When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The RX8 never came with a redline or shift light. It should be possible to fab one, however I have never had the cluster out to figure out how to do it.
No, my 2006 rx8 shinka does a shift light when I hit the red line. it's in the middle of the rpm tachometer.
No BEEP? What do you mean no beep?!? There has to be a beep! If there's no beep, then maybe there's no spoon!
Oh the agony, the horror! If I woke up tomorrow and there was no beep I would have nothing to live for anymore. I might as well impale myself with my dipstick.
I doesn't get the beep after 8500 rpm, or seatbelt and lights cautionary.
I tested the cluster by selftest #14, but nothing.
Finally I find the problem, somebody destroyed my buzzer in the cluster.
THANKS JON!
Originally Posted by Jon316G
Simply stop at each output and wait for a second.
Here is a list of all the outputs and what they mean:
1) Buckle switch
4) Door switch
8) TNS relay
12) Speedometer
13) Tachometer
14) Buzzer
16) Fuel-level warning light
18) Ignition key illumination
22) Fuel gauge sender unit
23) Fuel gauge
25) Water temperature gauge
26) Odometer tripmeter, warning and indicator light
28) Oil pressure gauge
31) Key reminder switch
55) Dimmer switch
06-30-2009 | 06:50 PM
