Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Dyno

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-01-2005 | 08:32 PM
  #1  
cgseanp's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 86
Likes: 0
Dyno

I am taking my car in tomorrow to the dyno shop in san diego. i have never had any car dynoed before, is there anything I need to know before i go? i dont want to look like an idiot.. what gear do they do the dyno runs in?

I am going with my friend who just bought a 92 plymouth laser turbo.. i hope my car puts down more power than his! his car only has a 3 inch exhaust..

oh and its a dynojet and it costs 90$ for only 2 runs.
Old 12-02-2005 | 06:06 AM
  #2  
Go48's Avatar
Registered
 
Joined: Jul 2004
Posts: 2,598
Likes: 2
From: Fayetteville, PA
Good heavens, another my horsepower is bigger than your's thread.
Old 12-02-2005 | 10:06 AM
  #3  
cgseanp's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 86
Likes: 0
Originally Posted by Go48
Good heavens, another my horsepower is bigger than your's thread.
nooo nooo nothing like that! I'm just curious to see how much hp my car is putting to the wheels and i figured some of you guys might be curious as well so we could compare since my car is completely stock with 30k miles... no braggging! well maybe between my friend with the laser, but thats it.. and he has a s/c celica GTS putting down over 220 to the wheels, so I wont have much to brag about no matter how much HP i have.

oh well, ill tell everyone how it goes.

One more quick question. How much do the stock 18s weigh? Do they play a small role in our cars not putting down as much HP as one would think they should?

thanks!

Last edited by cgseanp; 12-02-2005 at 10:37 AM.
Old 12-02-2005 | 10:39 AM
  #4  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
Do you have Traction Control? Before you dyno, push and hold the DSC OFF button....hold it for 10 seconds - or until you see a little yellow warning symbol in the center of the Tach area.

Old 12-02-2005 | 10:43 AM
  #5  
Mugatu's Avatar
Even My Dog Searches
iTrader: (1)
 
Joined: Jul 2004
Posts: 2,664
Likes: 1
From: NY
be prepared to be disappointed.....

odds are you're going to get ~180HP at the wheels....like everyone else who has done a dyno test.
Old 12-02-2005 | 10:58 AM
  #6  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
Originally Posted by Mugatu
be prepared to be disappointed.....

odds are you're going to get ~180HP at the wheels....like everyone else who has done a dyno test.
...except that ONE guy who got 206. :-D
Old 12-02-2005 | 11:17 AM
  #7  
cgseanp's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 86
Likes: 0
Originally Posted by Mugatu
be prepared to be disappointed.....

odds are you're going to get ~180HP at the wheels....like everyone else who has done a dyno test.
I dont think I will get dissapointed.. I dont really care how much it puts down, unless its way less than the average.. this is the fastest car I have owned, and I am happy with it.
Old 12-02-2005 | 11:19 AM
  #8  
cgseanp's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 86
Likes: 0
Originally Posted by dmp
Do you have Traction Control? Before you dyno, push and hold the DSC OFF button....hold it for 10 seconds - or until you see a little yellow warning symbol in the center of the Tach area.

thanks for the help.. how do I know what gear to do the dyno runs in? I'm sure the shop will know.. I think I read on here it is 5th? how do you figure out what gear to use?

thanks again
Old 12-02-2005 | 11:24 AM
  #9  
dmp's Avatar
dmp
RX8 and a Truk....
 
Joined: Nov 2004
Posts: 4,658
Likes: 7
From: OKC
Originally Posted by cgseanp
thanks for the help.. how do I know what gear to do the dyno runs in? I'm sure the shop will know.. I think I read on here it is 5th? how do you figure out what gear to use?

thanks again

Ideal is do the runs in the gear closest to a 1:1 ratio - or 5th gear for our cars. Here are some pics and vids from a dyno day a few of us did last year. May give you a good idea of the kinds of things to expect.


https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/pics-vids-dyno-day-53949/

Post-up the results!

Darin
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
02-27-2020 09:39 AM
05rx8mazda
RX-8 Parts For Sale/Wanted
18
11-28-2015 10:42 AM
BERG
RX-8 Parts For Sale/Wanted
8
10-08-2015 10:28 PM
ErwinN
Series I Tech Garage
1
09-23-2015 10:29 PM
The Lone Ranger
SE For Sale/Wanted
0
08-31-2015 02:48 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:19 PM.