Esmeril Racing Apex Seals on an FI'd renesis - post your experience good or bad
#77
Registered
My guess, a loud noise, a push against the flat rotor face towards the stationary gear, if the stationary gear has enough wear for the apex to leave (or almost leave) the rotor housing, the apex breaks as the gases rush past the rotor/housing gap.,,,,
Just my guess.
![Scratchhead](https://www.rx8club.com/images/smilies/scratchhead.gif)
#79
Currently at 17000 miles and the major detonation scare I had a few thousand miles back does not appear to have affected performance .
Also : now routinely running at 11-12psi in the lower rpm range .
I do get a feeling that my compression may be down a little due to the occasional hot start difficulty but this has been the case since the engine was rebuilt so I just put it down to using old housings .
Also : now routinely running at 11-12psi in the lower rpm range .
I do get a feeling that my compression may be down a little due to the occasional hot start difficulty but this has been the case since the engine was rebuilt so I just put it down to using old housings .
Last edited by Brettus; 01-21-2011 at 02:12 PM.
#80
Currently at 17000 miles and the major detonation scare I had a few thousand miles back does not appear to have affected performance .
Also : now routinely running at 11-12psi in the lower rpm range .
I do get a feeling that my compression may be down a little due to the occasional hot start difficulty but this has been the case since the engine was rebuilt so I just put it down to using old housings .
Also : now routinely running at 11-12psi in the lower rpm range .
I do get a feeling that my compression may be down a little due to the occasional hot start difficulty but this has been the case since the engine was rebuilt so I just put it down to using old housings .
Does your car has the most current starter? This might help with issue you have with hot start.
I parked my car for the winter so no mileage for the last 3 months....Currently I have about say 13000 miles or so on the rebuilt engine (esmeril seals) and on the 2nd turbo (precision 6265. The old one was the no name turbo that lasted almost 10K miles). And I do need a new starter. Mine crank real slows and take a long long crank to start the engine.
#85
this space for rent
iTrader: (1)
Join Date: Jan 2003
Location: Indy
Posts: 1,179
Likes: 0
Received 0 Likes
on
0 Posts
Any new info on how these are working? Anymore hot start issues?
Im needing a rebuild, staying NA, would like some NRS ceramic, but really cant afford them, thus looking into Esmeril.
#86
With new starter I don't have long start anymore. It starts almost immediately everytime. No more embrassment at gas station where I routeenly had to pop up the hood to pull fuse and restart engine. I tried start the engine back to back to back 5 times last night and it starts up on first tried every time. Life might be easier for you if you replace your old starter with a new one and it may eliminate the hot start issue that you have.
#91
Bat Mobile Driver
o ok hows your air\fuel looking crusing and on full boost.
#93
Bat Mobile Driver
The following users liked this post:
rob babicki (06-17-2021)
#99
A "single" event sounds like a firecracker and will usually produce at halting "snap" that you can feel through the chassis. It will sound like it is coming from the floor above your knees.
A "multiple" event will sound like someone is crushing an empty soda can in the same location.
A "multiple" event will sound like someone is crushing an empty soda can in the same location.
Not sure we can compare the esmeral seals to stock just by saying the engine still runs after detonation.
#100
Engine teardown with Esmeril apex seals at 60,000 kms.......
https://www.rx8club.com/major-horsep...1/#post4438190
https://www.rx8club.com/major-horsep...1/#post4438190