Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

O2 sensor and possibly MAF gone bad

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-08-2014 | 12:01 AM
  #1  
XxChrisxX's Avatar
Thread Starter
Desert Cruiser
 
Joined: Apr 2009
Posts: 72
Likes: 0
From: Palmdale, CA
O2 sensor and possibly MAF gone bad

Hey guys, I recently got a check engine light with P0411 and P0172 indicating im running rich and I have secondary air flow problems. Tech came back and told me my 02 sensor is shot and the MAF should probably be replaced as well. He's asking 600 for the 02 and 300 for the MAF. I just wanted to see what other people have paid for this work and if I was getting ripped off. Any feedback or suggestions is appreciated, thanks.
Old 04-08-2014 | 12:13 AM
  #2  
Arca_ex's Avatar
BECAUSE RACECAR
iTrader: (10)
 
Joined: May 2011
Posts: 1,413
Likes: 8
From: Arizona
I have a known working MAF and front O2 sensor you can have for 200 shipped... came off an 05 with 104k miles.

Those prices are ridiculous. The MAF is especially easy to replace on your own. It is two screws and an electrical connector. The front O2 sensor is a little more difficult to get to but it's still something that can be done in a day even for beginners.
Old 04-08-2014 | 12:25 AM
  #3  
XxChrisxX's Avatar
Thread Starter
Desert Cruiser
 
Joined: Apr 2009
Posts: 72
Likes: 0
From: Palmdale, CA
Thanks. I have cleaned the maf a few times before, I didn't realize they went for so cheap. Wasn't sure if the O2 sensor was out of my league, I don't really have a way of getting it elevated to work on it myself. Suppose I could rent some time at a place to do it.
Old 04-08-2014 | 04:35 AM
  #4  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 32
From: Planet Earth
Get O2 sensor, that's all you need 90% of the time
Old 04-08-2014 | 11:26 AM
  #5  
Jazzmeson's Avatar
Zoom Zoom Boom
iTrader: (5)
 
Joined: Oct 2012
Posts: 477
Likes: 11
From: Los Angeles
If you need a cheap upstream O2 sensor, I got mine for $172 shipped brand new from PartsGeek. I was skeptical at first buying Bosch instead of Denso for about $300, but it works perfect.

Edit: It looks like the prices went up for the Bosch. I see then all going for about $240 now... Perhaps they made a mistake on pricing when I bought mine Lol.

Posted From RX8Club.com Android App

Last edited by Jazzmeson; 04-08-2014 at 11:33 AM.
Old 04-09-2014 | 01:35 AM
  #6  
XxChrisxX's Avatar
Thread Starter
Desert Cruiser
 
Joined: Apr 2009
Posts: 72
Likes: 0
From: Palmdale, CA
Just going with the O2, got the oem part for a little over 300. Crossing my fingers that this solves the problem and the cat is ok
Old 04-09-2014 | 01:39 AM
  #7  
RXeligion's Avatar
The X is silent
 
Joined: Mar 2011
Posts: 688
Likes: 1
From: New Lebanon, Ohio
Before you buy a new MAF sensor, buy a $5 can of electrical contact cleaner, clean your MAF, and see if it solves your issues.
Old 04-16-2014 | 03:59 PM
  #8  
XxChrisxX's Avatar
Thread Starter
Desert Cruiser
 
Joined: Apr 2009
Posts: 72
Likes: 0
From: Palmdale, CA
Originally Posted by RXeligion
Before you buy a new MAF sensor, buy a $5 can of electrical contact cleaner, clean your MAF, and see if it solves your issues.
Absolutely. The mechanic said it was going bad, not really definitive. I heard that second hand and the guy wouldnt take the time to tell me the what and why. Haven't been screwed at this dealership yet, but im not going to buy a part with no explanation.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tbiggybig
RX-8 Discussion
6
08-13-2016 07:30 PM
uZu
New Member Forum
13
12-30-2015 01:35 PM
athikerguy4life
RX-8 Discussion
2
09-09-2015 09:57 AM
LMURailsplitter02
New Member Forum
1
09-06-2015 11:56 PM
Eirulisse
New Member Forum
13
08-15-2015 01:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 04:25 AM.