Help with screws
#1
Registered
Thread Starter
Join Date: Apr 2005
Location: Union, NJ
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Help with screws
So after I wash my car today, I notice that for some reason, my front undertray is hanging a little low. I take a look and I can see where there used to be screws holding it up. I have no idea where they would have went or how long its been like that, but does anybody have any clue what size screws and washers are used to hold that thing in place. Im not very savy when it comes to stuff like this so be kind.
#3
Registered
Thread Starter
Join Date: Apr 2005
Location: Union, NJ
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Yea, the only other two screws holding the rest of the undertray in place. I can just unscrew em in the parking lot i guess. Thanks bro. I dont know why i was too dumb to think of that.
#4
Registered User
Join Date: Sep 2004
Location: Los Angeles, CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
dude, I have the same problem. I tried looking for them at Pep Boys, Kragen and other auto shops but can't seem to find a good match. I also tried Home Depot but still no luck. Can you do me a favor and let me know if you find some and where you can get them. Am still trying to look for a match and would definitely let you guys know if I find them.
Thanks
Thanks
#5
I did the same thing. Pulled a little too close to a parking curb and sheared them off. I think that's what happened anyway. I didn't find an exact match but was able to find something with the same thread pitch. The screws I used were about an 1/8" longer but was not a problem. The other difference was that the flange or built in washer or whatever you want to call it was a little smaller. Didn't seem to have a problem.
#7
Registered
Originally Posted by RotaryRider36
So after I wash my car today, I notice that for some reason, my front undertray is hanging a little low. I take a look and I can see where there used to be screws holding it up. I have no idea where they would have went or how long its been like that, but does anybody have any clue what size screws and washers are used to hold that thing in place. Im not very savy when it comes to stuff like this so be kind.
My point is, if this is a fairly new car and you hadn't looked carefully in that area before now, the fasteners were probabably not there when you purchased the car. If that's the case, take it back to the dealer and have them install the proper fasteners. I did it myself with speed nuts and screws I picked up at my local hardware store because it was a 2-hour trip to the dealer and back.
#8
Registered User
Join Date: Mar 2005
Location: San Antonio, TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
yep me too
We've only had the car a few weeks and I noticed them missing this past week. Must be a QC problem - I didn't/don't have the spoiler, just 'stick'.
Dealer wants over $4.50 EACH!
Lowes - # 10 self tapping 1", also get some 5/32 fender washers.
They do shine if you are far enough away from teh car to see just underneath - I'll prolly put some black paint or tar on them to hide them.
Derek
Dealer wants over $4.50 EACH!
Lowes - # 10 self tapping 1", also get some 5/32 fender washers.
They do shine if you are far enough away from teh car to see just underneath - I'll prolly put some black paint or tar on them to hide them.
Derek
Thread
Thread Starter
Forum
Replies
Last Post
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM
RAVSPEC
Vendor Classifieds
0
08-05-2015 02:53 PM