what vid?
|
Originally Posted by BillyPilgrim
(Post 2072260)
Whoa, whoa, whoa.... What vid? Please post vid or link to vid for the rest of us.:)
They are there, you just need to go back a while to find them. But here they are again: www.hymee.com/rx8/videos/pda_blown_rx8.wmv www.hymee.com/rx8/videos/PDA_SC_RX8_13PSI.wmv http://www.hymee.com/rx8/videos/PDA_...Dyno_Wheel.wmv http://www.hymee.com/rx8/videos/PDA_...noSessions.wmv http://www.hymee.com/rx8/videos/PDA_...rstRunning.wmv http://www.hymee.com/rx8/videos/PDA_...1stRunning.wmv http://www.hymee.com/rx8/videos/PDA_..._RedHotCat.wmv http://www.hymee.com/rx8/videos/PDA_...d_FirstRun.wmv Cheers, Hymee. |
Hi Mark,
Are you back home now? Fabrice |
hello Fabrice! how are you? good to see you
|
Hi Zoom, I'm fine, thanks. I haven't been around much lately. I'm already spending too much time on the UK and French forums.
Cheers, Fabrice |
Originally Posted by Rasputin
(Post 2073210)
Hi Mark,
Are you back home now? Fabrice Cheers, Hymee. |
Well all - work continues. Today I ordered the air-to-air intercooler, or aftercooler if you like. Using the best Aussie stuff again - PWR.
Plan at this stage it to get it all running on the engine dyno with a large throttle body and all the gear. No date set for this yet, but probably within the next 2 weeks. Yes - engine dyno. Anyway - rxeighter just got here with Mrs rx8eighter to go out for dinner. Cheers, Hymee. |
Yes, got you re-mails. Replied.
Hope you had a succesful trip and confortable flights. Cheers, Fabrice |
Originally Posted by Hymee
(Post 2073195)
The vids I posted of Prototype #1 and Prototype #2...
They are there, you just need to go back a while to find them. But here they are again: www.hymee.com/rx8/videos/pda_blown_rx8.wmv www.hymee.com/rx8/videos/PDA_SC_RX8_13PSI.wmv http://www.hymee.com/rx8/videos/PDA_...Dyno_Wheel.wmv http://www.hymee.com/rx8/videos/PDA_...noSessions.wmv http://www.hymee.com/rx8/videos/PDA_...rstRunning.wmv http://www.hymee.com/rx8/videos/PDA_...1stRunning.wmv http://www.hymee.com/rx8/videos/PDA_..._RedHotCat.wmv http://www.hymee.com/rx8/videos/PDA_...d_FirstRun.wmv Cheers, Hymee. |
Hymee,
What displacement charger are you using now? I haven't seen that mentioned since you've been back. |
what engine management are you using for the kit? is it still motec?
|
Originally Posted by lookingglass
(Post 2076291)
Hymee,
What displacement charger are you using now? I haven't seen that mentioned since you've been back. Cheers, Hymee. |
Originally Posted by rotarenvy
(Post 2076695)
what engine management are you using for the kit? is it still motec?
I'd recommend MoTeC, Powermod and Hymee Reflash. Not in any particular order. The last one is still in development, but has been prototyped. Cheers, Hymee. |
Hymee reflash and Prototyped... Go ahead on with your bad self.... Keep working Hymee.....
|
Wow I am "too new" to have seen those videos, that car is SICK (in a good way!)
Exhaust sounds sweet, too. But nothing like a "whiny biotch" of a car! |
Hah, yeah I always thought it kinda sounded like an ambulance. Maybe that will make people get out of your way. ;)
|
^ that is actually not a bad idea at all
|
Hymee, when and how can we see the Hymee Reflash implemented? At Sevenstock I heard you mention that you're anticipating the end user being able to tune with the sCANalyser, is this true? And if I were to buy a sCANalyser now, would you support the current version with an update when and if the new software is released?
|
Reflash from down under, heh?
