Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

High Pitched Whine with AEM CAI

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-10-2009 | 03:26 PM
  #1  
EMart11b's Avatar
Thread Starter
Bang Bang
iTrader: (5)
 
Joined: Apr 2009
Posts: 779
Likes: 2
From: Morgantown, WV
High Pitched Whine with AEM CAI

I'll probably get flamed for this but whatever.

I've had my AEM CAI on for a bit now and the high pitched squeel at cruising speed really pisses me off. Is there any way to fix this or is it just a con of an aftermarket intake?
Old 06-10-2009 | 03:33 PM
  #2  
myriadshalaks's Avatar
rot8ing
iTrader: (1)
 
Joined: Feb 2007
Posts: 1,538
Likes: 1
From: merritt island, fl
make sure all the hoses and couplings are as tight as possible. try putting hose clamps on the 3 hoses next to the maf.

there's nothing high pitched about my intake.
Old 06-10-2009 | 03:34 PM
  #3  
EMart11b's Avatar
Thread Starter
Bang Bang
iTrader: (5)
 
Joined: Apr 2009
Posts: 779
Likes: 2
From: Morgantown, WV
Originally Posted by myriadshalaks
make sure all the hoses and couplings are as tight as possible. try putting hose clamps on the 3 hoses next to the maf.
There were only 2 hoses on my 09 AT should I put a hose clamp on the vacuum cap over the third nipple?
Old 06-10-2009 | 04:52 PM
  #4  
DeViLbOi's Avatar
The devil made me do it
iTrader: (1)
 
Joined: Jul 2007
Posts: 3,708
Likes: 2
From: Colorado Springs, CO
yea...Im with Kane...sounds like you have a vacuum leak. But just a really really small one...not enough to cause performance issues. Could even be something stupid like a pin hole in a hose.
Old 06-10-2009 | 04:55 PM
  #5  
EMart11b's Avatar
Thread Starter
Bang Bang
iTrader: (5)
 
Joined: Apr 2009
Posts: 779
Likes: 2
From: Morgantown, WV
Originally Posted by DeViLbOi
yea...Im with Kane...sounds like you have a vacuum leak. But just a really really small one...not enough to cause performance issues. Could even be something stupid like a pin hole in a hose.
I don't think it's the hoses, should I try clamping the tb cap and third nipple cap?
Old 06-10-2009 | 04:57 PM
  #6  
chickenwafer's Avatar
Nope
iTrader: (9)
 
Joined: Jan 2007
Posts: 3,312
Likes: 0
From: Denver
Did you cap the VFAD nipple?
Old 06-10-2009 | 05:33 PM
  #7  
EMart11b's Avatar
Thread Starter
Bang Bang
iTrader: (5)
 
Joined: Apr 2009
Posts: 779
Likes: 2
From: Morgantown, WV
Originally Posted by chickenwafer
Did you cap the VFAD nipple?
Yea, I capped it and the open nipple but I just got a thicker vc for the nipple and I'm gonna throw that on and clamp it. Hopefully that'll do the trick.
Old 06-10-2009 | 06:08 PM
  #8  
JantzenRX-8's Avatar
Registered
iTrader: (9)
 
Joined: Jun 2006
Posts: 1,285
Likes: 0
From: Seattle, WA
I get the same sound from mine. It sounds like a fighter jet getting ready for take off... and i'm fine with that

The pitch is constant for me. It does not fluctuate at different revs.
Old 06-10-2009 | 07:38 PM
  #9  
EMart11b's Avatar
Thread Starter
Bang Bang
iTrader: (5)
 
Joined: Apr 2009
Posts: 779
Likes: 2
From: Morgantown, WV
The vacuum cap I had on the third nipple was a pos, the new one clamped down fixed the problem!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
galognu
Rotary Swaps
138
11-16-2020 05:20 AM
fourwhls
RX-8's For Sale/Wanted
7
02-20-2019 05:16 PM
Sato Tatsuya
Canada For Sale/Wanted
3
10-05-2015 03:09 PM
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
Zube6115
Series I Trouble Shooting
8
09-30-2015 12:57 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: High Pitched Whine with AEM CAI



All times are GMT -5. The time now is 01:15 PM.