Twin-Screw grunt for Auto owners
06-26-2006, 02:33 AM
#131
I'm really committed to delivering my kit to the Auto/4-port owners as well! It is just a matter of time. One of my main barriers locally is finding one to do it on. I am even considering selling my 6-port and getting a 4 port specifically for this! Oh well - I'm leaving my day job to concentrate on this Hymee stuff, so things might go quicker from now on!
Cheers,
Hymee.
Cheers,
Hymee.
06-26-2006, 08:58 PM
#132
'03 Dodge Viper
Join Date: Mar 2006
Location: University of Maryland
Posts: 842
Likes: 0
Received 2 Likes
on
2 Posts
Oh nice. Well you know what that means? If you relase this kit it a timely manner, I'll buy a hymee exhaust instead of a borla to help you support your new day job 
06-27-2006, 07:37 AM
#135
Registered
there were a couple of volunteers providing their ATs for Hymee to test...
how much $$$ would be needed to fly from down under to US to make this happen - would there be enough sponsors reading this thread ?
how much $$$ would be needed to fly from down under to US to make this happen - would there be enough sponsors reading this thread ?
06-27-2006, 04:00 PM
#136
Bummed, but bring on OU!
Originally Posted by Marx8nka
there were a couple of volunteers providing their ATs for Hymee to test...
how much $$$ would be needed to fly from down under to US to make this happen - would there be enough sponsors reading this thread ?
how much $$$ would be needed to fly from down under to US to make this happen - would there be enough sponsors reading this thread ?
06-27-2006, 05:36 PM
#137
Shakezula, the Mic Rula
Join Date: Jul 2004
Location: Richmond, VA
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by therm8
^___ That would very much depend on the price that the kit will be sold at. Rumors put it way too high, but those are just rumors, and I won't spread them here.
07-23-2006, 12:46 PM
#139
'03 Dodge Viper
Join Date: Mar 2006
Location: University of Maryland
Posts: 842
Likes: 0
Received 2 Likes
on
2 Posts
Awhile ago I talked about ways we could help Hymee get this kit out. I don't know about all of you, but I'm in the US, and I don't have a vast amount of technical knowledge. Shipping cars overseas or doing R&D over here are both expensive. It seems like there isn't really any way to help Hymee out, but there IS.
I know it may sound obvious, but buying Hymee products helps out. Money can help speed up R&D, and helps make sure Hymee isn't on the street begging for change when he could be developing the kit :D
So I'm going to buy a Hymee exhaust. If you all really want to make a difference with this kit, buy a Hymee product! Besides, the exhaust sounds great.
If you want something done...do something about it!
www.performancedesign.com.au
I know it may sound obvious, but buying Hymee products helps out. Money can help speed up R&D, and helps make sure Hymee isn't on the street begging for change when he could be developing the kit :D
So I'm going to buy a Hymee exhaust. If you all really want to make a difference with this kit, buy a Hymee product! Besides, the exhaust sounds great.
If you want something done...do something about it!
www.performancedesign.com.au
07-24-2006, 06:16 AM
#140
I don't buy Kool-Aid
I'm holding out. Till I see something. Then I'll go ***** out and buy all his ****. I have ca$h. Its just that I dont want to mix an match parts like I did at first. But thats just me.
07-24-2006, 07:30 AM
#141
Registered User
Join Date: Feb 2006
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hymee
Hi all,
I think you will all be pleased to know that following our sucessful work to date with twin-screw supercharging a 6-port RX-8 and our very sucessful work with engine management, we at Performance Design Australia (the home of Hymee Enhanced) will be developing a version of the supercharger kit for the 4-port renesis engine.
This will be a real godsend for the auto owners out there, and the 5-speed manual ones in other parts of the world.
I think you will all be pleased to know that following our sucessful work to date with twin-screw supercharging a 6-port RX-8 and our very sucessful work with engine management, we at Performance Design Australia (the home of Hymee Enhanced) will be developing a version of the supercharger kit for the 4-port renesis engine.
This will be a real godsend for the auto owners out there, and the 5-speed manual ones in other parts of the world.
