Pettit Super Charger Owners
#5926
Rotary engine addict
Join Date: Jun 2008
Location: Guadeloupe (FWI)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
I listen to every one here !
You gave too much timeand money to this car ! you can't give up !
if you really want to change something : just found an rx7 TT 2.0 engine
what a feeling ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
(and pettit did some with the banzaï rx7 : 500HP)
You gave too much timeand money to this car ! you can't give up !
if you really want to change something : just found an rx7 TT 2.0 engine
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
(and pettit did some with the banzaï rx7 : 500HP)
#5928
Registered
iTrader: (3)
thanks Guys---the family has surprised me. My biological/marriage family I mean.
My 17 yr old daughter offered to swap me her car (you have to understand--she loves her car--05 acura tsx) for mine after it was fixed and defanged--to keep it in the family. That almost brought a tear to my eye. Damn. Guess more than one person in this house has become attached?
Anyway--i have to fix it 1st before anything.
BUT--WORD OF WARNING--GET THOSE DAMN FUEL LINE CONNECTORS SECURE! Yall do know the FP will spike when you let off the gas too--right?
I also have a builder (great one) that will do me a 2nd gen street version LS 1 with manual trans and a/c etc for 15-20K. Glad I have some time to make my decision.
Thanks for all yalls support and well wishes.
olddragger
My 17 yr old daughter offered to swap me her car (you have to understand--she loves her car--05 acura tsx) for mine after it was fixed and defanged--to keep it in the family. That almost brought a tear to my eye. Damn. Guess more than one person in this house has become attached?
Anyway--i have to fix it 1st before anything.
BUT--WORD OF WARNING--GET THOSE DAMN FUEL LINE CONNECTORS SECURE! Yall do know the FP will spike when you let off the gas too--right?
I also have a builder (great one) that will do me a 2nd gen street version LS 1 with manual trans and a/c etc for 15-20K. Glad I have some time to make my decision.
Thanks for all yalls support and well wishes.
olddragger
#5929
Administrator
iTrader: (7)
Damn OD, sorry to hear about the engine going on you.
Quite a generous offer from your daughter, it's obvious you raised her right.
Build her back up and show that damn car whose boss. You know you want to...
Quite a generous offer from your daughter, it's obvious you raised her right.
Build her back up and show that damn car whose boss. You know you want to...
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#5931
Londons Yellow Peril
yeah i guess (looking on the bright side if possible)
now you have the engine out, you can try some other stuff out, and or tidy things up in the bay.....
Good to hear that BOTH your familys are behind you!
now you have the engine out, you can try some other stuff out, and or tidy things up in the bay.....
Good to hear that BOTH your familys are behind you!
#5932
Registered
iTrader: (3)
true that, true that![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
looks like a Rick engine from Mazmart will be going in. Engine out this w/e and hopefully between daughters school, another daughter's college soccer(scholarship), work etc i can get er done by the w/e after that.X fingers
One hit to all about tracking with the big pulley--i was having trouble with the belt slipping. Even in the higher gears and lower rpm's --may not be enough belt for the road course? With the smaller pulley no problem.
OD
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
looks like a Rick engine from Mazmart will be going in. Engine out this w/e and hopefully between daughters school, another daughter's college soccer(scholarship), work etc i can get er done by the w/e after that.X fingers
One hit to all about tracking with the big pulley--i was having trouble with the belt slipping. Even in the higher gears and lower rpm's --may not be enough belt for the road course? With the smaller pulley no problem.
OD
#5933
You're not the only one to get bitten in the *** by those cheap connectors, Denny. Autopsy has it that they were a major culprit in my car's problem; Cam has told me that his popped off in traffic.
Another thing: I only had the problem after I installed the larger pulley and injectors.
Just like you.
Hmmm.
Cam mentioned he was had a concept for a billet connector to replace those quick connectors, don't know if he's done it yet. But yeah, everyone check those quick connects, wrap a zip tie around the collar - tight - both connectors. Under high pressure conditions with all the extra heat in the engine compartment, those quick connects will become plastic enough to slip over the mushroom connector on the fuel rails and spray raw fuel right on top of the LIM and drip down onto the exhaust manifold. Ask me how I know.
#5934
Registered
iTrader: (3)
you too huh---makes sense--we are having to pump more and more fuel to the beast. we may actually be getting close to the FP capacity?
Anyway i am going to notch mine with a dremel so a small zip tie will fit and not slide around-- or--may be able to drill a couple holes in the ends and use them to secure the dang things.
I am not giving up on the bigger pulley--i always wanted a better way of holding tension on that belt. Maybe I will have time now to figue one out.
Lot of work ahead of me in the dirt, on my back, in the summer heat iof Ga during my 60th birthday. Cant think of a better present---Thank ya Lord!!
olddragger
Anyway i am going to notch mine with a dremel so a small zip tie will fit and not slide around-- or--may be able to drill a couple holes in the ends and use them to secure the dang things.
I am not giving up on the bigger pulley--i always wanted a better way of holding tension on that belt. Maybe I will have time now to figue one out.
Lot of work ahead of me in the dirt, on my back, in the summer heat iof Ga during my 60th birthday. Cant think of a better present---Thank ya Lord!!
olddragger
#5935
hello all i am new to the site/club i have had my rx8 for like 4 months now. love it. but would like to make it just a bit quicker and what not. ive been lookin around and found this one 'super charger' for pretty cheap. was wondering how well it performs or if it is an entire 'supercharger' or not. i am new to all of this. waht i found was this....Pettit Supercharger PCM-FI recal kit from rx7store.com
#5937
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
hello all i am new to the site/club i have had my rx8 for like 4 months now. love it. but would like to make it just a bit quicker and what not. ive been lookin around and found this one 'super charger' for pretty cheap. was wondering how well it performs or if it is an entire 'supercharger' or not. i am new to all of this. waht i found was this....Pettit Supercharger PCM-FI recal kit from rx7store.com
#5941
Registered
I suspect he is talking about the "ring clamp", this is the return line (unused in the Pettit kit) and this ring is blue.
On the real fuel line, that is on all of our cars (N/A, S/C and Turbo) the clamp is red.
Right OD?
Last edited by Rote8; 10-16-2009 at 05:12 PM.
#5943
Caution: Not for the faint of heart
Yep, those are the little bastards. Here's what it can look like when one pops:
#5946
Registered
#5947
Tailgaters beware
Cobb access port - a flash tuning device
Exhaust with high flow cat or no cat if you want to be really loud!
Intake - even just the K&N replacement filter gave me 5 rear wheel hp for $50
Ignition upgrade gives you a very strong power gain of around 10 rear wheel hp
Do some searches and choose which brands you think will be best, you can send me a personal message if you want some details on my experiences.
#5948
Tailgaters beware
You might be able to sell that sc if you scrub it, its almost the only thing recognizable in there. I guess anyone with forced induction should mount a fire extinguisher, that horrible looking sorry for your loss.