Spin9k

Does anyone have a good closeup pic of a MT6 ECU circuit board? I'd like to know if there are physical layout differences between Auto & manual ECU versions.

Thanks.

zoom44

yes hmm some where. let me check thru my emails as i have emailed them a time or two. nice haveing gmail with so much storage space.

zoom44

here from a 2004 6mt

zoom44

the later versions have a higher capacity flash memory- so configuration may be different. they are all running the Renasas Super H processor etc. There shouldnt be any difference in configuration from MT to AT from same MY since the AT functions are handled by the Transmission Control Module CAN module

Spin9k

OK, here's the auto version I have. Looks like 2 chips are missing from the AT version here. Hummmmm....?

Missing IC840 and IC705 (w/likely marking SPF0001 SK4321 - this looks like FLASH memory) if there is a schematic somewhere out there.

Also I see connector differences. The MT has an additional middle connector. The circuit board number is the same, so perhaps they depopulated some chips and less pinouts on the connectors.

Nemesis8

iTrader: (3)

What 'ya up to Spin?

Spin9k

Takin 'part old ECUs just for the hell of it cause they're so cheap on ebay. It's so phugng cold here this is all I can do, can't even touch my car.

But really Im looking for a way to have a spare ECU for use with a RB/SC upgrade flash version.

uae_rx8

HI THERE
i have an RX8 2005 having problem from many years and it still couldn't solve it my car cranks but it does not start took it to many local auto repair shops but they couldn't figure it out. last comment from the mechanic was that the injectors are not working and said there may be problem from the ECU . can anyone help me out with this on how can i solve this issue
Had installed new plugs and and fuel is good it is getting to the engine but the injectors are not spraying fuel. the car was running when bought but as i was driving it went dead on its own and after that it just cranks but not starts. also here in uae they dont know how to work on these cars or engines so thats why i am trying to fix it my self