Originally Posted by hymee
I'm really committed to delivering my kit to the Auto/4-port owners as well! It is just a matter of time. One of my main barriers locally is finding one to do it on.
07-24-2006, 09:30 PM
#142
Its all about Style...
Join Date: May 2006
Location: South of Boston, MA
Posts: 3,337
Likes: 0
Received 0 Likes
on
0 Posts
I want this kit to come out like yesterday.!!!
Well I just finished reading 10 pages of post's about this and I am excited and discouraged. Excited because I hear SC is awsome in a Rotary and I've heard from several friends that SC is more reliable (could be wrong but again what I have heard) than turbo. Discouraged because they have yet to find a A/T test subject.
Only solution I personaly can think of is.. kidnap hymee bring 'em to CA lock 'em up in a shop with someone's Rx8 A/T from our board and let 'em out once it is done. Over the top maybe but I'd love this kit to be out sooner rather than later hehe.. Just so I can start saving $$$ for it.
Please keep us updated though.
Well I just finished reading 10 pages of post's about this and I am excited and discouraged. Excited because I hear SC is awsome in a Rotary and I've heard from several friends that SC is more reliable (could be wrong but again what I have heard) than turbo. Discouraged because they have yet to find a A/T test subject.
Only solution I personaly can think of is.. kidnap hymee bring 'em to CA lock 'em up in a shop with someone's Rx8 A/T from our board and let 'em out once it is done. Over the top maybe but I'd love this kit to be out sooner rather than later hehe.. Just so I can start saving $$$ for it.
Please keep us updated though.
07-24-2006, 09:39 PM
#143
Well, our first test subject will be a 4-port motor on the engine dyno. I guess that helps?
Just something worth mentioning, cause I haven't made much of an announcement, but all this stuff will move quicker now that I have left my full time employment to chase this dream. I have a lot of passion behind this!
Cheers,
Hymee.
Just something worth mentioning, cause I haven't made much of an announcement, but all this stuff will move quicker now that I have left my full time employment to chase this dream. I have a lot of passion behind this!
Cheers,
Hymee.
07-25-2006, 09:15 PM
#145
Originally Posted by Hymee
Well, our first test subject will be a 4-port motor on the engine dyno. I guess that helps?
Just something worth mentioning, cause I haven't made much of an announcement, but all this stuff will move quicker now that I have left my full time employment to chase this dream. I have a lot of passion behind this!
Cheers,
Hymee.
Just something worth mentioning, cause I haven't made much of an announcement, but all this stuff will move quicker now that I have left my full time employment to chase this dream. I have a lot of passion behind this!
Cheers,
Hymee.
07-25-2006, 09:21 PM
#146
Its all about Style...
Join Date: May 2006
Location: South of Boston, MA
Posts: 3,337
Likes: 0
Received 0 Likes
on
0 Posts
Stupid question which I dont want a stupid answer to hehe..
But how long after the development is done will it take to get this to market?
Just wanna know so I know what to make santa.. erm I mean ask santa.. for Christmas/birthday for the next several years hehehe..
Again thanks Hymee for developing this.
But how long after the development is done will it take to get this to market?
Just wanna know so I know what to make santa.. erm I mean ask santa.. for Christmas/birthday for the next several years hehehe..
Again thanks Hymee for developing this.
07-29-2006, 12:07 AM
#147
'03 Dodge Viper
Join Date: Mar 2006
Location: University of Maryland
Posts: 842
Likes: 0
Received 2 Likes
on
2 Posts
I've thought up a good question. What sort of setup would be ideal for the car before installing this kit? I know you want it to be able to turn anyone's 8 into a tourque monster, but will any mods get in the way of the installation of the kit? ie: certain intakes, etc.
07-30-2006, 10:55 AM
#149
Registered User
Join Date: Jun 2004
Location: Houston, TX
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SlayerRX8
I've thought up a good question. What sort of setup would be ideal for the car before installing this kit? I know you want it to be able to turn anyone's 8 into a tourque monster, but will any mods get in the way of the installation of the kit? ie: certain intakes, etc.