When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is this "disabling the LTFT regime" you speak of?
My personal thoughts on the Adaptronic: I have been reading about it since 2012. It has its benefits and if there weren't other things I would like to spend that kind of money on then I would likely pick one up. But the AP has worked well for me so far and I would need it anyway for emissions, no? So... Plus it is one more layer on the onion that already makes me cry at times. I've got nothing against it by any means. Just no compelling reason in my situation at this time to drop the cash on one. But I am watching others experience with a touch of envy
What is this "disabling the LTFT regime" you speak of?
My personal thoughts on the Adaptronic: I have been reading about it since 2012. It has its benefits and if there weren't other things I would like to spend that kind of money on then I would likely pick one up. But the AP has worked well for me so far and I would need it anyway for emissions, no? So... Plus it is one more layer on the onion that already makes me cry at times. I've got nothing against it by any means. Just no compelling reason in my situation at this time to drop the cash on one. But I am watching others experience with a touch of envy
Set closed loop exit to 500 rpm .... no more closed loop .
Not great for fuel economy but good for high load consistency . I ran mine like that for a few months but eventually decided i liked the fuel economy , plus if your system is good , it's not necessary.
Set closed loop exit to 500 rpm .... no more closed loop .
Not great for fuel economy but good for high load consistency . I ran mine like that for a few months but eventually decided i liked the fuel economy , plus if your system is good , it's not necessary.
It's a good strategy for tuning, easier than disconnecting the front O2 sensor
It's a good strategy for tuning, easier than disconnecting the front O2 sensor
Agreed! Sorry if I gave the wrong impression. I've used the strategy myself. I just went down the rat hole of thinking there was a magic "Disable LTFT" option I had missed
Installed Autolite AR3932 plugs tonight. If they work out it will be a cheap alternative I can pick up locally when needed.
Update on the AR3932 plugs I installed back in January. I have been getting a few occasional misfires so I checked the plugs last night. They were pretty well worn so I replaced them. Much better They lasted 6 months running 10psi boost. Started out gapped at 0.025" and ended up worn to about 0.040". Not sure how many miles it has been, but unless there is bad weather this is my daily driver. At $3.99/ea I don't mind changing them a couple times a year.
Car is still running great. Always tinkering. I think the AR3932 plugs were too cold. Switched to NGK 5255 all around. Used an extra washer on the trailing (Team need not chime in ). Running 12psi now. Considering WI before I go any higher.
Couple of 2'nd gear graphs. I'd do 3'rd gear but afraid they'd get pulled down for street racing, JK!
Got a fairly deep scratch in my door so I'm learning to paint.
Nice numbers slash. I'll be back home in about 2 weeks to get my turbo rebuilt and hopefully everythign will be running right before I have to come back to work in 6 weeks. It'll be nice to bump it up above 6 psi.
After I popped the motor last year I promised myself 10psi max for awhile. Well, I've crossed back over that line. I figure it's only a matter of time at this point...
After I popped the motor last year I promised myself 10psi max for awhile. Well, I've crossed back over that line. I figure it's only a matter of time at this point...
I have a hose from the LIM hooked up to a snorkel into my ears. Based on free diving experience I can tell how much pressure there is by my ears popping. Then I type really fast when I take logs.
Kidding I'm not logging boost. That boost graph is actually load. A trick Fazda showed me. You can pick any column for boost or AFR in VD.