Turbo Recommends?
#1
Turbo Recommends?
Hey everyone. I'm pretty new here, and just recently bought a 2004 Rx8 w/ Lightning Yellow. Only mods it had was a K&N Typhoon Intake System.
Anyways, I was hoping I could get some suggestions on a good turbo kit. I am looking to spend the Least amount of money possible, but still get some good torque (and hp) out of it. So....
1. Would I be cheaper off buying a complete kit? If so, any cheap suggestions that wont wreck my engine?
2. If I am cheaper off getting all the parts seperate, how much would that cost and what exactly would I need?
I know this is a big question to be asking as there are sub-questions, but any feedback is greatly appreciated!
Regards,
Ty
Added:
If I was to go seperate, how careful do I have to be with the parts I get?
Anyways, I was hoping I could get some suggestions on a good turbo kit. I am looking to spend the Least amount of money possible, but still get some good torque (and hp) out of it. So....
1. Would I be cheaper off buying a complete kit? If so, any cheap suggestions that wont wreck my engine?
2. If I am cheaper off getting all the parts seperate, how much would that cost and what exactly would I need?
I know this is a big question to be asking as there are sub-questions, but any feedback is greatly appreciated!
Regards,
Ty
Added:
If I was to go seperate, how careful do I have to be with the parts I get?
Last edited by FungsterRacing; 08-04-2010 at 11:47 PM.
#6
the giant tastetickles
Join Date: Sep 2005
Location: in the basement
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
1. What is the rough estimated hp range you are trying to achieve?
2. How much money have u saved up for the FI kit?
3. How much research have you done regarding the engine?
4. What are you thinking of tuning the mods with?
5. Do you want it to be strictly turbo or wouldn't mind supercharged?
2. How much money have u saved up for the FI kit?
3. How much research have you done regarding the engine?
4. What are you thinking of tuning the mods with?
5. Do you want it to be strictly turbo or wouldn't mind supercharged?
#10
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,229
Received 210 Likes
on
158 Posts
Since you asked for turbo stuff none of these links contain supercharger stuff; you got alot of reading to do:
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/power-adders-fi-dummies-turbo-supercharger-nitrous-122645/
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/turbo-owners-fill-out-please-121542/
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/greddy-turbo-kit-f-qs-post-them-here-59834/
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/definitive-greddy-turbo-fixes-here-they-81825/
https://www.rx8club.com/series-i-major-horsepower-upgrades-93/highest-horsepower-dynos-sc-turbo-nitrous-post-them-here-180037/
Now for tuning you'll most likely need to hunt down a used AccessPORT:
https://www.rx8club.com/mazdamaniac-183/cobb-accessport-discussion-140117/
https://www.rx8club.com/mazdamaniac-183/new-mazdamaniac-base-calibrations-162263/
https://www.rx8club.com/mazdamaniac-183/accessport-instructions-instructions-197783/
After you have read all of these threads search for anything else you may have questions about. Helpful things too look at are other peoples build threads. After you do ALOT of research you can then ask questions that aren't so easily found all over this forum. There is no quick and easy; cheap and dirty way to go FI on this car, hence why it is such an enthusiasts car. Doing so WILL give you grief.
#12
RX-8 = Japanese MG
Join Date: Dec 2006
Location: Bay area, CA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
You will blow your engine if you turbo it and keep the turbo on for a long time.
There is a 100% chance of it. So, have the money to rebuild your engine or don't do it.
There is a 100% chance of it. So, have the money to rebuild your engine or don't do it.
#13
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,229
Received 210 Likes
on
158 Posts
If you know how to maintain you engine and keep up with regular maintenance while building up your supporting mods a turbo 13b will last you a long time... it is a never ending process though
#15
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,229
Received 210 Likes
on
158 Posts
^ I just bought the GReddy turbo kit with BOV, gauges and AP; about $6000 (CAD) for that stuff after you include shipping and US exchange rate. Of coarse there is always the route of buying a used turbo kit; that can be alot cheaper but personally I just like buying stuff brand new.... but this is only the beginning, gonna buy midpipe, ignition, CAI, Boost controller and eventually water/meth injection and upgraded turbo. Then I'll need to look into other cooling mods such as a new radiator/intercooler, upgrading my fuel pump and injectors to handle the extra air flow and getting some more gauges. (Oil Temp, Oil Pres., EGT).
As you can see a turbo kit can be relatively cheap; but once you add all the smaller supporting mods to get it to run efficiently and reliably the price adds up... Rx8's aren't cheap and require lots of attention; but with all this said and done they can be effin amazing cars!
As you can see a turbo kit can be relatively cheap; but once you add all the smaller supporting mods to get it to run efficiently and reliably the price adds up... Rx8's aren't cheap and require lots of attention; but with all this said and done they can be effin amazing cars!
#16
Almost boosted
iTrader: (3)
used kits can be expensive, base kit is just a starting point regardless, i need new couplers when i inspected them, plus missing a few, typical missing the oil lines and oil pan drain back, greddy wants 100$+ for that stupid bolt.
then my mm upgrade was about 2 grand with new injectors, and that is way over a 1 year wait so far. so expensive time consuming, pita to isntall due to location.
then my mm upgrade was about 2 grand with new injectors, and that is way over a 1 year wait so far. so expensive time consuming, pita to isntall due to location.
#20
4000$ is not even to be considered a budget for a turbo build unless you can build your own parts. Double that and come back. In the mean time searching and reading will help you a lot in picking the right route.
#22
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,229
Received 210 Likes
on
158 Posts
$4680.33 for GReddy Kit + BOV (New)
$694.27 for AP + MM tune
$648.97 for Boost, A/F, Fuel Pres., Lotek Pod
$500 for Misc. stuff that I may need during installation (I'll say $500 to way overshoot actual cost)
GRAND TOTAL: $6523.57 (CAD) Yes that's Canadian Dollars with about $0.94USD for every $1CAD; shipping and taxes included...
As you can see from my above post I have alot more planned but for a beginning I'd say a functional turbo kit is 6-12k (USD).
$694.27 for AP + MM tune
$648.97 for Boost, A/F, Fuel Pres., Lotek Pod
$500 for Misc. stuff that I may need during installation (I'll say $500 to way overshoot actual cost)
GRAND TOTAL: $6523.57 (CAD) Yes that's Canadian Dollars with about $0.94USD for every $1CAD; shipping and taxes included...
As you can see from my above post I have alot more planned but for a beginning I'd say a functional turbo kit is 6-12k (USD).
#24
SPOOLN8
iTrader: (1)
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,229
Received 210 Likes
on
158 Posts
^ So little gains from the flywheel though would only do that if I was already replacing clutch.... obviously not from my own experience and not trying to start an argument but from what I've read. And where do you find good Lightweight wheels with rubber for less than 3k? I guess depending on the sizes you are looking at... but I'm thinking all that would run you more around 5-6K, especially if you want to get that stuff in Canada; which the OP would.
#25
I divide by zero
Join Date: Aug 2007
Location: Spring Hill, FL
Posts: 1,192
Likes: 0
Received 0 Likes
on
0 Posts
Actually, I built my kit for about 3k including the Accessport.....but I built it. Over 300rwhp on low boost and a crappy tune... more coming soon with a proper tune