Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Hesitation at low RPMs?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-19-2004, 03:47 AM
  #1  
Registered User
Thread Starter
 
2ROTORZ's Avatar
 
Join Date: Aug 2004
Location: New York, USA
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Hesitation at low RPMs?

Sorry of someone posted this before, but I wasn't able to find any other threads with this subject covered.

I was wondering if I am the only one experiencing this issue. When launching the car with a light effort on the gas pedal (which is not that often ) at low RPMs in first gear, I am finding a good amount of hesitation or rather a "dead spot" in the powerband. This tends to happen below 2000 RPMs from a dead stop. Once past that point, all seems to accelerate as I would expect, but this hesitation sometimes feels like the car might stall if I do not get on the gas a bit more.

All of the cars I have had in the past have all been manual transmissions, so it is not a case of me not being able to drive a stick properly. Just interested to know if I am the only one experiencing this, and if not, if anyone out there might be able to help me to understand exactly what is happening mechanically when this occurs.

Dave
2ROTORZ is offline  
Old 09-20-2004, 11:55 AM
  #2  
Registered User
Thread Starter
 
2ROTORZ's Avatar
 
Join Date: Aug 2004
Location: New York, USA
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
I guess I was expecting too much when I thought I could get some info from a community forum like this. I would think at least one person would lend some helpful information, but I guess I should just rely on the dealer for such assistance.

Just would have been better to have some info before I went all the way there to claim an engine problem that I am not even sure IS an engine problem...

Oh well..... Just disappointed I guess, especially when I see what some people take the time to reply to here,such as to attack a guy for starting a ti gray appreciation thread, and things of that nature. When it comes to helping a guy out who has a valid concern (like myself), everyone seems to leave me high and dry.
2ROTORZ is offline  
Old 09-20-2004, 12:34 PM
  #3  
Humpin legs and takin nam
 
guy321's Avatar
 
Join Date: Nov 2003
Location: Clearwater, Fl
Posts: 2,433
Likes: 0
Received 0 Likes on 0 Posts
Well. I guess I'll just have to respond now..

First off, this IS a community of people.. Owners and non-owners alike.. We are people, not your personal database. When you pose a question we are not REQUIRED to answer or acknowledge you..

Usually, people will and will give you good advice. You made your post at 4:47 AM Sunday.. No one was around then.. and If people are like me and click NEW posts then it will be a while before they get to it.

Thanks for attacking every member on the forum just because you didn't get the answer you want in the time frame you want it.. Incidentally, there is a search button.. and I'm certain someone has asked, and had this question answered in the past.

Originally Posted by 2ROTORZ
I guess I was expecting too much when I thought I could get some info from a community forum like this. I would think at least one person would lend some helpful information, but I guess I should just rely on the dealer for such assistance.

Just would have been better to have some info before I went all the way there to claim an engine problem that I am not even sure IS an engine problem...

Oh well..... Just disappointed I guess, especially when I see what some people take the time to reply to here,such as to attack a guy for starting a ti gray appreciation thread, and things of that nature. When it comes to helping a guy out who has a valid concern (like myself), everyone seems to leave me high and dry.

Last edited by guy321; 09-20-2004 at 12:39 PM.
guy321 is offline  
Old 09-20-2004, 12:37 PM
  #4  
Registered User
 
MTCD01's Avatar
 
Join Date: Mar 2004
Location: Northern VA, USA
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
launching the car
...
below 2000 RPMs from a dead stop
This is not "launching". This is a normal start. If you want to minimize the effect you need to either raise the RPM or release the clutch a little more slowly. I don't launch my car at all and typically start off at or just above 2,000 RPMs since this engine is quite a bit short on torque. Below 2,000 RPMs is just not enough to get it going and you are nearly stalling it. Above 2,000 RPMs you can even start off in second gear just like any other car.

Personally I'm not on the site on the weekends and am sometimes too busy to reply...no need to throw a fit (which I'm sure didn't encourage/motivate people to help out).
MTCD01 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RevMeHarder
New Member Forum
6
08-16-2023 06:23 PM
WranglerFan
New Member Forum
4
11-05-2017 09:35 AM
Redheddude222
Series I Trouble Shooting
3
09-14-2015 02:55 PM
DVerdeyen
Series I Trouble Shooting
6
09-13-2015 11:19 AM
tgaffner
New Member Forum
3
09-07-2015 08:49 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Hesitation at low RPMs?



All times are GMT -5. The time now is 10:29 AM.