View Poll Results: Which to use for hot side pipes? Stainless or Aluminized?
Stainless - I don't care about higher price I want it to be nice and shiny.
4
50.00%
Aluminized - Keep the costs low. As long as it reasonably clean and runs well I am in
4
50.00%
Voters: 8. You may not vote on this poll
RotoRocks Remote Turbo Stage II
05-08-2008, 11:25 PM
#329
05-09-2008, 07:36 AM
#330
RotoRocks Powered
Thread Starter
You know, when i was like 18 I used to say that for free comes only two things - Water and *****. 
Now that I am near 34, I find that to be very untrue.
Decent water is bottled, and the other gets wiser with age and required expensive presents
So good luck with the freebies search here, brother
Now that I am near 34, I find that to be very untrue.
Decent water is bottled, and the other gets wiser with age and required expensive presents
So good luck with the freebies search here, brother
05-09-2008, 01:18 PM
#333
RotoRocks Powered
Thread Starter
Well it is sorta available even now. First come first serve bases.
Now that it has in internal waistgate, it is real easy to make the manifold. So I can make them myself without too much effort.
You want one?
Now that it has in internal waistgate, it is real easy to make the manifold. So I can make them myself without too much effort.
You want one?
05-09-2008, 02:30 PM
#336
OMGITM!
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
Waiitt a darned second, your kit is complete running well? Not enough time to read all 14 pages to I glanced at 1, 13 and 14 and you're finished? If so, get a list of parts/final price and you'll have a long list of buyers in no time!
05-09-2008, 02:42 PM
#337
RotoRocks Powered
Thread Starter
Oh boy! I had no clue I had such a silent fan base 
It is never complete. there is always room for improvement but with that said, and considering the price (which I can not announce on public thread, as I am not a forum vendor) it is quite a fun bang for the buck
there is still work to be done, off course, but like I said without rushing too much I can break them off one by one quite nicely for your driving pleasure
oh and you are missing all the shiny pics if youre not going through all the pages. this thread has tons of em.
It is never complete. there is always room for improvement but with that said, and considering the price (which I can not announce on public thread, as I am not a forum vendor) it is quite a fun bang for the buck
there is still work to be done, off course, but like I said without rushing too much I can break them off one by one quite nicely for your driving pleasure
oh and you are missing all the shiny pics if youre not going through all the pages. this thread has tons of em.
Last edited by rotorocks; 05-14-2008 at 08:32 PM.
05-09-2008, 03:38 PM
#338
Drive Master
Join Date: Nov 2003
Location: Redmond
Posts: 1,670
Likes: 0
Received 0 Likes
on
0 Posts
You do, of course, have tech drawings, right? So you could sell me plans for the custom bits and I can substitute in the generic stuff per my own twisted designs. Not for resale or competition. I'm just picky and have some stuff I want to try while piggy backing on your exploits.
05-09-2008, 05:56 PM
#339
OMGITM!
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
Oh boy! I had no clue I had such a silent fan base
It is never complete. there is always room for improvement but with that said, and considering the price (which i can not announce on public thread, as I am not a forum vendor) it is quite a fun bang for the buck
there is still work to be done, off course, but like I said without rushing too much I can break them off one by one quite nicely for your driving pleasure
oh and you are missing all the shiny pics if youre not going through all the pages. this thread has tons of em.
It is never complete. there is always room for improvement but with that said, and considering the price (which i can not announce on public thread, as I am not a forum vendor) it is quite a fun bang for the buck
there is still work to be done, off course, but like I said without rushing too much I can break them off one by one quite nicely for your driving pleasure
oh and you are missing all the shiny pics if youre not going through all the pages. this thread has tons of em.
05-11-2008, 08:17 PM
#340
RotoRocks Powered
Thread Starter
You do, of course, have tech drawings, right? So you could sell me plans for the custom bits and I can substitute in the generic stuff per my own twisted designs. Not for resale or competition. I'm just picky and have some stuff I want to try while piggy backing on your exploits.
My earlier answer was too complicated, and confused people.
Basically what it meant was that I do not want to sell or give away any tech drawings, blueprints or measurements.
Sorry.
I was laying under the car juggling the turbo and sweating like a pig to get it to fit. It took me time and money. if you like the setup, and feel like you want one, and wanna do it yourself, feel free. There is enough info on what and how it can be done. If you want to DIY this, then do it.
Otherwise, I will gladly take your order.
Last edited by rotorocks; 05-20-2008 at 09:58 AM.
07-30-2008, 09:57 AM
#348
RotoRocks Powered
Thread Starter
LOL
no I am alive
nothing to report really.
Just been busy lately and haven't had time to do any work on the car or to post.
Work got busy, I am taking some psychology classes after work. Got a different car for a daily driver and i am in the process of buying a house. So with all this going on I just haven't had any time.
EDIT:
Oh I just realized that I never mentioned this on the forums (I thought i did, but it was from speaking to some folks privately):
Like I said, I got another car now. The reason: dead motor, just over a month ago. This time it is because of a turned shaft bearing.
At this time the car is parked in my driveway, and it will remain there until I get the time and money to get it rebuilt again.
no I am alive
nothing to report really.
Just been busy lately and haven't had time to do any work on the car or to post.
Work got busy, I am taking some psychology classes after work. Got a different car for a daily driver and i am in the process of buying a house. So with all this going on I just haven't had any time.
EDIT:
Oh I just realized that I never mentioned this on the forums (I thought i did, but it was from speaking to some folks privately):
Like I said, I got another car now. The reason: dead motor, just over a month ago. This time it is because of a turned shaft bearing.
At this time the car is parked in my driveway, and it will remain there until I get the time and money to get it rebuilt again.
Last edited by rotorocks; 07-30-2008 at 02:44 PM.
07-30-2008, 11:15 PM
#350
RotoRocks Powered
Thread Starter
Woah!! Someone just can't get over the little rejection, huh?
tsk, tsk, tsk...
Would you feel different if I had agreed to make one for you FREE?
tsk, tsk, tsk...
Would you feel different if I had agreed to make one for you FREE?