rz-jacks

So I decided to change the stock coils on my 8 for some LS2 truck coils. I was able to pull some off of ebay for 300$ shipped (set of 8, selling the other four) so 150 for the 4 I need. Additionally I'll be getting this wiring harness. and a set of msd wires and ngk OEM plugs. I'll be posting my progress and hopefully end up with a nice DIY for people who are looking into doing this.

any advice or input is appriciated

SayNoToPistons

iTrader: (8)

Ill take the other four

rz-jacks

sorry, someone already asked for them. I'll let you know if they don't go through with it since I won't be able to ship them till after new years.

Wind Dance

iTrader: (7)

You wont regret it. I've had mine in for awhile.

I8U

iTrader: (1)

Damn who did you buy those off of? I got a set of 4 for $80 NIB...let me know if get stuck, built my kit for just under $275 with everything. I've a wire diagram if you need it.

rz-jacks

ebay. I still have to order the wiring harness, and the msd wires. already have the plugs. Hopefully it'll be straight forward

Spoolin8

iTrader: (2)

Please PM me it

RonM

iTrader: (1)

Subscribed

BigC94

Doin the same project. If you could pm the wiring diagram that would be great. Thanks in advance.

200.mph

iTrader: (9)

+1 you should do a diy

Atilla

iTrader: (1)

nice.

as far as input - BHR might be able to provide some

SayNoToPistons

iTrader: (8)

Where are you getting your MSD wires and specs on them?

MazdaManiac

iTrader: (3)

I think we've provided more than enough input at this point.

rz-jacks

true, I've read almost through all of you msd coil project thread. Pretty interesting stuff. One question tho: do I need to do anything to the dwell times of the coils?

Charles R. Hill

iTrader: (7)

BHR does not have one.

shaunv74

So. When does that patent get on the books...

rxspeed7

what should i set the spark trig output on my microtech lt10s to? falling edge or rising edge? thanks zack

rxspeed7

i know someone has to have a microtech with these coils.

rz-jacks

update: finally got everything I needed and I went ahead and installed everything today. I'll try to post pictures when it get warmer. Overall I didn't notice a lot of difference except that now the power delivery is smooth as opossed to before where the engine kinda hesitated at high rpm's, also my idle is a lot smoother. I just filled her up so I'll report on gas milage as soon as I have a baseline. I did not change the plugs just yet so that might affect the results.

Cheers

rxspeed7

any info on the spark trig output setting for a microtech?

Heavytarget

Any Pics of coil setup?

drifthappens

what did you do for the bracket? and can you shoot me that wiring diagram? (yes, necropost, sorry.)