Filling transmission fluid through shifter?
#26
I took apart the center console and shifter today to perform a fluid change. The boot was hard to get off at first. I spent half an hour with paper clips and flat head screw drivers trying to remove the plastic clips on two of the nuts. I finally grabbed two small needle nose pliers, unlocked the clips, and yanked it out.
Getting the boot itself off the shifter was a pain. The instructions said to "gently twist and pry off", but that didn't work at all. There was some sort of strong adhesive on it. It was easy to get off once I got the idea of pulling the whole boot plate above the shifter and flipping the boot inside out so I can grab it from the bottom and yank it up.
The rest was a breeze.
Unfortunately, I found out that I was missing a 24mm socket, so I couldn't even drain the fluid, let alone fill it from the shifter .
Getting the boot itself off the shifter was a pain. The instructions said to "gently twist and pry off", but that didn't work at all. There was some sort of strong adhesive on it. It was easy to get off once I got the idea of pulling the whole boot plate above the shifter and flipping the boot inside out so I can grab it from the bottom and yank it up.
The rest was a breeze.
Unfortunately, I found out that I was missing a 24mm socket, so I couldn't even drain the fluid, let alone fill it from the shifter .
#27
Huge hole is huge
Good to know you can got through the shifter! That will be the way I do it soon *hit 20k miles...about time for that lovely 30k changes...might do it early when it warms up.*
#30
Registered Zoom Zoomer
iTrader: (2)
It's counter-intuitive, but the "just yank straight up on the shifter boot" method works AOK. I've not broken a clip.
I took apart the center console and shifter today to perform a fluid change. The boot was hard to get off at first. I spent half an hour with paper clips and flat head screw drivers trying to remove the plastic clips on two of the nuts. I finally grabbed two small needle nose pliers, unlocked the clips, and yanked it out.
Getting the boot itself off the shifter was a pain. The instructions said to "gently twist and pry off", but that didn't work at all. There was some sort of strong adhesive on it. It was easy to get off once I got the idea of pulling the whole boot plate above the shifter and flipping the boot inside out so I can grab it from the bottom and yank it up.
The rest was a breeze.
Unfortunately, I found out that I was missing a 24mm socket, so I couldn't even drain the fluid, let alone fill it from the shifter .
Getting the boot itself off the shifter was a pain. The instructions said to "gently twist and pry off", but that didn't work at all. There was some sort of strong adhesive on it. It was easy to get off once I got the idea of pulling the whole boot plate above the shifter and flipping the boot inside out so I can grab it from the bottom and yank it up.
The rest was a breeze.
Unfortunately, I found out that I was missing a 24mm socket, so I couldn't even drain the fluid, let alone fill it from the shifter .
#31
SARX Legend
iTrader: (46)
There is no reason it could be bad, putting it in there is right near where the fill bolt is anyway. Dealer does it this way I believe. Only problem i foresee is some one ******* the rubber grommets under the shift boot. Mine came out very easily however without any issue.
#32
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
The problem I can forsee with this is that it will be difficult to gauge the fluid level in the tranny. I would highly recommend that if you do it this way, remove the fill bolt when you're done to check the fluid level. Going by theoretical pre-measured amounts can be deceiving.
#33
#34
Drummond Built
iTrader: (6)
makes sense... Alright well I need to add I think like .1 or .2 of a quart because I'm not exactly sure if it dripped out but I had used all 2 quarts but not all of it got to the tranny because I used the hand pump. You think filling .1 or .2 quarts through the shifter would be okay and not overfill it?
#35
SARX Legend
iTrader: (46)
Just measure what comes out (funnel and 2 liter bottle) and just put that amount back in. But honestly there is no reason two quarts or less should not come out because the drain is at the absolute bottom of the tranny. Don't over think it, .2 quarts isn't gonna make a difference.
#36
Drummond Built
iTrader: (6)
I'm not saying how much came out I'm saying how much went in. I don't think I got all 2 quarts because I spilled like an ounce and as we all know not all of the tranny fluid that went in the hand pump and through the hoses comes out, some stays in... So I think I put like 1.7 quarts or 1.8 but not enough to drip I don't think. It dripped a little but I'm not sure it was from the fill plug, so how bad could adding .1 or .2 quarts of Redline MT-90 be? I should be fine then right? If I have 1.7 or 1.8 quarts already in and I add .1 or .2 quarts It should add up to 1.9 or 2.0 quarts. I could be okay I assume...???
#37
Grasshopper
iTrader: (1)
I agree with 9krpmrx8... 2qts is fine.
I once had the car up on jack stands and used a 4' level to make sure the car was perfectly level.
Then I filled the tranny through the fill port and after 2qts I was able to feel the fluid at the top of the fill port with my finger.
Since then I knew it would be fine to fill through the shifter with just 2qts.
I once had the car up on jack stands and used a 4' level to make sure the car was perfectly level.
Then I filled the tranny through the fill port and after 2qts I was able to feel the fluid at the top of the fill port with my finger.
Since then I knew it would be fine to fill through the shifter with just 2qts.
#38
SARX Legend
iTrader: (46)
I'm not saying how much came out I'm saying how much went in. I don't think I got all 2 quarts because I spilled like an ounce and as we all know not all of the tranny fluid that went in the hand pump and through the hoses comes out, some stays in... So I think I put like 1.7 quarts or 1.8 but not enough to drip I don't think. It dripped a little but I'm not sure it was from the fill plug, so how bad could adding .1 or .2 quarts of Redline MT-90 be? I should be fine then right? If I have 1.7 or 1.8 quarts already in and I add .1 or .2 quarts It should add up to 1.9 or 2.0 quarts. I could be okay I assume...???
