Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Floormat Attachment Peg

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-22-2004 | 01:53 AM
  #1  
Doctor Bob's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 90
Likes: 0
From: Huntington Beach, CA
Floormat Attachment Peg

Guys-I did a search but could not find what I was looking for. I think someone else was missing floormat peg? Anyway the driver's floormat gradually gets pushed forward due to no fixation of floormat. Is there a TSB for this-I did not see it listed. Anyone else have peg missing?

Thanks,

Bob
Old 09-22-2004 | 02:09 AM
  #2  
Gord96BRG's Avatar
Registered
 
Joined: Jan 2003
Posts: 2,845
Likes: 1
From: Calgary, AB
It's not a TSB - the peg was provided with your car, and was supposed to be installed by your dealer in the pre-delivery preparation of the car. If you don't have it, it's because your dealer screwed up and took shortcuts on the prep. All you need to do is go back and bitch about the missing peg, and they'll have to find one and install it, no charge.

Regards,
Gordon
Old 09-22-2004 | 02:22 AM
  #3  
robertdot's Avatar
Registered
 
Joined: May 2004
Posts: 1,071
Likes: 0
From: BHM, AL
I wish they had one for the passengers side...
Old 09-22-2004 | 02:24 AM
  #4  
cgrx's Avatar
DRIVEN
 
Joined: Feb 2004
Posts: 2,053
Likes: 0
From: Norcal
check for it in your glove box
Old 09-22-2004 | 02:47 AM
  #5  
brothervoodoo's Avatar
RainMan is Back
 
Joined: May 2003
Posts: 2,650
Likes: 0
From: SF Bay Area
Here's some pictures to show your dealer what you are talking about.

https://www.rx8club.com/showthread.p...t&pagenumber=1
Old 09-22-2004 | 09:32 AM
  #6  
Doctor Bob's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 90
Likes: 0
From: Huntington Beach, CA
Thanks to one and all for your help! I will get this addressed when I go in for oil change.

Bob
Old 09-22-2004 | 10:58 AM
  #7  
Art Hazebrook's Avatar
Registered
 
Joined: Nov 2003
Posts: 81
Likes: 0
From: Paso Robles, CA
Unhappy

I found mine in the glove box and tried to attach it with a small right-angle phillips head screw driver...without luck...what a pain!! It looks like you have to remove the darned seat or have a small drill/driver that can do a 90 degree angle between the handle and the (screw) driver end. Makes me wonder how the dealer does it...
Old 09-22-2004 | 10:32 PM
  #8  
red_rx8_red_int's Avatar
Registered User
 
Joined: Jul 2003
Posts: 911
Likes: 1
From: NC
Originally Posted by Art Hazebrook
I found mine in the glove box and tried to attach it with a small right-angle phillips head screw driver...without luck...what a pain!! It looks like you have to remove the darned seat or have a small drill/driver that can do a 90 degree angle between the handle and the (screw) driver end. Makes me wonder how the dealer does it...

IIRC, it was about a year ago I had the same problem. The thing (screw?) does have a phillips head but it does not screw in, it pops in, just push it down. And, yes I also tried the 90 degree screwdriver, it does not help. I also had a problem with it coming out after a couple of days, after replacing it 2-3 times, I wrapped it with scotch tape, and it had now held in place for about a year.
Old 09-23-2004 | 12:18 AM
  #9  
Art Hazebrook's Avatar
Registered
 
Joined: Nov 2003
Posts: 81
Likes: 0
From: Paso Robles, CA
Originally Posted by red_rx8_red_int
IIRC, it was about a year ago I had the same problem. The thing (screw?) does have a phillips head but it does not screw in, it pops in, just push it down. And, yes I also tried the 90 degree screwdriver, it does not help. I also had a problem with it coming out after a couple of days, after replacing it 2-3 times, I wrapped it with scotch tape, and it had now held in place for about a year.
Great info...I'm off to the garage... :D

Thanks!! Art
Old 09-23-2004 | 07:15 AM
  #10  
I, Claudius's Avatar
moved away
 
Joined: Jan 2004
Posts: 209
Likes: 0
From: undisclosed location
Originally Posted by robertdot
I wish they had one for the passengers side...
Tell me about it. Even though I don't have a passenger all that often, the mat rides up like crazy - I have to readjust it every few days. Maybe it's because my wife is stomping her imaginary brakes over there whenever she rides with me.

Maybe a strip of velcro would help. I'll give it a try and report back.
Old 09-24-2004 | 11:16 AM
  #11  
rotary-blue's Avatar
Registered User
 
Joined: Aug 2004
Posts: 6
Likes: 0
From: Montreal, Canada
I am missing that peg also, but when I went to the dealer they said they are talking to Mazda Canada for a solution to the mats. Either they are lying or they have no clue. Can someone please help me get the missing peg?
Old 09-24-2004 | 12:17 PM
  #12  
Doctor Bob's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 90
Likes: 0
From: Huntington Beach, CA
Originally Posted by rotary-blue
I am missing that peg also, but when I went to the dealer they said they are talking to Mazda Canada for a solution to the mats. Either they are lying or they have no clue. Can someone please help me get the missing peg?
I went to my dealer yesterday for oil change and mentioned missing peg. Service writer asked if I had looked in the car for it. Replied yes but not found. He cheerfully ordered on and I will have installed when in. Go to different dealer or speak to service manager.

Bob
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jgsnake
General Automotive
2
07-30-2023 11:26 AM
nadodave
Series I Trouble Shooting
10
08-28-2019 06:55 AM
p8ntman442
Series I Tech Garage
3
09-22-2015 09:06 PM
chadsta
RX-8 Parts For Sale/Wanted
0
09-21-2015 12:00 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:32 PM.