Sounds interesting mite... I'll be keeping me eye on that one. :) |
2 Attachment(s)
Originally Posted by rotorocks
(Post 2092818)
Reflash from down under, heh?
Sounds interesting mite... I'll be keeping me eye on that one. :) Yep - Hard at it as we speak. But I just decided to take a short break and go fit up my intercooler now I have the brackets. I can't believe I have waited since the 22nd Feb for someone to bend these up for me, only to have fabricated them myself this morning... https://www.rx8club.com/attachment.p...1&d=1206084583 https://www.rx8club.com/attachment.p...1&d=1206084583 Check out my forum for other updates on progress: http://forum.hymee.com Cheers, Hymee. |
Originally Posted by Hymee
Hymee, since you are getting close. Is there anything you think people should be preparing to do or should be aware of. For example, there are a long list of aftermarket modifications: 1. Air intake ducts. Like Racing Beat or Odula. Will those be OK? 2. AEM or Mazdaspeed CAI. OK? 3. Greddy oil pan. 4. Mazmart water pump. 5. Mazsport ignition upgrade? 6. Mazsport engine mounts. Any thoughts? 7. Headers? 8. Oil. Any thoughts on grade or about the synthetic debate? 9. Any exhaust recommendations? 10. Anything about the different markets? JDM, USDM, Europe, etc.... 11. Thoughts on Automatics, in terms of special considerations. Including say your air to air intercooler and those who have Automatic Transmission Coolers. Obviously a long list. So answer whatever ones you would like to and at your leisure. ( Finishing the SC come first :-) ). |
The obvious first base is a "stage 1" kit where all OEM fuel and ignition is retained. Then it can only go up from there. :)
As for the getting it finished, I was just working on it now. As for the ProTuner, I need to finish off this IC install, and get on with it. Cheers, Hymee.
Originally Posted by sosonic
(Post 2360895)
The "stock" look of your kit with the "covers on" has always been interesting. Including the stock air box.
Hymee, since you are getting close. Is there anything you think people should be preparing to do or should be aware of. For example, there are a long list of aftermarket modifications: 1. Air intake ducts. Like Racing Beat or Odula. Will those be OK? 2. AEM or Mazdaspeed CAI. OK? 3. Greddy oil pan. 4. Mazmart water pump. 5. Mazsport ignition upgrade? 6. Mazsport engine mounts. Any thoughts? 7. Headers? 8. Oil. Any thoughts on grade or about the synthetic debate? 9. Any exhaust recommendations? 10. Anything about the different markets? JDM, USDM, Europe, etc.... 11. Thoughts on Automatics, in terms of special considerations. Including say your air to air intercooler and those who have Automatic Transmission Coolers. Obviously a long list. So answer whatever ones you would like to and at your leisure. ( Finishing the SC come first :-) ). |
1 Attachment(s)
Here is a quick pic of the bracketry for the IC in place.
https://www.rx8club.com/attachment.p...1&d=1206092566 Cheers, Hymee. PS - Is it just me, or has the site been s-l-o-o-o-o-w lately? |
2 Attachment(s)
90% Fully Sik...
https://www.rx8club.com/attachment.p...1&d=1206096689 https://www.rx8club.com/attachment.p...1&d=1206096689 'cuse the pilot holes. A little too far back, now a smidge too far forward. Also, the top mounting plate need to be beefed up slightly. 3mm is just a little thin for that cantilever on the PAX side. (My pax, that is ;) ) Need to look at that PCM cooler tube. Don't want to do anything obvious and bugger things up for Warren. Cheers, Hymee. |
Originally Posted by Hymee
(Post 2360941)
Also, the top mounting plate need to be beefed up slightly. 3mm is just a little thin for that cantilever on the PAX side.
Cheers, Hymee. 5000 Posts and I didn't even realise :). In my own thread too. Aww, shucks. |
All times are GMT -5. The time now is 10:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands