DSC/ABS Malfunctioning after jump start
#1
Registered
Thread Starter
Join Date: Jul 2003
Location: Fredericksburg, VA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
DSC/ABS Malfunctioning after jump start
So my wife killed the battery in the 8 by leaving the map light on, so I had to hook up the battery charger to get it started.
After firing up the car though, the dsc is completely off. I've tried resetting the ECU but no dice. Checked all the fuses and they are all good. Anyone see this problem before? it's an 05 touring with no mods, 42k on the odo.
After firing up the car though, the dsc is completely off. I've tried resetting the ECU but no dice. Checked all the fuses and they are all good. Anyone see this problem before? it's an 05 touring with no mods, 42k on the odo.
#3
Registered User
Join Date: Oct 2009
Location: Karachi, Pakistan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
You need to recalibrate the steering. If i remember correctly, you need to turn the steering wheel all the way to the left, and then all the way to the right. then turn off your car, and turn it back on. DSC and Traction Control lights should disappear..
check your owners manual for more details.
check your owners manual for more details.
#4
Registered
Thread Starter
Join Date: Jul 2003
Location: Fredericksburg, VA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the quick replies guys. I didn't know there was a DSC reset procedure - I"m used to the no frills electronics of my RX7 LOL. I will do that today that must be what it is.
Thread
Thread Starter
Forum
Replies
Last Post