Pettit Super Charger Owners
#6851
Banned
iTrader: (3)
As this is your first track event, I highly recommend you DO NOT flush or bleed your brakes. If they are working adequately, you do not want to add another failure point by potentially bleeding your brakes incorrectly.
Bleed them after the event. They'll probably need it.
The likelihood that you will use your brakes at a level that might introduce failure is extremely low.
R1Rs DO NOT like low pressures. Start at 30 PSI all the way around and put a dab of shoe polish on the sidewalls right where it meets the tread. Since you are only doing 5 or less laps per session, you will NOT get up to operating temp on those tires, so you just want to see how much squirm you've got going on and the polish will show that.
Bleed them after the event. They'll probably need it.
The likelihood that you will use your brakes at a level that might introduce failure is extremely low.
R1Rs DO NOT like low pressures. Start at 30 PSI all the way around and put a dab of shoe polish on the sidewalls right where it meets the tread. Since you are only doing 5 or less laps per session, you will NOT get up to operating temp on those tires, so you just want to see how much squirm you've got going on and the polish will show that.
#6853
Banned
iTrader: (3)
They are essentially a "street" version of the R888.
Were I to buy another "street" race tire, I'd stick with the NT-05s. Even though they are a bit harder (and a genuine street tire because of it), they stay grippy across a wider range of temperatures. They are also cheaper.
The R888 are much grippier, so why settle on a 140 UTQG R1R?
EDIT: I forgot the rest of the world has to deal with rain. I guess that might be a factor if you really drive on the street on those things.
Were I to buy another "street" race tire, I'd stick with the NT-05s. Even though they are a bit harder (and a genuine street tire because of it), they stay grippy across a wider range of temperatures. They are also cheaper.
The R888 are much grippier, so why settle on a 140 UTQG R1R?
EDIT: I forgot the rest of the world has to deal with rain. I guess that might be a factor if you really drive on the street on those things.
#6854
Rotary , eh?
iTrader: (1)
They are essentially a "street" version of the R888.
Were I to buy another "street" race tire, I'd stick with the NT-05s. Even though they are a bit harder (and a genuine street tire because of it), they stay grippy across a wider range of temperatures. They are also cheaper.
The R888 are much grippier, so why settle on a 140 UTQG R1R?
Were I to buy another "street" race tire, I'd stick with the NT-05s. Even though they are a bit harder (and a genuine street tire because of it), they stay grippy across a wider range of temperatures. They are also cheaper.
The R888 are much grippier, so why settle on a 140 UTQG R1R?
Well, I know I wouldn't go with the NT-05's because they are a drag radial, not a road race type tire. Maybe that's just me.
I know all the specs, that doesn't always tell the tale.
I've got R6's sitting here.
Just contemplating running another season on street tires before going to R-comps and if so, which ones to run. Kumho XS's, R1R's, etc, etc.
#6855
Rotary , eh?
iTrader: (1)
Mine is a dedicated track/race car so I don't have to worry too much about that myself either.
#6857
Rotary , eh?
iTrader: (1)
I was actually thinking you were talking about the NT-05R, which is a drag radial. Either way, wrong tire.
Not exactly. Just because it's sticky and low treadwear doesn't mean it's "basically a race tire". There are several things that make it a streetable/daily tire much moreso than a like-compound race tire. I wouldn't hesitate to run the nt-05 or the star specs, or the r1rs all summer, but wouldn't use the nt-01, or the r888's. As similar as they may seem, they are not made for daily/street use. They are track tires that are given a DOT tread rating because of the way race governing bodies deal with tires like this.
#6859
Rotary , eh?
iTrader: (1)
but not the same sidewall stiffness, nor the same tread pattern, nor the same pressure operating range - which has to do with sidewall stiffness and ply composition.
I wouldn't run the r888 on the street and re-reading what you originally posted i thought you concluded that too?
I wouldn't run the r888 on the street and re-reading what you originally posted i thought you concluded that too?
#6860
Banned
iTrader: (3)
but not the same sidewall stiffness, nor the same tread pattern, nor the same pressure operating range - which has to do with sidewall stiffness and ply composition.
I wouldn't run the r888 on the street and re-reading what you originally posted i thought you concluded that too?
I wouldn't run the r888 on the street and re-reading what you originally posted i thought you concluded that too?
But using your DOT rationale, I wouldn't run the R1Rs, either.
Their pressure op range and carcass is the same, BTW.
#6865
Registered
iTrader: (3)
Wow-- lots of response!
Good discussion all.
Some rational i used in mentioning what I did relavant to the discussion going on
.
