The Turblown Low Mount Turbo System
#377
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
I knew that POS wasn't going to work the first time I layed eyes on it. Hoss is just a great guy with an always optimistic outlook so he gives everyone the benefit of doubt. Hopefully his politeness and patience pays off and the right thing is done and this remedied.
Last edited by 9krpmrx8; 09-26-2012 at 02:53 PM.
#378
Original Turbo 'd Auto !!
#388
Registered
iTrader: (25)
I'm sure the guy you made that statement to felt the same way, but my only intent is not to see someone played for a patsy and it happens all too much around here
when I tried to warn people about jumping in both feet first over what to me was just a bunch of unsubstantiated hype I got the usual Team's just being a jerk replies or was otherwise ignored
.
when I tried to warn people about jumping in both feet first over what to me was just a bunch of unsubstantiated hype I got the usual Team's just being a jerk replies or was otherwise ignored
.
Last edited by TeamRX8; 09-30-2012 at 11:34 PM.
#390
Original Turbo 'd Auto !!
no i didn't. car is up on stands and i was "re-tasked" amongst other things.
however the only thing i saw was the tab that bolts to the motor mount, had bent. i guessing by eye-balling it, its 3/8 thick stainless. 1/4 shouldn't bend, well depending on what it's made out of and if it was hardened.
I wasnt able to get my mic in that space to measure.
however the only thing i saw was the tab that bolts to the motor mount, had bent. i guessing by eye-balling it, its 3/8 thick stainless. 1/4 shouldn't bend, well depending on what it's made out of and if it was hardened.
I wasnt able to get my mic in that space to measure.
#392
#393
SARX Legend
iTrader: (46)
Well that's good. Are you going to fix the kit? I'm not sure exactly where Hoss is at with him, I think he is just going to get the stuff fixed locally though to avoid more headaches.
#398
This is the email I got back in July. I shipped back the parts he outlined at my expense, pretty much all the major components including the turbo. He signed for them on 8/2/2012 and said it would take about 4 weeks. I emailed several times in August. Because of all the problems I suggested he consider letting me return the kit and I would even pay the restocking fee. On 8/27/2012 he finally replied and said he hoped to ship at the end of that week. I have not seen parts nor heard from him since, which is why I opened the dispute.
From: turblown@gmail.com [mailto:turblown@gmail.com]
Sent: Tuesday, July 24, 2012 1:47 PM
To: Jason Granat
Subject: Re: Fitment Issues
Jason,
You will have to ship the intercooler, brackets, hotside piping, turbo manifold, turbo, and motor mount bracket back for these modifications. I will also change the intercooler brackets out for better fitment, along with a better design.
Elliot White
Turblown Engineering LLC, CEO
TurboSource LLC, Pres
Not yet. I opened a dispute and got a credit back from credit card company. However, Elliot is challenging the dispute. So he's got most of the kit, turbo and all, and still wants to fight.
From: turblown@gmail.com [mailto:turblown@gmail.com]
Sent: Tuesday, July 24, 2012 1:47 PM
To: Jason Granat
Subject: Re: Fitment Issues
Jason,
You will have to ship the intercooler, brackets, hotside piping, turbo manifold, turbo, and motor mount bracket back for these modifications. I will also change the intercooler brackets out for better fitment, along with a better design.
Elliot White
Turblown Engineering LLC, CEO
TurboSource LLC, Pres
Not yet. I opened a dispute and got a credit back from credit card company. However, Elliot is challenging the dispute. So he's got most of the kit, turbo and all, and still wants to fight.
#399
SARX Legend
iTrader: (46)
Ouch, i was under the impression you only sent a couple of items back. Well I hope you end up being made whole. Typically they side with the card holder though, so you should be good.