olddragger

iTrader: (3)

wife liked it! hehe. Thanks man!

2nd radiator is the thing to do guys --exhaust it below the undertray and a small manually operated fan on top of it. I used the seat warmer circuit for it and placed a switch on the console like the seat warmer. It matches my w/m switch.
OD

9krpmrx8

iTrader: (46)

Found this locally, what do you think OD, are the cooler different for oil vs water? I found some differences but it's tube and fin which some lower end radiators are too.

Brettus

iTrader: (2)

still think you should try my idea ..... you must already have the oil coolers to do it and funnily enough not only do they they fit perfectly but you even have the ducting to seal it off . You won't need fans because they are in the air stream - the best location possible .

No-one believes me

9krpmrx8

iTrader: (46)

I believe you bro, I just need to look at fittings, etc.

Brettus

iTrader: (2)

If I recall correctly I just cut the thread off the original oil fittings the tapped them 3/8"bsp (I think) then used BSP fittings with some hydraulic loctite to seal both threads .

jasonrxeight

have you guys thought about motorcycle cooling fans?
they are about size, but freaking loud tho.

olddragger

iTrader: (3)

the tubes look a little small for good volume of circulation and the fins are close together.
it wouldnt be my 1st choice
http://static.summitracing.com/globa...um-g4968_w.jpg
this is mine---very open fined, large tubes with fin inside them to break up the water stream etc.https://www.rx8club.com/attachment.p...1&d=1278459581


https://www.rx8club.com/attachment.p...1&d=1278459795
i no longer have it mounted like this. Just for reference.

rotarygod

That type of cooler is the least efficient of all styles out there.

9krpmrx8

iTrader: (46)

Which? Tube an fin?