Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

P0031 after resetting PCM :-(

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-25-2008 | 09:14 PM
  #1  
trancesimulator's Avatar
Thread Starter
Registered
iTrader: (4)
 
Joined: Apr 2006
Posts: 55
Likes: 0
From: CA
P0031 after resetting PCM :-(

I had a CEL p0037 since i gutted my cat and added a wideband.

But just yesterday i took off my pulley kit and installed my Injen intake and put OEM pulleys back on. I got in my car turned ignition on (not starting car) and press brake 20times rapidly oil pressure sweeped half way.

Well after i did that i noticed my AFR changed to being really rich. before i installed and cleared the PCM my aft wher just right around 15.0 crusiing now there in the 11 and 12's.

why would it do it right after i resetted my PCM.????

can anyone help?
Old 10-25-2008 | 09:17 PM
  #2  
05rex8's Avatar
sold the 8... :(
iTrader: (7)
 
Joined: Feb 2008
Posts: 4,917
Likes: 0
I don't know why it would do it, but it means your front O2 sensor is bad
Old 10-25-2008 | 11:22 PM
  #3  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 46
From: Streetsboro, OH
Resetting the PCM (brake pedal) resets the fuel trim.
Give it a few drive cycles and see if it goes back to what it was.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OnebaddRx8
Series I Trouble Shooting
24
08-25-2019 11:34 PM
fistofmeat
Series I Trouble Shooting
8
10-07-2016 12:15 PM
05rx8mazda
RX-8 Parts For Sale/Wanted
18
11-28-2015 09:42 AM
cliffkemp
Series I Trouble Shooting
7
10-03-2015 11:11 PM
ErwinN
Series I Tech Garage
1
09-23-2015 09:29 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: P0031 after resetting PCM :-(



All times are GMT -5. The time now is 05:51 PM.