First modification
#1
First modification
Last week I had the opportunity to buy a 2005 Titanium Grey,MT GT with black leather interior.It has 39 K original miles,always garaged and only a weekend driver.It still smells new.AND the passenger dash is perfect-so far!All and any service records are with it.The only thing apparent are flat spots on the tires with a vibration over 40 mph.Any members with any suggestions to work out these flat spots from sitting for 6 years are much appreciated.Also any suggestions on first mods besides a cooling fan mod or an AFE short shifter will be much appreciated.Cheers
The following users liked this post:
hoonee46 (05-04-2022)
#3
First mod
I finally got around to an ignition update in between rain. Plugs,BHR globally compliant coils 8.5 mm red MSD wires(thanks Charles) 4 new tires with balance and alignment.I also cleaned the throttle body.Now the rain can stop.Next is a SOHN metering kit.
Last edited by jsanderbeck; 05-14-2022 at 06:09 PM. Reason: Update
The following users liked this post:
hoonee46 (05-04-2022)
#4
You'll want to replace those tires. If they sat 6 years i wouldn't expect them to get much better.
This is the route i took on my car after purchasing last year: midpipe, bhr coils, ngk wires + plugs, tein flex z + sporty alignment, ES control arm bushings + alignment specs from flying Miata.
This is the route i took on my car after purchasing last year: midpipe, bhr coils, ngk wires + plugs, tein flex z + sporty alignment, ES control arm bushings + alignment specs from flying Miata.
The following users liked this post:
BigCajun (05-10-2022)
#6
Loving the Bhr coils. They're worth the extra one time cost since the consequences of failure could be catastrophic. Also in the long run you save money, time, and headaches. Compared to the old Mazda revC coils that were on the car, which i thought were fine, bhr coils made a noticeable difference in idle 'strength' and seemingly a little more umph throughout the revs. I'm sure you'll love them as well, install it!
Note - if you plan to premix, Trex site has decent pricing on the idenmitsu 👍🏼
#9
The following users liked this post:
jsanderbeck (02-13-2024)
Thread
Thread Starter
Forum
Replies
Last Post
Richard Paul
Series I Aftermarket Performance Modifications
17
05-14-2010 01:52 PM