Pettit Super Charger Owners
#576
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
#577
Registered
iTrader: (3)
Throw in a beta blocker and an ace inhibitor and I'm yours, all dilated, somewhat sedated, and can eat with the best of them at the waffle house later! Course i may need the viagra for the insuring late onset and refractory pulmonary hypertension () approx 6 hrs later.
oscd
oscd
#578
"MuNcH-E"
Join Date: Apr 2007
Location: Pembroke Pines
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Throw in a beta blocker and an ace inhibitor and I'm yours, all dilated, somewhat sedated, and can eat with the best of them at the waffle house later! Course i may need the viagra for the insuring late onset and refractory pulmonary hypertension () approx 6 hrs later.
oscd
oscd
#582
Dongbag extrordinare
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone else been having an issue with belt slippage above 7lb of boost? I'm thinking we either need a 6/8 rib belt in combo with a belt tensioner. Your thoughts gang??
#583
The rite tension on the blower belt is reached when you can barly twist it 90 degrees. Make sure the 14mm bolt holding the pully is VERY tight and the tensioner is seated correctly. Check all your other belts as well.
#586
Dongbag extrordinare
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
What do you mean in pinch?? I'm currently using a 4 wide belt because that is what came with the kit.
I will check the belts and pulley bolt AGAIN in the next few days and see if the slippage is still occuring.
I will check the belts and pulley bolt AGAIN in the next few days and see if the slippage is still occuring.
#591
Registered
iTrader: (3)
mine seems to be a little loose--must tighten it up. Course i still have less than 500miles on the unit and too tell the truth i havent pushed the car to any degree of seriousness. I want to get her tuned 1st.
Currently working on a redesign for the oil dipstick. Thinking also of "holing" the upper grill area and the bumper reinforcement with 1"x4 holes. I like the look on other cars I have seen --the s-14 chassis and certain Mustangs and it would help airflow--I think.
Also looking for a grill badge kit so a "PETTIT S/C" badge could be made.
You know, I pittle and think too damn much.
OSCD
Currently working on a redesign for the oil dipstick. Thinking also of "holing" the upper grill area and the bumper reinforcement with 1"x4 holes. I like the look on other cars I have seen --the s-14 chassis and certain Mustangs and it would help airflow--I think.
Also looking for a grill badge kit so a "PETTIT S/C" badge could be made.
You know, I pittle and think too damn much.
OSCD
#595
Do you have a place to work on cars like preferably a garage? im game on leaving out of here between the 10th and 15th. Id like you to put about 100 miles or so on it to make sure everything is perfect.
#596
Nice, 1 more left, hopefully out west or off route 10 anyone? 70 between X-mas and newyears and route 10 around 2 or so weeks after newyears.
Last edited by Moon Assad; 11-27-2007 at 07:34 PM.