Brettus

iTrader: (2)

OK , so I have an AEM ugeo AFR guage that I bought second hand . Problem is the the clever person that uninstalled it cut off the plug that plugs into the sensor wire . I have 36 possible combinations .
If anyone has recently bought this guage but not installed it yet , could they look at the plug wires and see which colours match up to which .
thanks
Brett

atl8

iTrader: (1)

I have one that's sitting here, not yet installed. But I'm not clear on what your asking. How about pictures of what you have?

Brettus

iTrader: (2)

Here is where it is cut - there are black,red, white,green,brown and orange wires



Those wires need to connect to this plug - sorry don't have the colours as it is installed under my car atm.


I need to know what colours go to which pins on the plug . I think i will end up soldering them on as i can't get hold of another plug .
Cheers

chickenwafer

iTrader: (9)

So it's the plug from the actual Bosch AFR sensor that goes into the back of the gauge that is cut, correct?

Shouldn't it just match up color wise?

If not, Let me see if I can find my instruction booklet, otherwise I can pull it apart tomorrow.

Brettus

iTrader: (2)

yes that's the one - there are only 4 wires on the actual sensor plug though , with 6 going to the guage .
Have checked the install instructions to no avail ....
cheers

atl8

iTrader: (1)

if you where to plug in the mated connector to the plug you posted in picture #2, the colors go from top-down, left to right as...

Top Row - Black -> Brown -> Orange
Bottom - Green -> White -> Red

Or you could just contact AEM and order part number 35-3400

Brettus

iTrader: (2)

Yes - that would be Awesome . I looked for a part no. and could not see where i could get one . Also : Another vendor on here told me I could not order it seperately

PM coming your way .

Brettus

iTrader: (2)

thanks heaps for the info