Hi,GTAW ,

the turbo is a garrett GT35 40r Dual Ball bearing.

 

Dang how did I missed this thread arggggg. hehehe
How it going Chris ? We should all do launch one weekend.

 

pic s updates

 

Wow

 

Ok this is starting to get on my nerves..I want a reliable turbo or sc for more thatn 350whp NOW!!!Stop teasing us!! :P :D

 

The fuel system mods are a bosch in line 0044 fuel pump with -8 fuel line to fuel rails and aeromotive fuel pressure regulator and aeromotive fuel pump speed controller..

 

Hi, Gtaw

I did remove the stock one (Fuel Pump) instead i fabricate a custom fuel pickup to feed the 044 this pump is the best if you plan to run a turboCharged (Renesis)twins rotors engine. For a Ecu is best to replace the E manage for a stand alone ecu this one is much better and you have full control over fuel and ignition..The Greddy ECU here has a bad reputation of blowing a lot of turbocharged rotary engine ...

 

rgonza you are using Greddy Ultimate correct? modified of course

 

Hi Truemagellen,

Yes ,,, That's why we prefer to run stand alone , once you set your E manage Ultimate with the corrects setting and run the cars for the next 2 weeks the car runs perfecly once past a mounth this one runs randonly erratic and cause a lot of turbocharged rotary engine to failure and in some case blowns the engine. The turbo kit from greddy is nice with the exepction of the E manage ECU that's why a lot of customer blowns their engine with this kit!!!! if you want to runs a reliable turbo with renesis the 1st step is move to stand alone ECU and take full control of fuel and ignition we runs in the island 18 of boost without no detonation problems or apex seals problems..

Regards
Rgonza

 

How much hp are you making at that boost?

 

WHere did you get the manifold and turbo brackets made at. I have a custom turbo on a greddy manifold and I am dying to get it out of that wheel well area.

thanks,

chris

 

Chris, did you ever dyno your set up?

 

truemagellen,

rgonza is using a haltech on the 2 rotor project and on his 3 rotor car

please don't unsult rgonza (he don't like greddy parts! ) is joking!


zoom zoom 8,

the manifold and all the piping are custom, rgonza maked them.


Manuel

 

nice...

Manuel do you know Chris too? fly up to Minnesota some time and we'll all built a monster rx-8

 

so the highest hp the 13b on an rx8 has seen is about 350 then? most likly at the flywheel... cmone market get going.

 

I second that!

Very happy to see this all coming together.

 

Nope.

Respect goes out to Puerto Rico!

 

I agree that the market should get going but I differ from the hp figures. I saw 410 WHP at a dyno shoot on a stock renesis engine with a large single turbo in PR before I came here. I beleive it was Rgonza's Blue car when it had the turbo under the car instead of above the engine. If I'm not mistaken it was running about 18-19psi of boost. I know this figure for a fact because my friend Cheo was competing with an FD and he got about 405hp and lost to the renesis. The horsepower is there and there is way more room to grow.

 

I think that chris is from Puerto Rico.................

if I can see chrisRX8PR probably I recognize him...........................
His friend cheo is from my town, Manati
I know cheo we talk very often.

The blue Rx8 maked 396 hp with a different turbine and different set up,
now is on rgonza hands and we buyed a bigger turbine (GT35/40R) and other upgrades. rgonza know a lot about electronic and knows to set up different ECU's so he would make a great set up for this car.

silverwolf,
here is a picture of my car with a Gt35/40R set up,
with that one the car maked 328 hp at the wheel that is near 400 hp at the flywheel.

Manuel

 

Manuel,
Yo estudie con Cheo en el Colegio de Mayaguez y me pasaba en la casa de el en Ciales/Manati. Conozco bien a galdi y he visto tu carro par de veces. No se si me conoces en persona pero cuando estaba en PR iba mucho al taller de Galdi. Quiza no me conoces pq en ese momento no tenia un rotor, tenia un 3000gtVR4 rojo con una sola turbina(60-1). Ahora estoy en Minnesota, me compre un RX8 y las fotos al principio de este thread son las del kit q estoy fabricando en mi casa por aca. Mi email es christian@c-axis.com si tienes mas fotos de tu carro con el renesis turbo enviamelas si no es problema. Gracias y mucho saludos.

And since I want everyone else to understand
"Manuel,
I went to college with Cheo at Mayaguez and would frequent his house in Ciales/Manati very often. I know Galdi(Psiquiatra) very well and have seen your car a couple of times before. I don't know if you know me in person but when I was in PR I would visit Galdi's shop frecuently. Maybee you dont remember me because at the time I didn't have a rotary, I had a red 3000gtVR4 with a single 60-1 turbo. Now I'm in minnesota, I bought a RX8 and the pics at the beggining this thread are of the turbo assembly I'm fabricating at home. My email is christian@c-axis.com if you have any more pictures of your car with the turbo renensis in it send them my way if it isn't a problem. Thanks and grettings"

Chris....Esmeril

 

Chris,

I born in mayaguez!
my family is from Miradero............................

good look with your project.

Galdy maked cheo's car and in the beginning he maked my RX8 (greddy kit and the
Gt35/40R custom kit)
the 3 rotor swap was maked by rgonza..........................
we would be with our cars at the furious wheels auto show this week (biggest auto show in the caribbean, 30,000 persons/daily from sept 1 - 4.)

I would send you other pics by email.

Manuel

 

Great, Gracias. Me encantaria estar en la isla para el evento pero estoy un poco lejos. I'll be expecting your emails, thanks.

Chris...Esmeril

 

A new service bulletin has come out:

a requirment of this thread is to post pics of Puerto Rican women if you are from there