Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

12V outlet

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-05-2009 | 11:07 PM
  #1  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
12V outlet

I know this isnt serious but the outlet in the center console (the one inside the sliding arm rest) in my 8 isnt working is there any ideas out there how this can be fixed or what it could be?? I would really appreciate it thank you
Old 01-05-2009 | 11:10 PM
  #2  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
check your fuses first off!!! make sure there isn't a penny in the hole(trust me i've seen it) if all the above is good prob time to take it apart and check the wires are tight!!! My guess is probably a fuse
Old 01-05-2009 | 11:10 PM
  #3  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,719
Likes: 338
From: Smallville
Check the fuse.....
Old 01-05-2009 | 11:18 PM
  #4  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
if you find a penny make sure not to lick it while it's still in the socket.
Old 01-05-2009 | 11:20 PM
  #5  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,786
Likes: 455
From: San Antonio, Texas
Fuses first. Has anyone added an additional socket to their 8?
Old 01-05-2009 | 11:22 PM
  #6  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
I remember checking all the fuses i went on a fuse hunt a couple days ago
since i bought the car it hasnt worked, so how can i get to the wires?
Old 01-05-2009 | 11:23 PM
  #7  
laythor's Avatar
I zoom therefore I am.
 
Joined: Mar 2007
Posts: 4,919
Likes: 12
From: San Jose, CA
you can take off the center area starting at the shifter, then taking out the ash tray, then working back... the whole unit can be removed. Use a volt meter and keep tracing forward from the socket till you find power.
Old 01-05-2009 | 11:27 PM
  #8  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
yeah i can do the area of the shifter but working back is where i would have trouble
guess im scared im ripping something off lol, can anyone tell me or show me a diagram how to remove the center going back?
Old 01-05-2009 | 11:31 PM
  #9  
dannobre's Avatar
Modulated Moderator
iTrader: (3)
 
Joined: Feb 2004
Posts: 13,719
Likes: 338
From: Smallville
You can actually remove the socket without removing the console...look around it..there is a little gap at the bottom...pop it forward and the plug comes out
Old 01-05-2009 | 11:38 PM
  #10  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
Is it really that simple :D! if it is i will try it!
Old 01-06-2009 | 01:00 PM
  #11  
alz0rz's Avatar
hakuna matata!
iTrader: (41)
 
Joined: Aug 2007
Posts: 6,002
Likes: 3
From: NYC
Originally Posted by Cvzrx8
Is it really that simple :D! if it is i will try it!
yes. the socket molding pops out.
Old 01-06-2009 | 01:29 PM
  #12  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
yeah the socked just pops out get a DMM and check voltage at the socket and make sure it's there if not power at the socket you need to work your way back to ur power source!
Old 01-06-2009 | 07:41 PM
  #13  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
Thank you soo much everyone! You guys wont believe this lol i was shocked
when i saw that the plug wasnt connected to anything so i just conected it and it worked i dont know why it was disconnected, i bought the car like that so i guess i'll never know, thank you so much for your help Special thanks to dannobre i didnt know there was a tab there lol Everyone was a big help for my small issue
Old 01-06-2009 | 07:47 PM
  #14  
ShellDude's Avatar
weeeeeeeeee
iTrader: (12)
 
Joined: Jun 2008
Posts: 4,200
Likes: 229
From: Outside Philadelphia
someone before you probably popped it off to see what they could see and inadvertantly disconnected it.
Old 01-06-2009 | 08:10 PM
  #15  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
Yeah could be lol someone more curious than me lol
Old 01-06-2009 | 09:48 PM
  #16  
Tim Tim Tim's Avatar
auto suckkssssss
 
Joined: Oct 2007
Posts: 397
Likes: 0
From: Sandy, Utah
hey i dont have an outlet there.. no fair
Old 01-06-2009 | 11:51 PM
  #17  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
tim tim are you serious?? What year do you have?? N model?? I thought something like that would come in every 8 lol
Old 01-07-2009 | 04:54 PM
  #18  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
yeah i also thought they all had one
Old 01-07-2009 | 05:04 PM
  #19  
ShellDude's Avatar
weeeeeeeeee
iTrader: (12)
 
Joined: Jun 2008
Posts: 4,200
Likes: 229
From: Outside Philadelphia
If he doesn't have an outlet then what exactly is there?
Old 01-07-2009 | 05:24 PM
  #20  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
yeah tim what exactly do you have there just nothing? I have never seen an 8 without one!
Old 01-08-2009 | 08:07 AM
  #21  
Cvzrx8's Avatar
Thread Starter
Registered
 
Joined: Aug 2008
Posts: 162
Likes: 0
From: Mesquite, TX
This is interesting lol, I wonder if it's just a hole there or like blank, or 4 sum odd reason did mazda mess up on something so little??? Or tim were you just playing?? Idk it seems really wierd that your 8 doesn't have that plug
Old 01-09-2009 | 12:07 PM
  #22  
Tim Tim Tim's Avatar
auto suckkssssss
 
Joined: Oct 2007
Posts: 397
Likes: 0
From: Sandy, Utah
inside the armrest where the cupholders are???? I have a cig lighter in front of the shifter under that little door thing but thats the only thing I have. I Guess that could be what your refering to and im just retarded haha, wouldnt be the first time. its an 04 grand touring
Old 01-09-2009 | 12:13 PM
  #23  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,284
Likes: 175
From: A Pacific Island.
Tim, Tim, Tim - slide cupholder lid open, then LIFT!

Voila! second secret compartment, with 12 volt outlet!

S
Old 01-09-2009 | 04:12 PM
  #24  
04RX8man's Avatar
Rotary Powered Countryboy
 
Joined: Feb 2007
Posts: 4,811
Likes: 1
From: Pittsburgh
^exactly...haha he prob never knew that the thing Opened up when slid back haha i didn't know mine did that for like 2 weeks until i accidentially bumped it and thought i broke it
Old 01-09-2009 | 06:07 PM
  #25  
Tim Tim Tim's Avatar
auto suckkssssss
 
Joined: Oct 2007
Posts: 397
Likes: 0
From: Sandy, Utah
im going to check on this now. just got back on to read this!!!


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:22 AM.