Aoshi Shinomori

Does that dyno say from September 2005? :p Numbers look good, kee us updated SSR/SFR.

Richard Paul

iTrader: (5)

It means Feb 9 2005
The way they say it "over there"

swoope

iTrader: (5)

let me get this straight, i just read this whole thread and we are getting rwh #s from a dyno in az that is from the uk?????? why no pulls from 1k to 9.5k????

btw, how can you sell a turbo kit without any engine management???? my guess is that 98% of your market doesnt have a cz, emanage or ric shaw unit.

the more i read this thread the more i wait to upgrade.

beers

crazy naked man

I'm not trying to flame anyone's personal preferences here, but ever since this car came out, I have been amazed at the number of Autos out there. I have to wonder why anybody would choose to buy a performance car like this in auto? THe manual shifting is part of what makes the driving experience. (IMHO)

guitarjunkie28

i agree, but not everyone likes shifting.

i still really REALLY wanna see a 4-port turbo renesis.

rotarygod

Dave, you do know that the 4 port Renesis is really nothing more than a 6 port without the auxillaries cut in don't you? The secondaries are just as small as the 6 port secondaries and so are the runners. This is very different than the large secondaries on the 4 port engines of the past.

LittleJohn

Thanks for that... look really good... but a dumba$$ question...
How come there is not data for the lower rpm range... like from about 1500rpm?

truemagellen

they haven't responded to that question but my guess is this is where the Turbo kicks in

rx8wannahave

I guess they have not said why it stops at 7.8-8K either right?

Rotoman

The car was Running too lean, needed bigger injectors and that's what they are doing now, then they will post the new dynos with the bigger injectors..I'll call see what's happening...

dmp

...My guess is:

"Nobody cares what an RX8 makes, powerwise, below about 3000 rpms"



I don't.

Rotoman

Just talked with Tim from SFR they installed the new injectors and are taking the RX8 to the dyno, next day or two will have the new dynos...

SSR Engineering

We re-dynoed it yesterday and we are in the process of getting some video footage recorded today

Rotoman

Latest update from SFR. Keith said with new injectors and brought the timing back slightly the car made 290 at the wheels at around 8,000rpm's..

keith said tha's without the straight pipe and water injector kit that they wanted to do, but their customer wants the car back... I'am sure to injoy....

Keith also said they have another customer that they will be installing this kit with the straight pipe and water injection and should pull 335-350 at the wheels safely at 12psi boost. my kits coming shortly... Keith said they will post asap with videos, Keith said he knows we are all waiting, but it's been hard with the work thay have ...

smrx8

iTrader: (1)

WOW 12 PSI !!! A LITTLE TO MUCH i think were asking for trouble

Rotoman

I hope not, that's the kit I'am buying with the straight pipe and water injection, Keith did say it would be safe because we're cooling down the unit and that will run on pump gas also.

Aoshi Shinomori

Make sure you don't run out of water :p

therm8

Using WI to raise boost is a bad idea, in my opinion. But hey, it's not my car.

Rotoman

That's true it's not your car, I have seen it done in corvette's mine included and works well, I'am not saying you don't have to be careful, you do, but putting in a Turbo or Supercharger you have to watch what the hell your doing also, but the benefits are there..

dmp

this seems crazy - all this power, yet no/little mention of the strength of our apex seals...

Rotoman

Actually, the seals are supposedly safe to handle 13psi boost with no problem, that's not to sayI will be pushing them that hard, but I might

dmp

I'll have to research that for my own good - I wonder where the magic number 13 came from?

Hurm...

Rotoman

I will tell you this ,it did'nt come from me. But I did have the opportunity to meet this guy in California a month ago and I'll tell you this , If he does'nt know about the RX8 NOBODY DOES... I know he see this from time to time so I hope you can chime in (BC) ok, or call me..

Richard Paul

iTrader: (5)

It's OK, you can't make a lot of pressure when you put the fire out with water. The pressure comes from expansion which comes from the burn and heat. Why bother to make it and spend the energy? Why not design a usable system to start with that doesn't need band-aids??

The best systems don't go into abnormal combustion, only to need to get reversed.

therm8

I'm not disagreeing with the benefits of WI, I used it on my Volvo to keep the 15psi charge cooler in the hot and humid Florida summers (ie used it to increase the margin to detonation near the normal running boost(with chip)). But using it to raise max safe boost seems like compensation for poor design to me. You want 12psi, design the intercooler for it. Just my philosophy. But hey, as long as it's got water and the jets work, it'll do the job i guess.