Pettit Super Charger Owners
#1927
#1929
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
A friend sent me this info:
http://www.innovatemotorsports.com/r...s/OpenTune.pdf
I called Innovatemotorsports technical support and was told that it will work on an RX8.
Sells for @ $150
Feedback please.
http://www.innovatemotorsports.com/r...s/OpenTune.pdf
I called Innovatemotorsports technical support and was told that it will work on an RX8.
Sells for @ $150
Feedback please.
#1930
#1933
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Check out my last AutoX event in Ganesville, FL
Ops, got to exited at the end of the run.
http://www.youtube.com/watch?v=2iU3LCgGV4o
Ops, got to exited at the end of the run.
http://www.youtube.com/watch?v=2iU3LCgGV4o
Last edited by marsredr100; 04-30-2008 at 07:32 PM.
#1934
Registered
iTrader: (3)
got my efi dude today and made a little run--now i wish I knew what the hell it meant.
got my innovate wideband working--ashtray mount--turned out well. I used the 2nd o2 sensor power source(i have a midpipe anyway) and water meth kit is installed ---trunk mount---a 175 nozzle pre blower. also am monitoring intake temps at the upper intake manifold junction with the lower. Now that I feel a little less gun shy i ran her a little hard. Found out my tach is off about 500 rpm, also found out this damn car is FAST! Holey Mother of God--4th gear--100MPH and the front end is still lifted.
denny
got my innovate wideband working--ashtray mount--turned out well. I used the 2nd o2 sensor power source(i have a midpipe anyway) and water meth kit is installed ---trunk mount---a 175 nozzle pre blower. also am monitoring intake temps at the upper intake manifold junction with the lower. Now that I feel a little less gun shy i ran her a little hard. Found out my tach is off about 500 rpm, also found out this damn car is FAST! Holey Mother of God--4th gear--100MPH and the front end is still lifted.
denny
#1939
Registered
iTrader: (3)
just got back from the Mitty at Road Atlanta and spoke of our kit to the Flying Miata people and I showed Paul from Mazmart my intre setup ---they all loved it --said it was good. trying to spread the word a little---and while i was at it i heard a group of 4 rotor gtp(?) historical cars race. NICE
olddragger
olddragger
#1941
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
78 degrees Amb temp - 105 degrees AIT (sensor located after blower) - 195 degrees engine temp at 60/65/70 mph. All temps remained constant at every speed interval while cruising on a flat central Florida straight road.
The AIT registered 107 degrees and 197 engine temp when I bumped the speed to 75 and 80 mph.
After cruising I did a couple of WOT runs (one after the other) with the second reaching 130 mph.
Here are my readings just after the second WOT run.
78 degrees Amb temp - 123 degrees AIT - 202 degrees engine temp.
Also, I was not able to log my trip with the EFIdude due to operator headspace error but I do notice more air filter noise. I assume that I'm able to draw more air because the HPS air filter material is not as compact as the K&N air filter brand. Thus my reason for purchasing the HPS air filter. However, the EFIdude logger will let me know for sure if the air gallons per second went up next time I take the car for a spin since I have plenty of data at WOT with the old K&N filter.
#1942
Registered User
iTrader: (1)
Join Date: Jun 2007
Location: Houston, TX
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Next on the drawing board is a metal version of our Pettit SC kit air bypass valve that I purchased on eBay. It should arrive this week and I'll let you know (as always) my findings. It is basically the same thing except that all the components are made of aluminum instead of plastic. I showed it to Cam and he said he likes it and he reminded me to not use any of the springs.
http://cgi.ebay.com/ebaymotors/Bosch...mZ360031281185
http://cgi.ebay.com/ebaymotors/Bosch...mZ360031281185
#1946
Next on the drawing board is a metal version of our Pettit SC kit air bypass valve that I purchased on eBay. It should arrive this week and I'll let you know (as always) my findings. It is basically the same thing except that all the components are made of aluminum instead of plastic. I showed it to Cam and he said he likes it and he reminded me to not use any of the springs.
http://cgi.ebay.com/ebaymotors/Bosch...mZ360031281185
http://cgi.ebay.com/ebaymotors/Bosch...mZ360031281185
You should see the one on Phil's car.
#1948
Registered
iTrader: (3)
Thanks Silver for posting these---he knows my rep concerning posting pics!
Thanks for the thumbs up all!
Some details
1- pettit kit(black version thanks to Moon!)
2-Mazsports ignition solution---i aint smart like Juan!--it is a beatiful set up
3- Mazsports custom windshieldwasher tank and their firewall mount
4- custom oil filter relocate with heat guard--via Adams racing!
5- Snows water meth system -- maf controller on the firewall, water meth line routed through the center console--7 quart tank in trunk, solenoid custom mount(can you find it?), one 175 nozzle pre blower.
6- gauges are pro sports water/oil temps, autometer intake temp and innovate wideband(custom mount in ashtray--yes the lid closes--LED lights in the ashtray for the wide band and the w/m system.
7- switch on console for w/m activation
8 rp short shifter
9 cant see it but MS double resonated midpipe --amazing sound with the rb catback--made wideband easy to install also.
10- cant see but mazmarts water pump.
11- removed airpump and custom mount heat shield between header and lower intake
12- did you notice that the heater hose on the firewall is gone?---i ran it under the car--removed some heart from around the intake etc and made for more room
13- heat wrapped the a/c line
14 mazdaspeed strut of course
i have some other stuff also you cant see. like the efi dude, clutch flywheel, suspenion etc
anyone want details of a particular--i will be glad to share whant I know.
A big thanks to Juan , Pettit, Mazcare, Mazsport, Mazmart, Silvereight and all others i may not have mentioned that my old brain cant remember---its a great community!
olddragger
Thanks for the thumbs up all!
Some details
1- pettit kit(black version thanks to Moon!)
2-Mazsports ignition solution---i aint smart like Juan!--it is a beatiful set up
3- Mazsports custom windshieldwasher tank and their firewall mount
4- custom oil filter relocate with heat guard--via Adams racing!
5- Snows water meth system -- maf controller on the firewall, water meth line routed through the center console--7 quart tank in trunk, solenoid custom mount(can you find it?), one 175 nozzle pre blower.
6- gauges are pro sports water/oil temps, autometer intake temp and innovate wideband(custom mount in ashtray--yes the lid closes--LED lights in the ashtray for the wide band and the w/m system.
7- switch on console for w/m activation
8 rp short shifter
9 cant see it but MS double resonated midpipe --amazing sound with the rb catback--made wideband easy to install also.
10- cant see but mazmarts water pump.
11- removed airpump and custom mount heat shield between header and lower intake
12- did you notice that the heater hose on the firewall is gone?---i ran it under the car--removed some heart from around the intake etc and made for more room
13- heat wrapped the a/c line
14 mazdaspeed strut of course
i have some other stuff also you cant see. like the efi dude, clutch flywheel, suspenion etc
anyone want details of a particular--i will be glad to share whant I know.
A big thanks to Juan , Pettit, Mazcare, Mazsport, Mazmart, Silvereight and all others i may not have mentioned that my old brain cant remember---its a great community!
olddragger
#1950
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
^^^
Looks great.
Have you monitored your intake temps with the methanol injection? I'm curious about a before and after...
Also, at what point or lbs/min does the meth injection activate on your setup?
Looks great.
Have you monitored your intake temps with the methanol injection? I'm curious about a before and after...
Also, at what point or lbs/min does the meth injection activate on your setup?