Additional tire pressure is needed. Short session---really tight turns---he is going to need all the sidewall support he can get without overheating/over pressurization. No matter what you go out with always check them asap when you pit and then go from there as I mentioned. May need increasing, may need decreasing. Lot has to do with drivers style/track temps etc. I am afraid he is going to chunk that left front. 5 laps is not a lot, but there again I dont know how close the sessions are together.
R1's have a operating range from about 170 to a little over 200F when they are shaved. I dont know if his are shaved or not.
I and several others in our club have ran the R1's (always shaved, by the way the R 888 suck!) and they are a workhorse of a tire, we like them. They run better for us with a hot pressure of around 41-42.
I disagree about bleeding the brakes. Since i am assuming he doesnt have high temp track fluid now--it will be a good idea to go ahead and change. Will he absoulutly need it for this short session---maybe not. But I alway say, better safe than sorry, when it comes to brakes. Anyone here ever had a dead pedal?---- scary as hell. As yall know brake fluid also collects water over time and I dont know when was the last time he changed it out. Remember also this is on stock pads and they will not handle the heat as well.
He knows his way around cars and has autocrossed a good bit--i think he can handle a fluid swap out ok
And with that in mind I thought I would mention trail braking. This car handles that tech very well and this is a low speed turning track on non r compound tires. He can handle this with caution. he just has to remember smooth and with the nanny on(below) it will make it even easier.
I forgot to mention you probably want to do the 1st session with full nanny on, then progress to off if you find that it is not activating and you are ok with your speed.
Remember also if you are not activating the ABS then you are not using all your brake.. But to start with dont worry about using absoulutly all of your brakes.
Remember SMOOTH.
OD
Good discussion all.
Some rational i used in mentioning what I did relavant to the discussion going on
.
Additional tire pressure is needed. Short session---really tight turns---he is going to need all the sidewall support he can get without overheating/over pressurization. No matter what you go out with always check them asap when you pit and then go from there as I mentioned. May need increasing, may need decreasing. Lot has to do with drivers style/track temps etc. I am afraid he is going to chunk that left front. 5 laps is not a lot, but there again I dont know how close the sessions are together.
R1's have a operating range from about 170 to a little over 200F when they are shaved. I dont know if his are shaved or not.
I and several others in our club have ran the R1's (always shaved, by the way the R 888 suck!) and they are a workhorse of a tire, we like them. They run better for us with a hot pressure of around 41-42.
I disagree about bleeding the brakes. Since i am assuming he doesnt have high temp track fluid now--it will be a good idea to go ahead and change. Will he absoulutly need it for this short session---maybe not. But I alway say, better safe than sorry, when it comes to brakes. Anyone here ever had a dead pedal?---- scary as hell. As yall know brake fluid also collects water over time and I dont know when was the last time he changed it out. Remember also this is on stock pads and they will not handle the heat as well.
He knows his way around cars and has autocrossed a good bit--i think he can handle a fluid swap out ok
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
And with that in mind I thought I would mention trail braking. This car handles that tech very well and this is a low speed turning track on non r compound tires. He can handle this with caution. he just has to remember smooth and with the nanny on(below) it will make it even easier.
I forgot to mention you probably want to do the 1st session with full nanny on, then progress to off if you find that it is not activating and you are ok with your speed.
Remember also if you are not activating the ABS then you are not using all your brake.. But to start with dont worry about using absoulutly all of your brakes.
Remember SMOOTH.
OD
Last edited by olddragger; 02-24-2010 at 09:01 AM.
#6866
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone for their candid replies.
I’m used to running autocross and now venturing into road courses do in part because most of the Central Florida autox courses are very busy, very short in order to accommodate Miatas/Coopers and the amount of participants. Also, they make the courses busy in order to control the speed due to the limited amount of track running area. Not much joy of running a 23 to 47 second lap and trying to squeeze an RX8 thru a gate where Miata/Cooper can barely fit.
Anyway, thanks again and will let you know Sunday I bad I sucked on the road course.
I’m used to running autocross and now venturing into road courses do in part because most of the Central Florida autox courses are very busy, very short in order to accommodate Miatas/Coopers and the amount of participants. Also, they make the courses busy in order to control the speed due to the limited amount of track running area. Not much joy of running a 23 to 47 second lap and trying to squeeze an RX8 thru a gate where Miata/Cooper can barely fit.
Anyway, thanks again and will let you know Sunday I bad I sucked on the road course.
![Eyetwitch](https://www.rx8club.com/images/smilies/eyetwitch.gif)
#6867
Londons Yellow Peril
go Juan! fingers crossed.
PS Yokohama have a new tyre out now I believe a semi slick to compete with the 888 which will be a lot cheaper than their old AO48 or whatever it was called. It should be really good.
