joseph7131

I had a problem with my visor breaking and falling down where i could hardly see on my way to work this morning.

When i got to work, i kind of got mad and decided to just take the visor off.

The visor has wiring which operates the light on the mirror.

I ripped the wiring from the visor and was going to get the minor issue fixed on my lunch break.

well as soon as i took visor off and tried to lock w my remote key i realized it didnt lock. then i opened car door and tried to hit the lock all buttn and it didnt lock.

so i dumbly locked the doors by hand and closed it.

i went to my car to get something and realized i can no longer open the door w the remote key or physically putting car in slot n turning.

i guess i did something to the car electrical system and i have no way of getting in the car

I need suggestions on how i can get in the key!!
Thanks

joseph7131

err last sentence should read

how i can get the door open

nycgps

iTrader: (1)

when you rip the wires out you probably short something and burned the room fuse ?

joseph7131

prob, i guess im going to have to get it towed and hopefully a non mazda dealership can get the door open some magical way.

jasonrxeight

your keyless entry card has a key inside you just pull it out and you can open the driver side door.

HomicidalApple

iTrader: (3)

re read the first post, it says it wont open when he puts the key in the slot and turns it. he has the flip key with keyless entry. not the one that doesnt use a key

Razz1

That was the drivers door. He never mentioned trying the passenger door with a key.