alternator belt
#1
Registered User
Thread Starter
alternator belt
anyone can help me out here ...i was planning to replace my rx8 2004 model alternator belt. i found out the belt also connected in main pulley of the engine.
how im going to take take this off. i just being careful i have no idea what's the right timing for the main pulley? i dont want my engine blew off.
or there's no any connection in timing ???
how im going to take take this off. i just being careful i have no idea what's the right timing for the main pulley? i dont want my engine blew off.
or there's no any connection in timing ???
#3
Registered Zoom Zoomer
iTrader: (2)
Just screw in the Alternator tensioning screw to release the belt's tension and it should slip off relatively easily. Then when you've replaced it with a new belt screw out the tensioner so there's about 1/2" of belt deflection under strong thumb pressure.
edit: "adjusting bolt C" in Jon's instructions below is the 'tensioner' to which I was referring.
Ol' days there was no tensioner, just a nut and you had to [very carefully] pry on the white metal body of the alternator while tightening the nut, so things have gotten much easier in this regard.
edit: "adjusting bolt C" in Jon's instructions below is the 'tensioner' to which I was referring.
Ol' days there was no tensioner, just a nut and you had to [very carefully] pry on the white metal body of the alternator while tightening the nut, so things have gotten much easier in this regard.
Last edited by Huey52; 11-16-2009 at 11:58 AM.
#6
Registered User
Thread Starter
belt
thanks bro sending me this copy
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM