpm
2.09 time
80.78 mph
76.86 rpm
7.82 sec
**5.73**
im running 19x9.5 wheels and 265/30 tires
(the next chance i get ill turn on the boost controller and run the log again)
Last edited by gregs; 10-03-2010 at 10:06 PM.
#38
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,601
Likes: 1,534
From: Y-cat-o NZ
OD your gearing in 3rd (with the S2 g/box) must be very close to mine
This is an old log :
2636 rpm
29.1mph
413.2 s
7100 rpm
79.4mph
419s
So **5.8s**
can't remember tyre size for that run - probably 245/40/18
This is an old log :
2636 rpm
29.1mph
413.2 s
7100 rpm
79.4mph
419s
So **5.8s**
can't remember tyre size for that run - probably 245/40/18
Last edited by Brettus; 10-04-2010 at 01:53 AM.
#40
don't forget to adjust speeds for diferring tyres and wheel sizes! Your speedo on OBD II is assuming its running on 18s with 225/45s..
I should dig my logger out and do this at some point!
I should dig my logger out and do this at some point!
#42
#43
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,601
Likes: 1,534
From: Y-cat-o NZ
My old log says
3603rpm
40.3mph
156.0s
8072rpm
90.0mph
162.2s
So **6.2s** 40-90
If you can beat that I'll go out and have another go ....
Last edited by Brettus; 10-04-2010 at 03:16 PM.
#44
S2 box is the right answer --ding, ding, ding!!!
So I am geared a little taller than the cars with the s1 box--hince the lower rpm.
I have oem tire size
For those that do not know--i have the Pettit system with approx 9lbs of boost.
w/m also--not tuned for w/m ----only insurance purposess .
Now guys remember there are too many variables to really compare car--to car---but it IS fun.
OD
So I am geared a little taller than the cars with the s1 box--hince the lower rpm.
I have oem tire size
For those that do not know--i have the Pettit system with approx 9lbs of boost.
w/m also--not tuned for w/m ----only insurance purposess .
Now guys remember there are too many variables to really compare car--to car---but it IS fun.
OD
#46
he, he. I wish i could figue out how to get the image up? I right clicked the screen when the dude file is up and got nothing. Tell me how and i will try?
Some (not yall) may not think I am as honest as I am
OD
Some (not yall) may not think I am as honest as I am
OD
#47
Thread Starter
Boosted Kiwi
iTrader: (2)
Joined: Apr 2006
Posts: 20,601
Likes: 1,534
From: Y-cat-o NZ
/\ easiest way :
With the image on sceen click the 'print screen' button on your keyboard
Go into MS paint and click edit then paste
Then click 'file' then 'save as'
In the top box save to 'desktop'
At bottom of box give file a name
Change file type to Jpeg
Click 'SAVE'
Now you have the image on your desktop and can import it into your post via the 'go advanced' button .
If you wanted it to be full sized you then save it into your photobucket account and inport it from there
Good luck
With the image on sceen click the 'print screen' button on your keyboard
Go into MS paint and click edit then paste
Then click 'file' then 'save as'
In the top box save to 'desktop'
At bottom of box give file a name
Change file type to Jpeg
Click 'SAVE'
Now you have the image on your desktop and can import it into your post via the 'go advanced' button .
If you wanted it to be full sized you then save it into your photobucket account and inport it from there
Good luck
#48
#50
Thanks for the advice guys--if I have time I will try that tonight. The wife is making me go out and buy a new suit. My youngest Daughter is in the homecoming court and wants me to walk her out. Kinda proud moment, i need to enjoy that--time flies by so damn fast.
OD
OD