Power rear windows?
#26
printf("</%i pistons",3);
Join Date: Dec 2006
Location: I'm a yankee trapped in Houston!!
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know where one could buy just the rear window & hinge? I kinda wanna play around with some ideas, but I'd like some room for error...
#27
Registered User
Join Date: Apr 2006
Location: Beavercreek, OH
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I would like to get the rear windows powered. I like having them open, and it is a pain to close the passenger side one while driving. Plus I think it would be a neat add on feature.
I talked to a guy at a car audio shop in town and he wasnt too sure it would work. I agreed, the travel on different motors would take a while to figure out which one/type would work the best.
I talked to a guy at a car audio shop in town and he wasnt too sure it would work. I agreed, the travel on different motors would take a while to figure out which one/type would work the best.
#28
printf("</%i pistons",3);
Join Date: Dec 2006
Location: I'm a yankee trapped in Houston!!
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Well, as soon as I get a weekend that isn't chock-full of crap to do I'm going to experiment with some things. Hopefully I'll get some results that will give the more experienced fabricators here a place to start.
All I know is that the first person to pull this off could made a damn killing selling it to everyone on these boards...
All I know is that the first person to pull this off could made a damn killing selling it to everyone on these boards...
#29
RIP My beloved SS
Join Date: Aug 2007
Location: Jacksonville, NC
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Well, since I just got finished replacing my rear driver door, I can tell you from experience that there are no airbags in it, and that it is fairly open inside to mount a small motor. I am sure an Expedition motor would be about the right travel as well...
#30
Hit & Run Magnet
iTrader: (3)
imo, the motor travel distance would be negligible and any motor would work. the gap looks about the same as any generic chrysler minivan. im pretty sure you could easily install one of those motors in the place of the current opener-thing-y. :P
the only real problem i see would be the wiring. i think someone's best bet is to wire it behind the rear seats and through the center console. probably mount the buttons in that empty button array near the coin holder on the left side.
the only real problem i see would be the wiring. i think someone's best bet is to wire it behind the rear seats and through the center console. probably mount the buttons in that empty button array near the coin holder on the left side.
#34
I don't buy Kool-Aid
I keep my back windows open all year. When it rains then I reach back and close them. I like them open. It makes the car look dif. But having them power would be cool. That and a power trunk like the caddys!
#35
printf("</%i pistons",3);
Join Date: Dec 2006
Location: I'm a yankee trapped in Houston!!
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Well, I did some experimenting and I learned some neat things.
Somthing that I found to be interesting was where the hinge "defaults" the possition of the rear window. When you disconnect the elbow joint that lets you open and close the window, don't be suprized if it flings open as if it were trying to escape from the rest of the vehicle. When disconnected, the rear window will open about 50-60 degrees before you feel any resistance.
Getting a small motor or actuator to mount in place of the stock elbow joint is simple - the stock support is pretty thick and sturdy...
...however, finding a place to run the damn wire is proving to be more than my *** can fabricate a solution for
Somthing that I found to be interesting was where the hinge "defaults" the possition of the rear window. When you disconnect the elbow joint that lets you open and close the window, don't be suprized if it flings open as if it were trying to escape from the rest of the vehicle. When disconnected, the rear window will open about 50-60 degrees before you feel any resistance.
Getting a small motor or actuator to mount in place of the stock elbow joint is simple - the stock support is pretty thick and sturdy...
...however, finding a place to run the damn wire is proving to be more than my *** can fabricate a solution for
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#36
I don't buy Kool-Aid
![Lightbulb](https://www.rx8club.com/images/icons/icon3.gif)
Well, I did some experimenting and I learned some neat things.
Somthing that I found to be interesting was where the hinge "defaults" the possition of the rear window. When you disconnect the elbow joint that lets you open and close the window, don't be suprized if it flings open as if it were trying to escape from the rest of the vehicle. When disconnected, the rear window will open about 50-60 degrees before you feel any resistance.
Getting a small motor or actuator to mount in place of the stock elbow joint is simple - the stock support is pretty thick and sturdy...
...however, finding a place to run the damn wire is proving to be more than my *** can fabricate a solution for![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Somthing that I found to be interesting was where the hinge "defaults" the possition of the rear window. When you disconnect the elbow joint that lets you open and close the window, don't be suprized if it flings open as if it were trying to escape from the rest of the vehicle. When disconnected, the rear window will open about 50-60 degrees before you feel any resistance.
Getting a small motor or actuator to mount in place of the stock elbow joint is simple - the stock support is pretty thick and sturdy...
...however, finding a place to run the damn wire is proving to be more than my *** can fabricate a solution for
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Scratchhead](https://www.rx8club.com/images/smilies/scratchhead.gif)
#37
Hit & Run Magnet
iTrader: (3)
you'd have to take off the door panels and run it through the rubber wire holder thing. if there is one. i dunno if the back doors have them. i dont know if they have any electronics. if they do, you're in luck. then run it under the back seats to the center console. and under that. then under the dash to the empty button next to the DSC button.
maybe its possible to simply tap a power source and control it remotely?
maybe its possible to simply tap a power source and control it remotely?
#38
Registered User
Join Date: Jul 2007
Location: Ocean City, MD
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
ok i have a question. my friend has an 04 330ci and the rear windows are like ours but they are power. im not sure, but with the right configuration, it shouldn't b TOO hard to get the motor, actuator, wiring, and even the buttons on the windows from a totaled one or sumtin and install them on ours. i mean i dont kno a damn thing about customizing, but BMW has the setup we are "asking" for, just need sumone to put sum time in it.
Thread
Thread Starter
Forum
Replies
Last Post
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM