I just premixed with Castrol 10w-30 synthetic blend
#26
Boosted Kiwi
iTrader: (2)
The following users liked this post:
Kamal El (10-20-2018)
#27
Registered
The following users liked this post:
Kamal El (10-20-2018)
#30
Registered
The following users liked this post:
Kamal El (10-20-2018)
#31
Boosted Kiwi
iTrader: (2)
Have you read this thread :
https://www.rx7club.com/3rd-generati...-premix-60867/
https://www.rx7club.com/3rd-generati...-premix-60867/
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
The following users liked this post:
RGT84 (10-20-2018)
#32
Registered
#33
Registered
I've since updated my pre-mix to 8oz per fill-up, or roughly 0.5oz of oil to 1 gallon of fuel. No smoke or excessive fuel trimming, so I'll stick with it for now.
As far as the SOHN, it seems to be pumping an effective amount of oil. It injected about 32oz during the first 1,000mi break-in. It will be interesting to see what it does over the next 1,000 miles of normal driving.
As far as the SOHN, it seems to be pumping an effective amount of oil. It injected about 32oz during the first 1,000mi break-in. It will be interesting to see what it does over the next 1,000 miles of normal driving.
The following users liked this post:
Kamal El (10-20-2018)
#34
http://a.co/d/dVl0hsT
http://a.co/d/8UsPsXW
Both: API TC, JASO FC & FD, API EGD
JASO FC = ISO EGC
JASO FD = ISO EGD
https://www.motor-talk.de/forum/akti...hmentId=683876
http://a.co/d/8UsPsXW
Both: API TC, JASO FC & FD, API EGD
JASO FC = ISO EGC
JASO FD = ISO EGD
https://www.motor-talk.de/forum/akti...hmentId=683876
JASO FD = ISO EGD
Got it, Thanks!
#35
what about upper cylinder lube lucas?
#36
Since you guys brought up the sohn adapter, I recall someone on here telling me the sohn adapter leaves some areas of the engine unlubricared. Can you guys elaborate? Something like sohn kills track engines or something for lack of complete lubrication. I was searching for my post and his response but am having a hard time locating it.. I didn't see these replies. I though rx8club wrote me off for flicking the bird
The following users liked this post:
Kamal El (10-21-2018)
#38
Are you kidding me? So the plate doesnt block off any lubrication pathways? I could have sworn it was teamrx8 who told me that.
The following users liked this post:
Kamal El (10-20-2018)
#40
damn
now i have another item on my shopping list...
now i have another item on my shopping list...
#41
what do you guys think about the olddragger mod with the tranny cooler as a secondary radiator? I thought that was genius but i fear the car may run too cold. thoughts?
The following users liked this post:
Kamal El (10-20-2018)
#43
Smoking turbo yay
And centre of the apex seals since there is still no middle injector.
The following users liked this post:
Kamal El (10-21-2018)
Thread
Thread Starter
Forum
Replies
Last Post