Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Ignition Lock Cylinder Replacement

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-08-2012 | 05:14 AM
  #1  
ckachur's Avatar
Thread Starter
Registered
 
Joined: Jan 2007
Posts: 14
Likes: 0
Angry Ignition Lock Cylinder Replacement

So, went out to my car the other day and found someone decided to remove the stereo and try to steal the damn thing. The car has no insurance because it has a dealer plate on it.

they hammered something into the keyhole and f'd the ignition so the key wont turn, I took it to a locksmith and he couldnt crack it, but suggested finding another ignition with key and he could swap the tumblers to fit the key I have.

Does anyone know where I can purchase one? I looked online and found one on ebay but it was for a 05....not sure if thatll work.

the car is a 04 GT manual

any help would be greatly appreciated
Old 10-08-2012 | 08:11 AM
  #2  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 32
From: Planet Earth
were they trying to steal the stock stereo or aftermarket ?

cuz there is almost no point stealing the stock as it will ask you to input a code when it detects a different module, without it, stereo is useless.

even most aftermarket stereo has an option of inputing a code, I have it on mine, and I made some modifcations to the Radio itself so when they pull it without what I did, they will **** the radio up and it's will become completely useless.

why would they wanna **** with ur ignition cylinder when they just want the radio is beyond my imagination ... but small thieves are usually dumb, probably watched too much gone in 60 seconds and thought u just need to turn the thing and the car will move.

Your best is to find another one from a wrecked 04. they are all around, shouldn't be too hard to find. call junk yards up.
Old 10-08-2012 | 08:17 AM
  #3  
200.mph's Avatar
FULLY SEMI AUTOMATIC
iTrader: (9)
 
Joined: Aug 2008
Posts: 5,706
Likes: 2,508
From: BALLS DEEP
i think you would have to get keys for a new tumbler programmed to the car at the dealer but im not positive
Old 10-09-2012 | 06:41 AM
  #4  
ASH8's Avatar
Super Moderator
 
Joined: Apr 2005
Posts: 10,869
Likes: 327
From: Australia
A new OE Mazda Steering Lock and Switch with Keys is not cheap...about $300.

*FEY5-76-29X Steering Lock/Ignition Switch.

*PM me your VIN to confirm exact Switch/lock ..if you want to go new mazda
Old 10-09-2012 | 08:28 PM
  #5  
Sugarfree135's Avatar
Registered
iTrader: (1)
 
Joined: Sep 2012
Posts: 148
Likes: 1
From: Grand junction CO
I had come across quite a few on ebay when I was looking for smart cards for mine. They came with the ignition and the keys so it should basically be plug and play plus a fee from your local locksmith to reprogram your new keys.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ironj221
RX-8 Discussion
35
06-25-2024 01:35 PM
delicious_dallan
New Member Forum
12
01-17-2020 10:17 AM
GrAfiX
Series I Tech Garage
4
08-24-2015 09:08 AM
dbarber
Series I Trouble Shooting
14
07-25-2015 02:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:39 PM.