slash128's Top Mount Build
#1677
n3rd
Thread Starter
#1683
n3rd
Thread Starter
Going great! Just enjoying the car. Ethanol fuels have evaporated from the area so I've backed off pushing the boost. Sitting comfortably at 17psi with no plans to go up from there...
#1684
n3rd
Thread Starter
Where are you Travis? I keep looking in my rear view thinking of this post
#1685
care to post a VD on 17psi?
#1686
n3rd
Thread Starter
Nah, I'd rather not embarrass Cran, he's pretty cool...
Kidding Cran I just like the banter, your car is sweet
I've been working on something so it's not optimal ATM but I will work on it. The main thing I have been working on is this bug around 5K in 1'st and 2'nd. For some reason if I accelerate slowly in 1'st or 2'nd it goes a lean around 5K and makes the car lurch. STFT pegs out to +25%. It subtly happens in 3'rd too, but doesn't always happen and never seems to happen at all if I accelerate quickly or WOT. I'm thinking it has something to do with the difference between my yellow P1's and ID1K's. I've posted about it previously and after much experimenting have just come to the point of band-aiding it by bringing my CL exit RPM down to 4500. Doesn't seem to happen OL
Kidding Cran I just like the banter, your car is sweet
I've been working on something so it's not optimal ATM but I will work on it. The main thing I have been working on is this bug around 5K in 1'st and 2'nd. For some reason if I accelerate slowly in 1'st or 2'nd it goes a lean around 5K and makes the car lurch. STFT pegs out to +25%. It subtly happens in 3'rd too, but doesn't always happen and never seems to happen at all if I accelerate quickly or WOT. I'm thinking it has something to do with the difference between my yellow P1's and ID1K's. I've posted about it previously and after much experimenting have just come to the point of band-aiding it by bringing my CL exit RPM down to 4500. Doesn't seem to happen OL
#1687
#1689
shots fired
#1690
Hybrid Greddy Boosted
Try increasing your entire secondary latency table by 20% to see if that improves the AFRs. PM if you want more details on this. I just spent 3 months dialing in my Bosch EV14s, and it only took several sessions of that time to do final 90% of the tuning once I understood what I was doing
#1691
n3rd
Thread Starter
#1692
n3rd
Thread Starter
Try increasing your entire secondary latency table by 20% to see if that improves the AFRs. PM if you want more details on this. I just spent 3 months dialing in my Bosch EV14s, and it only took several sessions of that time to do final 90% of the tuning once I understood what I was doing
#1693
#1694
n3rd
Thread Starter
This is a preliminary 2'nd gear log. I was able to get some traction back by lowering tire pressure. A little leaner than I like in a few spots, but no timing getting pulled, still working on it. I'll get around to a 3'rd gear log at some point...
#1699
n3rd
Thread Starter
No water/meth...playin' with fire....
#1700
n3rd
Thread Starter
It is interesting, as I've been working on the low load areas of the VE table around 5000 RPM to sort out my slow acceleration lean issue it seems to influence the high load fueling. The more I raise the VE at the low end the leaner it seems to get at the high end, so I have to go in and tweak the high end up.