how to get the broken maf screw out?
#1
how to get the broken maf screw out?
yes i know i fudged up
the maf screw broke off in half, i didnt even try to overtight it, i was trying to get it back out and it broke...
anyway, i took the tube to some auto place and they said they cant do it and suggest i go visit some machine shop.
question is , is that true ? if yes how much would it cost ? is it even possible to get a small broken piece like maf screw out ?
or i better off just buy some small drill bits and try to drill it out myself ?
the maf screw broke off in half, i didnt even try to overtight it, i was trying to get it back out and it broke...
anyway, i took the tube to some auto place and they said they cant do it and suggest i go visit some machine shop.
question is , is that true ? if yes how much would it cost ? is it even possible to get a small broken piece like maf screw out ?
or i better off just buy some small drill bits and try to drill it out myself ?
#2
rot8ing
iTrader: (1)
how far down is it broken? stock screw or for an intake?
a drill bit is going to have to be crazy small to get in there. i don't think there's even a back out bit that'll fit in there.
maybe a high pressure air hose from underneath.
or, just rip it off and buy a new maf.
how did you break it anyway? too many muscles?
a drill bit is going to have to be crazy small to get in there. i don't think there's even a back out bit that'll fit in there.
maybe a high pressure air hose from underneath.
or, just rip it off and buy a new maf.
how did you break it anyway? too many muscles?
#4
Administrator
iTrader: (7)
how the hell did you do that NY?!
got a picture?
Normally I would say take a drill to it but if I remember correctly, that is a tiny *** screw.
got a picture?
Normally I would say take a drill to it but if I remember correctly, that is a tiny *** screw.
#7
I think Im screwed ![Frown](https://www.rx8club.com/images/smilies/frown.gif)
I got a new hks intake from CRH (just for the hell of it)
the MAF screw was the one that came with Mazdaspeed intake. I totally forgot that its a tiny *** bigger than the original stock intake MAF screw(thats why they give it to you).
I was about to finish the install, MAF was the last step, then I got over excited and tried to force that screw in and .... I was like hmm wait, holy ****, then I tried to back it out but it was too late. the one of the head broke off.![Frown](https://www.rx8club.com/images/smilies/frown.gif)
I took it to a machine shop before, he tried to remove it but then failed, it was too tight, and there is no space there to drill.
so yep, Im fucked![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Original MAF screw on order coming in tomorrow(I lost the original one), Gonna do it the ghetto way ------------------ TAPE THAT **** !!!!
Will post pics up later ... just let me feel sad for a while cuz I screwed my 500+ bux purchase with a tiny *** screw that probably worth less than a buck ...
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
I got a new hks intake from CRH (just for the hell of it)
the MAF screw was the one that came with Mazdaspeed intake. I totally forgot that its a tiny *** bigger than the original stock intake MAF screw(thats why they give it to you).
I was about to finish the install, MAF was the last step, then I got over excited and tried to force that screw in and .... I was like hmm wait, holy ****, then I tried to back it out but it was too late. the one of the head broke off.
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
I took it to a machine shop before, he tried to remove it but then failed, it was too tight, and there is no space there to drill.
so yep, Im fucked
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Original MAF screw on order coming in tomorrow(I lost the original one), Gonna do it the ghetto way ------------------ TAPE THAT **** !!!!
Will post pics up later ... just let me feel sad for a while cuz I screwed my 500+ bux purchase with a tiny *** screw that probably worth less than a buck ...
#8
Administrator
iTrader: (7)
pix!!!
#9
Registered
Join Date: Oct 2008
Location: Montreal,QC
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Pics or it didn't happen!
Wait. On the oem intake (which is what I have) is it the that square piece with a weird tube going into the top of the intake and only has 2 small screws?Or is that the Vfad?
Wait. On the oem intake (which is what I have) is it the that square piece with a weird tube going into the top of the intake and only has 2 small screws?Or is that the Vfad?
#12
Grasshopper
iTrader: (1)
Might sound crazy, but try using a strip of sandpaper over the broken bolt.
Then use your finger to push down and turn counter-clockwise.
The idea is for the sandpaper to (hopefully) have enough grit to latch onto part of the bolt and you'll be able to spin it.
As long as its not too tightly installed.
Then use your finger to push down and turn counter-clockwise.
The idea is for the sandpaper to (hopefully) have enough grit to latch onto part of the bolt and you'll be able to spin it.
As long as its not too tightly installed.
#13
Might sound crazy, but try using a strip of sandpaper over the broken bolt.
Then use your finger to push down and turn counter-clockwise.
The idea is for the sandpaper to (hopefully) have enough grit to latch onto part of the bolt and you'll be able to spin it.
As long as its not too tightly installed.
Then use your finger to push down and turn counter-clockwise.
The idea is for the sandpaper to (hopefully) have enough grit to latch onto part of the bolt and you'll be able to spin it.
As long as its not too tightly installed.
I show it to my father, he said its going to be hard, but its possible to get it out.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
will try his method tomorrow ... *shurgs*
#18
Administrator
iTrader: (7)
I can't believe we don't have pics of this epic failure....
(sorry Ny, couldn't resist...)
(sorry Ny, couldn't resist...)
#21
Administrator
iTrader: (7)
^^^ +1