Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Clear Corners Troubleshooting

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-25-2008 | 10:32 AM
  #1  
cpo32's Avatar
Thread Starter
Registered
iTrader: (4)
 
Joined: Apr 2006
Posts: 53
Likes: 0
From: New Jersey
Clear Corners Troubleshooting

So I finally got around to purchasing a set of clear corners. I figured I'd do it right so I got a pair of Stealth Bulbs from RX8Strakes. I took the reflectors out and everything seemed to be going very easily. When I put the new bulbs in and put the clear corners on, I tested it out with my blinkers and nothing happened. No light. So I figured I had bad bulbs. Then I put the original bulbs back in, no light again. Then I attached the new wiring harness that came with the clear corners in replace of the old ones. Again, no light. Any ideas as to what could be going wrong. I really don't want to get a ticket for malfunctioning side marker lights
Old 05-25-2008 | 10:52 AM
  #2  
Shifty Devil's Avatar
Registered
 
Joined: Aug 2005
Posts: 222
Likes: 0
From: Champaign, IL
First, check the fuse for the circuit.
Second, I haven't had my lamps out but they might require a ground connection through the mounting point instead of a wire. If so, you should be trying them out mounted on the car and not dangling in the air.
Old 05-25-2008 | 11:04 AM
  #3  
Mazurfer's Avatar
Surf Hard, Drive Hard
 
Joined: Feb 2007
Posts: 7,840
Likes: 12
From: Indialantic, Florida
This is gonna seem stupid, but you know those don't work off the blinkers right?
Those side markers only work if you have the lights on.
If still no worky, then check the fuse and see if you blew that fuse.

It's not the ground in anyway....it doesn't depend on any ground off the housing on the side markers....you can have them dangling and check them if you like.

Last edited by Mazurfer; 05-25-2008 at 11:09 AM.
Old 05-25-2008 | 12:27 PM
  #4  
BigWillieStyle's Avatar
Che is my BITCH!!!
iTrader: (1)
 
Joined: Nov 2007
Posts: 109
Likes: 0
From: New Albany, OH
LMAO!! Sorry, but I can't help it!! LMAO!!
Old 05-25-2008 | 12:34 PM
  #5  
Easy_E1's Avatar
Registered
iTrader: (2)
 
Joined: Sep 2005
Posts: 7,675
Likes: 5
From: Bellevue WA
Oh lord!
It gives me a warm fuzzy feeling to know that this forum is helping the noobs learn about there cars.
Old 05-25-2008 | 01:31 PM
  #6  
lilring's Avatar
Finally a MT
iTrader: (11)
 
Joined: Jun 2007
Posts: 1,276
Likes: 0
From: Nashville, TN
hey, if you find out what is wrong. please post up and let me know. i have the same problems with mine.. i have the rx8strakes.com side markers with the led bulbs and they dont work..
Old 05-25-2008 | 01:50 PM
  #7  
Rems31's Avatar
Registered User
 
Joined: Sep 2006
Posts: 2,080
Likes: 3
From: Mississauga, ON
Originally Posted by Mazurfer
This is gonna seem stupid, but you know those don't work off the blinkers right?
Those side markers only work if you have the lights on.
If still no worky, then check the fuse and see if you blew that fuse.

It's not the ground in anyway....it doesn't depend on any ground off the housing on the side markers....you can have them dangling and check them if you like.
Mine blink when I keep turning my lights on and off...but I can never make it only blink on one side at a time
Old 05-25-2008 | 04:36 PM
  #8  
RXwizard's Avatar
RXwizard
 
Joined: Apr 2008
Posts: 4
Likes: 0
Funny stuff. Yeah, the side-markers are just that. They're not supposed to blink. I thought the same thing too when I changed out my clear corners the first time. Figured it out after about 1/2 a sec though.
Old 05-25-2008 | 04:58 PM
  #9  
digitalSniperX1's Avatar
Registered User
 
Joined: Mar 2008
Posts: 167
Likes: 1
From: Oviedo, FL
Can anybody tell me where the "how to vacuum an RX-8" and "how to operate an RX-8 trunk lid" forums are located?

Honestly, the correct answer to the question about side marker lights is "who gives a $hit" or....nevermind
Old 05-25-2008 | 05:01 PM
  #10  
Spinning Sushi's Avatar
I <3 Sushi
iTrader: (21)
 
Joined: Aug 2006
Posts: 3,967
Likes: 4
From: SoCal
OoOOOo... My clear corners blink when I hit the turn signal.
http://www.youtube.com/watch?v=er5pIQKFAMA
Old 05-25-2008 | 10:45 PM
  #11  
HockeyRX-8's Avatar
TNC
iTrader: (1)
 
Joined: Feb 2008
Posts: 3,858
Likes: 0
From: Shaolin, NY
Originally Posted by Renesis SE3P
OoOOOo... My clear corners blink when I hit the turn signal.
http://www.youtube.com/watch?v=er5pIQKFAMA
That's really cool.
Old 05-25-2008 | 11:44 PM
  #12  
cpo32's Avatar
Thread Starter
Registered
iTrader: (4)
 
Joined: Apr 2006
Posts: 53
Likes: 0
From: New Jersey
Good call on the fuse. I changed it out today and everything worked fine. I'm just wondering how long my side markers haven't been working for
Old 05-26-2008 | 09:47 AM
  #13  
Ericok's Avatar
Rotary Wanker
 
Joined: Sep 2005
Posts: 413
Likes: 1
From: Washington, DC
Clear corners come with a wiring harness?
Old 05-26-2008 | 12:16 PM
  #14  
cpo32's Avatar
Thread Starter
Registered
iTrader: (4)
 
Joined: Apr 2006
Posts: 53
Likes: 0
From: New Jersey
Mine did...I got them from Japan Parts as part of the Group Buy a couple of weeks ago
Old 05-26-2008 | 12:48 PM
  #15  
Greenblurr93's Avatar
Sotally Tober
iTrader: (1)
 
Joined: Jan 2008
Posts: 957
Likes: 1
From: The Sun
they come with a little pigtail that you dont need to use...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
06-14-2022 09:32 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 05:57 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 02:53 PM
GK1707
RX-8 Parts For Sale/Wanted
0
09-27-2015 08:33 PM
Stubbs
Series I Wheels, Tires, Brakes & Suspension
0
09-27-2015 05:06 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 09:21 PM.