PS Yokohama have a new tyre out now I believe a semi slick to compete with the 888 which will be a lot cheaper than their old AO48 or whatever it was called. It should be really good.
#6870
Registered
#6872
Zoom-Freakin'-Zoom
iTrader: (5)
The two blue relay "holes" light up with a circuit light when testing there, but the multimeter doesn't show anything but a "-" symbol next to zeroes when touching the same "holes".
I put 2 new blue relays in (one for fuel pump and the other for circuit) and the pump still will not prime. I am testing by running a silicon hose from the fuel line ( the upper one that the red clip attaches to) into a small gas can. No fuel or smell whatsoever when attemting to crank. I don't know if i'm supposed to be able to hear the pump when it is trying to prime or run. I have the rear seat cushion and metal cover off and i don't hear anything. The interior lights and accessories all work.
Ideas??
I put 2 new blue relays in (one for fuel pump and the other for circuit) and the pump still will not prime. I am testing by running a silicon hose from the fuel line ( the upper one that the red clip attaches to) into a small gas can. No fuel or smell whatsoever when attemting to crank. I don't know if i'm supposed to be able to hear the pump when it is trying to prime or run. I have the rear seat cushion and metal cover off and i don't hear anything. The interior lights and accessories all work.
Ideas??
sorry have not been around much..
check every fuse in the efi block in your fuse panel.. that was the issue at my last track day.
oldragger was there..
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#6873
Zoom-Freakin'-Zoom
iTrader: (5)
juan,
you might give me a pm or a call before that..
i have done it. i think i got a third in a time attack.. just saying..
fool and money..
just saying..
i think you have my phone #
beers
you might give me a pm or a call before that..
i have done it. i think i got a third in a time attack.. just saying..
fool and money..
just saying..
i think you have my phone #
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
Denny,
I’m going to run my first road course Sunday. It is a very short course here in Central Florida. Yes, I know about the ones you participate but I’m baby stepping on this one before I try to run with the big boys. The road course layout is in the attached picture and youtube videos.
http://www.youtube.com/watch?v=18WsPm47D7M
http://www.youtube.com/watch?v=O0QG7...rom=PL&index=3
You pretty much know my car setup and I’m rolling on Toyo Proxes R1R (very sticky DOT tires). No, I don’t have the time or money to buy or change tires/setups at the moment cuz I’m in the process of buying/selling a house and I just want to run my car this Sunday to blowup some steam.
Anyway, since you are a marine and always a marine, could you please reply with some pointers in kiss (keep it simple stupid) format. For example tire pressure, rear end-links adjustment and SC RX8 driving technique.
This is a non-timed event. No transponders will be issued. It will be a clear day with temps in the 60, 3 to 5 laps per session and starting at 9am.
Also, I don’t give a **** about wining as to most of the things I do in life. I just want to enjoy running my car fast without worrying about the Po-Po issuing a speeding ticket.![Eyetwitch](https://www.rx8club.com/images/smilies/eyetwitch.gif)
Thanks,
Juan
I’m going to run my first road course Sunday. It is a very short course here in Central Florida. Yes, I know about the ones you participate but I’m baby stepping on this one before I try to run with the big boys. The road course layout is in the attached picture and youtube videos.
http://www.youtube.com/watch?v=18WsPm47D7M
http://www.youtube.com/watch?v=O0QG7...rom=PL&index=3
You pretty much know my car setup and I’m rolling on Toyo Proxes R1R (very sticky DOT tires). No, I don’t have the time or money to buy or change tires/setups at the moment cuz I’m in the process of buying/selling a house and I just want to run my car this Sunday to blowup some steam.
Anyway, since you are a marine and always a marine, could you please reply with some pointers in kiss (keep it simple stupid) format. For example tire pressure, rear end-links adjustment and SC RX8 driving technique.
This is a non-timed event. No transponders will be issued. It will be a clear day with temps in the 60, 3 to 5 laps per session and starting at 9am.
Also, I don’t give a **** about wining as to most of the things I do in life. I just want to enjoy running my car fast without worrying about the Po-Po issuing a speeding ticket.
![Eyetwitch](https://www.rx8club.com/images/smilies/eyetwitch.gif)
Thanks,
Juan
#6874
Rotary engine addict
Join Date: Jun 2008
Location: Guadeloupe (FWI)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
#6875
force water thru it from the (full) reservoir. and make sure that there is no air in the pump at all. Cam has extras and I even have a spare but these pumps seem to last quite a while but do lose prime occasionally. Maybe some one else can be more technical with the way to do it but this is all I do.