Front end "clunk"
#28
Registered
iTrader: (25)
Originally Posted by Haze
The shock usually will go bad slowly and there will be oil all over the base of your spring.
As for the other potential causes of clunks, lower ball joint is definitely on the list, but I discounted it because there is no proper reason for a lower ball joint ot be going bad on a car this new, but then there are always manufacturing and engineering defects which seem to be the case. Ball joints are nothing to play around with. If you think you have that problem, get it checked by the dealer as soon as possible.
As for the other potential causes of clunks, lower ball joint is definitely on the list, but I discounted it because there is no proper reason for a lower ball joint ot be going bad on a car this new, but then there are always manufacturing and engineering defects which seem to be the case. Ball joints are nothing to play around with. If you think you have that problem, get it checked by the dealer as soon as possible.
https://www.rx8club.com/series-i-trouble-shooting-95/rx-8-control-arm-ball-joint-problems-recall-67126/
#29
Registered User
Join Date: Nov 2003
Location: in the moment
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Haze
Actually, if he pulled the OEM endlinks completely out of the car while installing the sway bar then it is possible to reinstall the OEM links on the wrong side as well. Both the Racing Beat and OEM endlinks are directional and need to be reinstalled/installed in the appropriate orientation, at least according to Racing Beat and Mazda. It's in the service manual that the endlinks are marked for which side they go on, and that's all that I was trying to get at. Sorry if I was oblique
It is very hard describing a 'clunk' and I am not so sure what I am hearing is the same as everyone else. I continue to investigate the source of what I am hearing and will see that the bolts on my RB sway bars get the proper amount of torque. I also need to take my car in for service in the next two weeks and will ask the dealer to investigate as well.
Craig
#30
Registered User
Thread Starter
Join Date: Dec 2004
Location: Boston
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Just to update....
I brought my 8 in for the clunk, the squeaky seat and, "if possible", the newest recall. They fixed the seat....what a difference that makes (He also said that he's never seen an 8 with a squeaky seat...hmmm).
They were, however, unable to replicate the clunking and the occasional grinding sound I get when cornering. I honestly have no idea how this is possible. The service rep said my car was as tight as a drum. There's really no explanation. It's frustrating but I'm not about to argue with the guy after he says that they took it out three times and didn't notice anything. I guess I'll bring it up again when I get the official 3305g recall notice.
He was also clueless about the recall and said he had no way to flash my car. When I showed him the TSB printout for 3305g he said that it's unfortunate stuff like that gets "leaked out" over the internet. Doesn't really bother me though....I'd rather get this taken care of when the dealer has a little experience with it first.
I brought my 8 in for the clunk, the squeaky seat and, "if possible", the newest recall. They fixed the seat....what a difference that makes (He also said that he's never seen an 8 with a squeaky seat...hmmm).
They were, however, unable to replicate the clunking and the occasional grinding sound I get when cornering. I honestly have no idea how this is possible. The service rep said my car was as tight as a drum. There's really no explanation. It's frustrating but I'm not about to argue with the guy after he says that they took it out three times and didn't notice anything. I guess I'll bring it up again when I get the official 3305g recall notice.
He was also clueless about the recall and said he had no way to flash my car. When I showed him the TSB printout for 3305g he said that it's unfortunate stuff like that gets "leaked out" over the internet. Doesn't really bother me though....I'd rather get this taken care of when the dealer has a little experience with it first.
#31
Greensboro's Finest
Join Date: Jun 2007
Location: Greensboro, NC
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
For the record, I had the clunking in the front sway bar (Drivers' side), had it re-torqued, and everything is fine now. Torque it towards the high end of the recommended spectrum.
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM