Mazsport Ignition Solution!
#1176
He's as bad as Can
'MS' refers to MazSport. The Harness I mentioned is the one on the left in THIS photo. The photo contains everything in the kit, is that what you have?
Other things to check.
The fuse in the harness
The grounds MUST be made to clean spots
The connection to the + power source
Other things to check.
The fuse in the harness
The grounds MUST be made to clean spots
The connection to the + power source
Last edited by expo1; 06-14-2008 at 10:02 PM.
#1178
Registered
Oops, I've seen Mazdaspeed referred as MS before, and by the photo, that's what I assumed you meant. The connectors match exactly as described. With the ignition at 'ON' the led is off so I'm guessing the fuse is good. It looks fine visually. I cleaned the grounds with some isopropanol prior to connecting them.
Last edited by sappari; 06-14-2008 at 10:18 PM.
#1179
Piston-free 07.11.2007
Join Date: Apr 2005
Location: Madison, WI
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Check the plugs that go into the ignitor (the black box mounted to the galvanized motor bracket). That's what I messed up.
In other news I've noticed that my tailpipes are cleaner than usual. I clean them periodically with Nevrdull and normally the bottom of the exhaust pipes are black within 2-3 days. I installed the Ignition Solution on Wednesday and four days later my exhaust is barely showing signs of carbon.
I really wish I had my AccessPORT to see what's changing!
In other news I've noticed that my tailpipes are cleaner than usual. I clean them periodically with Nevrdull and normally the bottom of the exhaust pipes are black within 2-3 days. I installed the Ignition Solution on Wednesday and four days later my exhaust is barely showing signs of carbon.
I really wish I had my AccessPORT to see what's changing!
Last edited by RWagz; 06-15-2008 at 11:35 AM.
#1180
pbuck1
Join Date: Aug 2004
Location: Cottage Grove ,WI
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Ok , I've read back in the post and I to have the pop when you try to start the car . I have checked and cleaned all the grounds and I now that I'm getting gas . And other things that I should be looking for ?
#1184
2 questions. Is there still a wait time from when you order this, and when it arrives? In the previous posts it appears people ordered and paid, it they waited a long time before getting it?
Also is the a DIY thread on this product yet? I couldnt find it.
Also is the a DIY thread on this product yet? I couldnt find it.
#1185
Piston-free 07.11.2007
Join Date: Apr 2005
Location: Madison, WI
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
1. They have them instock now. Order and it ships out next business day or so.
2. No DYI needed. It comes with an excellent illustrated instruction booklet and all you need is a 8mm & 10mm wrench, 8mm and 10mm socket with about a 12" extension. That's it.
The last few pages of this thread have made it seem like it's hard to install or something...it's NOT. If you know how to screw and unscrew bolts and can follow simple instructions you're set.
2. No DYI needed. It comes with an excellent illustrated instruction booklet and all you need is a 8mm & 10mm wrench, 8mm and 10mm socket with about a 12" extension. That's it.
The last few pages of this thread have made it seem like it's hard to install or something...it's NOT. If you know how to screw and unscrew bolts and can follow simple instructions you're set.
#1186
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Check the plugs that go into the ignitor (the black box mounted to the galvanized motor bracket). That's what I messed up.
In other news I've noticed that my tailpipes are cleaner than usual. I clean them periodically with Nevrdull and normally the bottom of the exhaust pipes are black within 2-3 days. I installed the Ignition Solution on Wednesday and four days later my exhaust is barely showing signs of carbon.
I really wish I had my AccessPORT to see what's changing!
In other news I've noticed that my tailpipes are cleaner than usual. I clean them periodically with Nevrdull and normally the bottom of the exhaust pipes are black within 2-3 days. I installed the Ignition Solution on Wednesday and four days later my exhaust is barely showing signs of carbon.
I really wish I had my AccessPORT to see what's changing!
#1187
1. They have them instock now. Order and it ships out next business day or so.
#1188
Piston-free 07.11.2007
Join Date: Apr 2005
Location: Madison, WI
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, I thought Scott had said they were going to be an instock item now.
#1189
Super-impreza!
iTrader: (-1)
Join Date: Dec 2007
Location: SoCal/NY
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
just a note..
since installing and my PCM adjusting... I've seen consistantly better gas mileage as well when commuting to and from work. I actually got 300 mpg in a tank! With a few scattered redlines to boot! And I'm not using an accessport either haha
since installing and my PCM adjusting... I've seen consistantly better gas mileage as well when commuting to and from work. I actually got 300 mpg in a tank! With a few scattered redlines to boot! And I'm not using an accessport either haha
#1190
bi polar rotor loner
#1195
"MuNcH-E"
Join Date: Apr 2007
Location: Pembroke Pines
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Swoope don't bang your head your speed reading was correct in it's interpretation. he did put 300mpg but was making reference to the tank .
#1197
bi polar rotor loner
#1200
I'll snap his neck.
Scott (and others),
I'm just posting a question for us 4AT bastard stepchildren - has anyone done any reviews, provided any dynos (butt or otherwise), etc of the ignition solution on the 4AT? I brought it up to a new person over in our little corner of the forums who was asking for advice on potential mods.
Thanks!
I'm just posting a question for us 4AT bastard stepchildren - has anyone done any reviews, provided any dynos (butt or otherwise), etc of the ignition solution on the 4AT? I brought it up to a new person over in our little corner of the forums who was asking for advice on potential mods.
Thanks!