Yeah you should bee fine. Any particular reason you are running Redline?
#41
SARX Legend
iTrader: (46)
Research and you will see many tranny probs due to people using fan boi fluids. But you know what they say about opinions right?
#43
SARX Legend
iTrader: (46)
No doubt it's good stuff. Just hate to see people get it because its all the rave and not because its actually good stuff and they researched it.
In the beginning everyone raved about other popular gear oils and then a bunch of people went out and bought it based on that alone and then were sorry when they had problems.
In the beginning everyone raved about other popular gear oils and then a bunch of people went out and bought it based on that alone and then were sorry when they had problems.
#44
Meh, that's all BS IMO, all I have ever used is factory trans and diff fluids in all my cars, track days and all. Never had an issue when changed regularly.
Research and you will see many tranny probs due to people using fan boi fluids. But you know what they say about opinions right?
Research and you will see many tranny probs due to people using fan boi fluids. But you know what they say about opinions right?
There has been plenty of documented success with Redline products and a growing number of BHR customers using Eneos's transmission fluid as well. Mazda doesn't manufacturer their own lubricants so I imagine a household name makes the factory fill as well.
Let's try and not spread misinformation.
#46
SARX Legend
iTrader: (46)
Oh really? That's a pretty broad statement. The only issues that have been widely discussed on this forum have been problems with Royal Purple in the transmission only. I've experienced those issues myself.
There has been plenty of documented success with Redline products and a growing number of BHR customers using Eneos's transmission fluid as well. Mazda doesn't manufacturer their own lubricants so I imagine a household name makes the factory fill as well.
Let's try and not spread misinformation.
There has been plenty of documented success with Redline products and a growing number of BHR customers using Eneos's transmission fluid as well. Mazda doesn't manufacturer their own lubricants so I imagine a household name makes the factory fill as well.
Let's try and not spread misinformation.
Like I said, we all know what they say about opinions. I'm not spreading misinformation, it's my opinion. Royal purple is not the only one known to have problems. I believe synchromesh is another and that one in (as well as Royal Purple) was raved about in MSP forums at first and was problematic as well for some owners.
#47
Drummond Built
iTrader: (6)
Meh, that's all BS IMO, all I have ever used is factory trans and diff fluids in all my cars, track days and all. Never had an issue when changed regularly.
Research and you will see many tranny probs due to people using fan boi fluids. But you know what they say about opinions right?
Research and you will see many tranny probs due to people using fan boi fluids. But you know what they say about opinions right?
I picked Redline because I DID research, I found as many threads on this forum about Redline fluids and ive also had several locals around here that use Redline as well and love it. I picked what had the best reviews and im content, there is alot of bad information out there but I am pretty smart when it comes to "fan boi" fluids... I have not yet once heard anyone complain about Redline fluids, lots of people use them and love it.
Besides conventional cant beat synthetic in terms of protection so Redline wins hands down ( not to be confused with the problem Royal Purple tranny fluids have, yes they are synthetic but their tranny fluid is GL-5 which has a high sulfur content which can chemically wears down brass synchros)
My 8 is my baby and would never even chance hurting her...
Hell, me and Jon have the exact same fluids for our engine, transmisson and diff oil...
Last edited by WTBRotary!; 03-22-2010 at 11:48 PM.
#48
SARX Legend
iTrader: (46)
I picked Redline because I DID research, I found as many threads on this forum about Redline fluids and ive also had several locals around here that use Redline as well and love it. I picked what had the best reviews and im content, there is alot of bad information out there but I am pretty smart when it comes to "fan boi" fluids... I have not yet once heard anyone complain about Redline fluids, lots of people use them and love it.
Besides conventional cant beat synthetic in terms of protection so Redline wins hands down ( not to be confused with the problem Royal Purple tranny fluids have, yes they are synthetic but their tranny fluid is GL-5 which has a high sulfur content which can chemically wears down brass synchros)
My 8 is my baby and would never even chance hurting her...
Hell, me and Jon have the exact same fluids for our engine, transmisson and diff oil...
Besides conventional cant beat synthetic in terms of protection so Redline wins hands down ( not to be confused with the problem Royal Purple tranny fluids have, yes they are synthetic but their tranny fluid is GL-5 which has a high sulfur content which can chemically wears down brass synchros)
My 8 is my baby and would never even chance hurting her...
Hell, me and Jon have the exact same fluids for our engine, transmisson and diff oil...
Good to hear man. Glad you researched it.
#49
Besides conventional cant beat synthetic in terms of protection so Redline wins hands down ( not to be confused with the problem Royal Purple tranny fluids have, yes they are synthetic but their tranny fluid is GL-5 which has a high sulfur content which can chemically wears down brass synchros)
The GL5's on the market require extreme transmission temperatures before the fluid become acidic enough to eat your syncros. There are plenty of manual transmission safe GL5's out there.
You do realize that Redline makes a GL5 for manual transmissions right?
#50
Drummond Built
iTrader: (6)
Not to meantion I was refering it as a Royal Purple problem, not a GL-5 problem, I should restate what I said...
Then I have a question then, What is causing the transmisson problems having to do with Royal Purple, I thought it was their GL-5 fluid that wore down brass synchros, which is not limited to other fluids out there that are GL-5...
Last edited by WTBRotary!; 03-22-2010 at 11:50 PM.